MAX S8 with Quattro LNB
Added by Mark Lee over 5 years ago
anyone had the luck to configure the Quattro LNB with Digital Devices MAX S8 ?
i have used fmode=2
however no luck
any other configuration needs to be taken care of ?
Replies (2)
RE: MAX S8 with Quattro LNB - Added by Carsten Wegner over 5 years ago
Hi,
currently I am using the Digital Devices Octopus NET - S2 Max with 8 tuners, which should be built on the same tuner component. I've got Panasonic SAT>IP capable TVs, one TV connected to >TVheadend>Octopus, the other TV is connected directly to the Octopus, without TVheadend in the middle. Maybe this will help?
But if you're looking for running the Max S8 on your OS (drivers) or using the internal Max S8 PCI card as a tuner in TVheadend I can't help.
Of cause, you could always split up your config in two systems: (A) one with the Max S8 and software offering it via standard SAT>IP network protocol and (B) another system running TVheadend and using the SAT>IP server of system A - hence building your own fake Octopus NET.
For me, having little spare time, it was a natural decision to go on with something functioning right OOB. That's why I ended up with the Octopus NET.
Kind regards!
RE: MAX S8 with Quattro LNB - Added by Bernd Nebendahl over 5 years ago
Hello,
I'm using a Digital Devices Max S8x without problem. If the problem still persists I can send screenshots of the configuration settings I'm using.
Bernd