New to tvh can't find channels rpi uhat

Hello.
I'm running tvh on a raspberry pi with the DVB TV uHAT the os is rapbian.
I ran the wizard and selected the muxes for my area but scanning gives me only FAIL.
Debug output:

2018-10-29 14:44:39.911 mpegts: 490MHz in DVB-T Network - tuning on Sony CXD2880 #0 : DVB-T #0
2018-10-29 14:44:39.920 subscription: 0011: "scan" subscribing to mux "490MHz", weight: 6, adapter: "Sony CXD2880 #0 : DVB-T #0", network: "DVB-T Network", service: "Raw PID Subscription" 
2018-10-29 14:44:44.911 mpegts: 490MHz in DVB-T Network - scan no data, failed
2018-10-29 14:44:44.917 subscription: 0011: "scan" unsubscribing

dmsg:

[   39.025524] cxd2880 spi0.0: DVB: adapter 0 frontend 0 frequency 0 out of range (174000000..862000000)
[   42.902905] NOHZ: local_softirq_pending 42
[  171.051815] random: crng init done
[  171.051839] random: 7 urandom warning(s) missed due to ratelimiting
[  420.214582] cxd2880: cxd2880_set_frontend: sys:3 freq:674000000 bw:8
[  421.235650] cxd2880: cxd2880_set_frontend: tune result 0
[  425.236488] cxd2880: cxd2880_set_frontend: sys:3 freq:738000000 bw:8
[  426.259938] cxd2880: cxd2880_set_frontend: tune result 0
[  433.946305] cxd2880: cxd2880_set_frontend: sys:3 freq:570000000 bw:8
[  434.970142] cxd2880: cxd2880_set_frontend: tune result 0
[  438.960603] cxd2880: cxd2880_set_frontend: sys:3 freq:626000000 bw:8
[  439.983860] cxd2880: cxd2880_set_frontend: tune result 0
[  443.974584] cxd2880: cxd2880_set_frontend: sys:3 freq:594000000 bw:8
[  444.998728] cxd2880: cxd2880_set_frontend: tune result 0
[  448.987872] cxd2880: cxd2880_set_frontend: sys:3 freq:490000000 bw:8
[  450.011402] cxd2880: cxd2880_set_frontend: tune result 0
[  454.790209] cxd2880: cxd2880_set_frontend: sys:3 freq:530000000 bw:8
[  455.814091] cxd2880: cxd2880_set_frontend: tune result 0
[  459.797199] cxd2880: cxd2880_set_frontend: sys:3 freq:546000000 bw:8
[  460.820184] cxd2880: cxd2880_set_frontend: tune result 0
[  519.566553] cxd2880: cxd2880_set_frontend: sys:3 freq:490000000 bw:8
[  520.589998] cxd2880: cxd2880_set_frontend: tune result 0

any help for a newbie?

Replies (5)

RE: New to tvh can't find channels rpi uhat - Added by Mark Clarkstone about 6 years ago

Sure.

I have a TV HAT attached to my Pi picking up Sutton Coldfield perfectly. Do you know your transmitter?

RE: New to tvh can't find channels rpi uhat - Added by Phill B about 6 years ago

I got it working!
The premade muxes are outdated so I had to google a lot to find the right settings for my area!

RE: New to tvh can't find channels rpi uhat - Added by Nick Stevens about 6 years ago

Hi Phil,

I am only able to find 7 channels - can you point me in the right direction to where you found the info requuired and how to set up? I am a complete noob to all this... Tnx.

RE: New to tvh can't find channels rpi uhat - Added by Tomas Oqvist almost 6 years ago

Phill B wrote:

I got it working!
The premade muxes are outdated so I had to google a lot to find the right settings for my area!

Which city are you in? I have the same gear (RPi3 + uHat) and have been desperataly trying to scan channels from the Stockholm-Nacka transceiver. Occasionally I have managed to get channels for Teracom Mux 1 (490 MHz), e.g. SVT1, SVT2, etc.

So far though, I haven't been able to stream anything from those channels. Today I exchanged my RPi2 for a RPi3, but now I get only failed scan from the 490 MHz band.

Any ideas?

RE: New to tvh can't find channels rpi uhat - Added by Tomas Oqvist almost 6 years ago

Turned out to be a faulty antenna cable.

(1-5/5)

Project

General

Profile

Tvheadend