DVBSky S960CI USB not recognized correctly

Hi all,

I'm using a DVBSky S960CI USB box in combination with Intel NUC, LibreElec and Kodi. All in its latest version. Additionally I installed TvHeadend client and server. On the TvHeadend configuration mask called in the browser, it only finds 87 channels from which are some radio channels, other international channels I'm not interested in and only a handful interesting to me.

When I have a look at the tv-adapter tab, I don't see my device, but another one, that seems to use "DVB-S" instead of "DVB-S2" (see screenshot below).

When I enter
dmesg | grep dvb
on the shell, I see the following output:

[ 3.569755] usb 1-3: dvb_usb_v2: found a 'DVBSky S960CI' in warm state
[ 3.570540] usb 1-3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 3.570556] dvbdev: DVB: registering new adapter (DVBSky S960CI)
[ 3.571888] usb 1-3: dvb_usb_v2: MAC address: 00:18:42:54:96:0c
[ 3.699785] Registered IR keymap rc-dvbsky
[ 3.700141] usb 1-3: dvb_usb_v2: schedule remote query interval to 300 msecs
[ 3.700145] usb 1-3: dvb_usb_v2: 'DVBSky S960CI' successfully initialized and connected
[ 3.700175] usbcore: registered new interface driver dvb_usb_dvbsky
[ 7.263434] m88ds3103 6-0068: downloading firmware from file 'dvb-demod-m88ds3103.fw'

Any idea, how I can change the adapter to the one I'm really using and also retreiving all channels?
Before TvHeadend I used VDR as client / server with the same setup, but didn't had that problems.

Thanks and kind regards,

Dirk

tvheadend_adapter_einstellungen.png (58.5 KB) tvheadend_adapter_einstellungen.png

TV-Adapter tab

Replies (5)

RE: DVBSky S960CI USB not recognized correctly - Added by saen acro about 6 years ago

Post result

dmesg |egrep 'dvb|DVB|TV|frontend|tv|DMI' && lsusb

also with sattelte you scan and is NIT (new transponders found in network) enabled

can you compare for example with KingOfSat or LyngSat are all transponders added

RE: DVBSky S960CI USB not recognized correctly - Added by Di One about 6 years ago

Hello,

thanks for your response.
Here the output from:

dmesg |egrep 'dvb|DVB|TV|frontend|tv|DMI' && lsusb
[    0.000000] DMI:                  /NUC6CAYB, BIOS AYAPLCEL.86A.0041.2017.0825.1152 08/25/2017
[    3.243995]  a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers.
[    3.342425]  a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers.
[    3.459513] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11
[    3.459571] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input12
[    3.459630] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input13
[    3.459688] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input14
[    3.459752] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input15
[    3.560277] usb 1-3: dvb_usb_v2: found a 'DVBSky S960CI' in warm state
[    3.560414] usb 1-3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[    3.560429] dvbdev: DVB: registering new adapter (DVBSky S960CI)
[    3.562176] usb 1-3: dvb_usb_v2: MAC address: 00:18:42:54:96:0c
[    3.649111] usb 1-3: DVB: registering adapter 0 frontend 0 (Montage Technology M88DS3103)...
[    3.649328] rc rc1: DVBSky S960CI as /devices/pci0000:00/0000:00:15.0/usb1/1-3/rc/rc1
[    3.679808] Registered IR keymap rc-dvbsky
[    3.679890] input: DVBSky S960CI as /devices/pci0000:00/0000:00:15.0/usb1/1-3/rc/rc1/input17
[    3.680022] usb 1-3: dvb_usb_v2: schedule remote query interval to 300 msecs
[    3.680026] usb 1-3: dvb_usb_v2: 'DVBSky S960CI' successfully initialized and connected
[    3.680053] usbcore: registered new interface driver dvb_usb_dvbsky
[    7.268524] m88ds3103 6-0068: downloading firmware from file 'dvb-demod-m88ds3103.fw'
[    8.283513] usb 1-3: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000)
Bus 002 Device 002: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 8087:0aa7 Intel Corp.
Bus 001 Device 003: ID 0572:960c Conexant Systems (Rockwell), Inc. DVBSky S960C DVB-S2 tuner
Bus 001 Device 002: ID 1058:107c Western Digital Technologies, Inc. Elements Desktop (WDBWLG)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Sorry, the second part of your post I cannot get: What do you exactly mean with:
"also with sattelte you scan and is NIT (new transponders found in network) enabled

can you compare for example with KingOfSat or LyngSat are all transponders added"

Thanks and kind regards,

Dirk

RE: DVBSky S960CI USB not recognized correctly - Added by saen acro about 6 years ago

Second part is to add missing transponders
automatically via NIT (Network discovery)
or manual via both sites

RE: DVBSky S960CI USB not recognized correctly - Added by Di One about 6 years ago

Thanks for your response. That was it, I added a ASTRA 19.2 entry, following this instructions: http://www.minipctv.de/tvheadendserver/tvheadend-konfigurieren/

Now it found all the channels I was looking for. EPG is not working, yet. Also three channels are not part of my channel list in the frontend, even if I added and activated them in the backend. I'll try around and replace them by another instance of that channel.

Thanks a lot and kind regards,

Dirk

RE: DVBSky S960CI USB not recognized correctly - Added by Jack Bamford about 6 years ago

DVBSky S960CI requires dvb-fe-ds3103.fw but did you compile and build the firmware for the Kernal and Linux Version? I use the DVBSky S952 which uses dvb-fe-ds3103.fw on first revision. This is where i messed up i just copied firmware to lib/firmware instead of compiling and building from source code. But DVBSky themselves now recommends you to use the LinuxTV Source Code from 16.04+ with newer Kernel than 4.4.0.

(1-5/5)

Project

General

Profile

Tvheadend