Tvheadend

Do you set network to tuner and enable tuner?

You're still missing a firmware file:

[ 7.037794] si2168 4-0064: Direct firmware load for dvb-demod-si2168-b40-01.fw failed with error -2
[ 7.042346] si2168 4-0064: please install firmware file 'dvb-demod-si2168-b40-01.fw'
[ 7.042372] si2168 4-0064: downloading firmware from file 'dvb-demod-si2168-02.fw'
[ 7.222980] si2168 4-0064: firmware version: B 4.0.4
[ 7.226565] si2157 5-0060: found a 'Silicon Labs Si2157-A30'
[ 7.274570] si2157 5-0060: firmware version: 3.0.5

You also need the dvb-demod-si2168-b40-01.fw firmware file apparently.

saen acro wrote:

Do you set network to tuner and enable tuner?

Hi, thanks for your reply. I didn't set it, but I had a look around and I couldn't locate that setting. I did, however, find on the adapter to select the network. So I set the DVB-T to the network that I created. I then attempted to force scan again and it didn't do anything (I think a loading modal pops up split second and disappears).

I've taken a screenshot of the add network screen that I can see

Robert Cameron wrote:

You're still missing a firmware file:
[...]

You also need the dvb-demod-si2168-b40-01.fw firmware file apparently.

Ahh yup I see it, I was looking out for a red text on my console, this appeared white. I've added the firmware but it doesn't appear to improve it

DMESG:

