Project

General

Profile

RPi3 + apt-get upgrade -> lots of continuity errors

Added by Stefan N. about 6 years ago

Hi together,

I did an "apt-get upgrade" of my Raspbian Strech Lite from (2018-04-18) and now cannot use TVHeadend any more. I have 2 Hauppauge PC-TV 461e USB sticks that worked fine so far (firmware dvb-demod-m88ds3103.fw from Hauppauge servers), but now produce tons of continuity errors, hundreds in a few seconds, streams are stuck and unwatchable. During the upgrade, the following packages have been touched:

  • bluez-firmware
  • ca-certificates
  • curl
  • dpkg
  • dpkg-dev
  • file
  • firmware-atheros
  • firmware-brcm80211
  • firmware-libertas
  • firmware-misc-nonfree
  • firmware-realtek
  • gnupg
  • gnupg-agent
  • gpgv
  • libcurl3
  • libdpkg-perl
  • libgcrypt20
  • libmagic-mgc
  • libmagic1
  • libpam-systemd
  • libperl5.24
  • libprocps6
  • libraspberrypi-bin
  • libraspberrypi-dev
  • libraspberrypi-doc
  • libraspberrypi0
  • libsystemd0
  • libudev1
  • libwbclient0
  • openssh-client
  • openssh-server
  • openssh-sftp-server
  • patch
  • perl
  • perl-base
  • perl-modules-5.24
  • pi-bluetooth
  • procps
  • raspberrypi-bootloader
  • raspberrypi-kernel
  • raspi-config
  • samba-common
  • shared-mime-info
  • ssh
  • systemd
  • systemd-sysv
  • tzdata
  • udev
  • wget

Does someone have any idea which of these packages might be causing this issue? Is this maybe a known kernel issue or sth. similar?

Best regards

Stefan


Replies (3)

RE: RPi3 + apt-get upgrade -> lots of continuity errors - Added by Gary D about 6 years ago

Try this to force the nice to 100mbit and report back.

Sudo apt install ethtool
/sbin/ethtool -s eth0 speed 100 duplex full autoneg on

If that works you need to run the command at boot as it isn't persistent. Let me know if u need help running it on boot and I'll copy my device file.

RE: RPi3 + apt-get upgrade -> lots of continuity errors - Added by Stefan N. about 6 years ago

Can you explain in which way forcing the NIC to 100MBit/s will solve my issue with the USB DVB-S receivers?

RE: RPi3 + apt-get upgrade -> lots of continuity errors - Added by Gary D about 6 years ago

There are known issues with gigabit adaptor which shares the USB bus. I had similar issues with IPTV streams and it helped a lot. Worth a shot anyway. Only takes a minute to test.

    (1-3/3)