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.34-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1110 SMP Mon Apr 16 15:18:51 BST 2018
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x3ac00000
[ 0.000000] On node 0 totalpages: 242688
[ 0.000000] free_area_init_node: node 0, pgdat 80c84e40, node_mem_map ba3a1000
[ 0.000000] Normal zone: 2133 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 242688 pages, LIFO batch:31
[ 0.000000] random: fast init done
[ 0.000000] percpu: Embedded 17 pages/cpu @ba34a000 s38720 r8192 d22720 u69632
[ 0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555
[ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 940236K/970752K available (7168K kernel code, 575K rwdata, 2072K rodata, 1024K init, 706K bss, 22324K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x80800000 (8160 kB)
.init : 0x80b00000 - 0x80c00000 (1024 kB)
.data : 0x80c00000 - 0x80c8fd4c ( 576 kB)
.bss : 0x80c96f4c - 0x80d478b4 ( 707 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 25231 entries in 74 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000023] Switching to timer-based delay loop, resolution 52ns
[ 0.000277] Console: colour dummy device 80x30
[ 0.000821] console [tty1] enabled
[ 0.000859] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000898] pid_max: default: 32768 minimum: 301
[ 0.001227] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001260] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002211] Disabling memory control group subsystem
[ 0.002309] CPU: Testing write buffer coherency: ok
[ 0.002718] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.003106] Setting up static identity map for 0x100000 - 0x10003c
[ 0.003240] Hierarchical SRCU implementation.
[ 0.003888] smp: Bringing up secondary CPUs ...
[ 0.004591] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.005334] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.006064] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.006167] smp: Brought up 1 node, 4 CPUs
[ 0.006238] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.006259] CPU: All CPU(s) started in HYP mode.
[ 0.006277] CPU: Virtualization extensions available.
[ 0.007144] devtmpfs: initialized
[ 0.017579] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.017830] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017875] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.018449] pinctrl core: initialized pinctrl subsystem
[ 0.019208] NET: Registered protocol family 16
[ 0.021821] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.026523] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.026555] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.026778] Serial: AMBA PL011 UART driver
[ 0.028415] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.028892] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.059753] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1
[ 0.061282] SCSI subsystem initialized
[ 0.061518] usbcore: registered new interface driver usbfs
[ 0.061586] usbcore: registered new interface driver hub
[ 0.061685] usbcore: registered new device driver usb
[ 0.070072] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-04-16 18:16
[ 0.071382] clocksource: Switched to clocksource arch_sys_counter
[ 0.148787] VFS: Disk quotas dquot_6.6.0
[ 0.148899] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.149103] FS-Cache: Loaded
[ 0.149311] CacheFiles: Loaded
[ 0.158139] NET: Registered protocol family 2
[ 0.158876] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.159006] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.159209] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.159356] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.159417] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.159662] NET: Registered protocol family 1
[ 0.160121] RPC: Registered named UNIX socket transport module.
[ 0.160145] RPC: Registered udp transport module.
[ 0.160165] RPC: Registered tcp transport module.
[ 0.160184] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.161695] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.164446] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.172371] FS-Cache: Netfs 'nfs' registered for caching
[ 0.172978] NFS: Registering the id_resolver key type
[ 0.173028] Key type id_resolver registered
[ 0.173048] Key type id_legacy registered
[ 0.173076] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.174945] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.175093] io scheduler noop registered
[ 0.175115] io scheduler deadline registered (default)
[ 0.175407] io scheduler cfq registered
[ 0.175428] io scheduler mq-deadline registered
[ 0.175449] io scheduler kyber registered
[ 0.177707] BCM2708FB: allocated DMA memory fad00000
[ 0.177750] BCM2708FB: allocated DMA channel 0 bb813000
[ 0.227712] Console: switching to colour frame buffer device 228x61
[ 0.258108] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.258388] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.259104] vc-sm: Videocore shared memory driver
[ 0.259514] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 0.269396] brd: module loaded
[ 0.278428] loop: module loaded
[ 0.278564] Loading iSCSI transport class v2.0-870.
[ 0.279374] libphy: Fixed MDIO Bus: probed
[ 0.279591] usbcore: registered new interface driver lan78xx
[ 0.279808] usbcore: registered new interface driver smsc95xx
[ 0.279987] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.508281] Core Release: 2.80a
[ 0.508388] Setting default values for core params
[ 0.508561] Finished setting default values for core params
[ 0.708988] Using Buffer DMA mode
[ 0.709097] Periodic Transfer Interrupt Enhancement - disabled
[ 0.709265] Multiprocessor Interrupt Enhancement - disabled
[ 0.709428] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.709565] Dedicated Tx FIFOs mode
[ 0.710034] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad14000 dma = 0xfad14000 len=9024
[ 0.710330] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 0.710935] dwc_otg: Microframe scheduler enabled
[ 0.710994] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e6a40
[ 0.717956] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e6da8 length 36
[ 0.724822] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb87e000
[ 0.731743] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.738615] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.745473] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ 0.752337] Init: Port Power? op_state=1
[ 0.759029] Init: Power Port (0)
[ 0.765928] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.772734] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.779510] usb usb1: Product: DWC OTG Controller
[ 0.786413] usb usb1: Manufacturer: Linux 4.14.34-v7+ dwc_otg_hcd
[ 0.793304] usb usb1: SerialNumber: 3f980000.usb
[ 0.800789] hub 1-0:1.0: USB hub found
[ 0.807534] hub 1-0:1.0: 1 port detected
[ 0.814737] dwc_otg: FIQ enabled
[ 0.814742] dwc_otg: NAK holdoff enabled
[ 0.814748] dwc_otg: FIQ split-transaction FSM enabled
[ 0.814758] Module dwc_common_port init
[ 0.815014] usbcore: registered new interface driver usb-storage
[ 0.821907] mousedev: PS/2 mouse device common for all mice
[ 0.828614] IR NEC protocol handler initialized
[ 0.835320] IR RC5 protocol handler initialized
[ 0.842024] IR RC6 protocol handler initialized
[ 0.848720] IR JVC protocol handler initialized
[ 0.855298] IR Sony protocol handler initialized
[ 0.861737] IR SANYO protocol handler initialized
[ 0.868247] IR Sharp protocol handler initialized
[ 0.874622] IR MCE Keyboard/mouse protocol handler initialized
[ 0.881127] IR XMP protocol handler initialized
[ 0.888368] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.895281] bcm2835-cpufreq: min=600000 max=1400000
[ 0.902320] sdhci: Secure Digital Host Controller Interface driver
[ 0.909035] sdhci: Copyright(c) Pierre Ossman
[ 0.916133] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[ 0.923331] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 0.930139] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.938309] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.945076] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.951868] usbcore: registered new interface driver usbhid
[ 0.958480] usbhid: USB HID core driver
[ 0.965795] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0
[ 0.973937] [vc_sm_connected_init]: start
[ 0.984058] [vc_sm_connected_init]: end - returning 0
[ 0.991325] Initializing XFRM netlink socket
[ 0.998118] NET: Registered protocol family 17
[ 1.004940] Key type dns_resolver registered
[ 1.012011] Registering SWP/SWPB emulation handler
[ 1.019321] registered taskstats version 1
[ 1.031989] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 1.038850] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[ 1.047556] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 1.054482] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 1.061449] Indeed it is in host mode hprt0 = 00021501
[ 1.182107] sdhost: log_buf bad13000 (fad13000)
[ 1.225595] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.233887] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.242090] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.251525] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.271418] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.278948] of_cfs_init
[ 1.285596] of_cfs_init: OK
[ 1.292592] Waiting for root device /dev/mmcblk0p7...
[ 1.298148] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.298322] Indeed it is in host mode hprt0 = 00001101
[ 1.408825] mmc1: new high speed SDIO card at address 0001
[ 1.472812] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.486131] mmc0: new high speed SDHC card at address aaaa
[ 1.493163] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[ 1.507287] mmcblk0: p1 p2 < p5 p6 p7 >
[ 1.531708] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
[ 1.538461] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.545832] hub 1-1:1.0: USB hub found
[ 1.552633] hub 1-1:1.0: 4 ports detected
[ 1.565954] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[ 1.572838] VFS: Mounted root (ext4 filesystem) readonly on device 179:7.
[ 1.590357] devtmpfs: mounted
[ 1.600267] Freeing unused kernel memory: 1024K
[ 1.881440] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.011744] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
[ 2.018814] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.026467] hub 1-1.1:1.0: USB hub found
[ 2.033566] hub 1-1.1:1.0: 3 ports detected
[ 2.042723] systemd[1]: System time before build time, advancing clock.
[ 2.141507] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
[ 2.151817] NET: Registered protocol family 10
[ 2.160071] Segment Routing with IPv6
[ 2.180164] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.226616] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 2.234919] systemd[1]: Detected architecture arm.
[ 2.272248] usb 1-1.3: New USB device found, idVendor=2040, idProduct=0265
[ 2.272258] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.272265] usb 1-1.3: Product: dualHD
[ 2.272273] usb 1-1.3: Manufacturer: HCW
[ 2.272280] usb 1-1.3: SerialNumber: 0013887060
[ 2.326033] systemd[1]: Set hostname to <pioctober>.
[ 2.763944] systemd[1]: Listening on Journal Socket.
[ 2.780245] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.781464] usb 1-1.1.1: new high-speed USB device number 5 using dwc_otg
[ 2.804028] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.820143] systemd[1]: Listening on Syslog Socket.
[ 2.836752] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.853282] systemd[1]: Reached target Swap.
[ 2.869816] systemd[1]: Listening on udev Kernel Socket.
[ 2.911907] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
[ 2.911918] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.198631] libphy: lan78xx-mdiobus: probed
[ 3.211794] i2c /dev entries driver
[ 3.432558] EXT4-fs (mmcblk0p7): re-mounted. Opts: (null)
[ 3.554599] systemd-journald[93]: Received request to flush runtime journal from PID 1
[ 4.404795] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.416721] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 4.611260] media: Linux media interface: v0.10
[ 4.622389] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 4.630796] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006
[ 4.632745] usbcore: registered new interface driver brcmfmac
[ 4.652544] Linux video capture interface: v2.00
[ 4.765252] em28xx 1-1.3:1.0: New device HCW dualHD 480 Mbps (2040:0265, interface 0, class 0)
[ 4.765270] em28xx 1-1.3:1.0: DVB interface 0 found: isoc
[ 4.765446] em28xx 1-1.3:1.0: chip ID is em28174
[ 5.004023] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[ 5.004576] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
[ 5.791222] uart-pl011 3f201000.serial: no DMA platform data
[ 5.861587] random: crng init done
[ 6.079678] em28xx 1-1.3:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x97e3c1c8
[ 6.079689] em28xx 1-1.3:1.0: EEPROM info:
[ 6.079698] em28xx 1-1.3:1.0: microcode start address = 0x0004, boot configuration = 0x01
[ 6.092557] em28xx 1-1.3:1.0: AC97 audio (5 sample rates)
[ 6.092566] em28xx 1-1.3:1.0: 500mA max power
[ 6.092580] em28xx 1-1.3:1.0: Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e
[ 6.093104] em28xx 1-1.3:1.0: Identified as Hauppauge WinTV-dualHD DVB (card=99)
[ 6.106743] tveeprom: Hauppauge model 204109, rev B3I6, serial# 13887060
[ 6.106750] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
[ 6.106759] tveeprom: TV standards PAL NTSC PAL SECAM PAL ATSC/DVB Digital (eeprom 0xfc)
[ 6.106764] tveeprom: audio processor is None (idx 0)
[ 6.106770] tveeprom: has no radio, has IR receiver, has no IR transmitter
[ 6.106786] em28xx 1-1.3:1.0: dvb set to isoc mode.
[ 6.107301] usbcore: registered new interface driver em28xx
[ 6.148810] em28xx 1-1.3:1.0: Binding DVB extension
[ 6.185300] i2c i2c-4: Added multiplexed i2c bus 5
[ 6.185322] si2168 4-0064: Silicon Labs Si2168-B40 successfully identified
[ 6.185333] si2168 4-0064: firmware version: B 4.0.2
[ 6.198654] si2157 5-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
[ 6.198757] dvbdev: DVB: registering new adapter (1-1.3:1.0)
[ 6.198776] em28xx 1-1.3:1.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[ 6.200564] em28xx 1-1.3:1.0: DVB extension successfully initialized
[ 6.200585] em28xx: Registered (Em28xx dvb Extension) extension
[ 6.232870] em28xx 1-1.3:1.0: Registering input extension
[ 6.233279] Registered IR keymap rc-hauppauge
[ 6.233789] rc rc0: 1-1.3:1.0 IR as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/rc/rc0
[ 6.234021] input: 1-1.3:1.0 IR as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/rc/rc0/input0
[ 6.234061] em28xx 1-1.3:1.0: Input extension successfully initialized
[ 6.234069] em28xx: Registered (Em28xx Input Extension) extension
[ 6.555748] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 6.785453] IPv6: ADDRCONF: wlan0: link is not ready
[ 6.785492] brcmfmac: power management disabled
[ 7.053871] IPv6: ADDRCONF: eth0: link is not ready
[ 7.343748] si2168 4-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[ 7.544336] si2168 4-0064: firmware version: B 4.0.11
[ 7.547810] si2157 5-0060: found a 'Silicon Labs Si2157-A30'
[ 7.595952] si2157 5-0060: firmware version: 3.0.5
[ 7.595999] em28xx 1-1.3:1.0: DVB: adapter 0 frontend 0 frequency 0 out of range (42000000..870000000)
[ 10.202833] IPv6: ADDRCONF: wlan0: link becomes ready
[ 12.110335] Bluetooth: Core ver 2.22
[ 12.110436] NET: Registered protocol family 31
[ 12.110440] Bluetooth: HCI device and connection manager initialized
[ 12.110456] Bluetooth: HCI socket layer initialized
[ 12.110467] Bluetooth: L2CAP socket layer initialized
[ 12.110488] Bluetooth: SCO socket layer initialized
[ 12.124199] Bluetooth: HCI UART driver ver 2.3
[ 12.124209] Bluetooth: HCI UART protocol H4 registered
[ 12.124212] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 12.124324] Bluetooth: HCI UART protocol Broadcom registered
[ 12.389238] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.389245] Bluetooth: BNEP filters: protocol multicast
[ 12.389257] Bluetooth: BNEP socket layer initialized
[ 12.438932] Bluetooth: RFCOMM TTY layer initialized
[ 12.438962] Bluetooth: RFCOMM socket layer initialized
[ 12.438987] Bluetooth: RFCOMM ver 1.11
[ 12.727434] fuse init (API version 7.26)
[ 16.809441] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
@

Did you see this page?

https://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-dualHD

The link to the recommended firmware is different to the one you used, though it could point to the same file.

I have a similar but older device (PCTV triplestick) and your dmesg output looks very similar to mine. Are you sure the tuner is enabled (Configuration -> DVB Inputs -> TV Adapters)? Mine doesn't work if both DVB-T and DVB-C are enabled at the same time.

Dave Pickles wrote:

Did you see this page?

https://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-dualHD

The link to the recommended firmware is different to the one you used, though it could point to the same file.

I have a similar but older device (PCTV triplestick) and your dmesg output looks very similar to mine. Are you sure the tuner is enabled (Configuration -> DVB Inputs -> TV Adapters)? Mine doesn't work if both DVB-T and DVB-C are enabled at the same time.

Hi yeah i did see that. I tried that firmware and it didn't work, and then I found forum post with another link (not sure if they were exactly the same).

But I have managed to resolve the issue. For some reason my TV headend didn't allow me to login, it kept on stating that the username and password were incorrect (even though I had used exactly the same credentials - it was saved in chrome). I then had kill all the sessions ('ps -ALL | tvheadend' and then killed the process). Then I had to start up tvheadned as 'tvheadend -C'. This popped up the wizard which had terminated on originally. When I went through the wizard everything scanned and found all the channels and now everything is working.

I can't determine what was wrong with it, compared to when I did it manually.

Now my issue is that my username and password was not working when I tried to connect this to Livechannels on Android TV. I'll keep trying to troubleshoot it before asking for help.