OctopusNet DVB-C
Added by Matthias Schulz about 7 years ago
Hello and good evening.
I have a problem where, I can't get any further. I own an OctopusNet (DVB-C/DVB-T2) and try to access the device from Tvheadend. Unfortunately I only get error messages. Everything works fine with the DD-TV software.
2017-09-01 21:23:52.536 subscription: 0042: "scan" unsubscribing 2017-09-01 21:26:09.693 http: 192.168.178.54: HTTP/1.1 POST /api/hardware/tree -- 400 2017-09-01 21:26:10.256 http: 192.168.178.54: HTTP/1.1 POST /api/mpegts/input/network_list -- 400
2017-09-01 21:50:47.198 mpegts: 121MHz in DVB-C Network - tuning on SAT>IP DVB-C Tuner #1 (192.168.178.34) 2017-09-01 21:50:47.199 subscription: 015D: "scan" subscribing to mux "121MHz", weight: 2, adapter: "SAT>IP DVB-C Tuner #1 (192.168.178.34)", network: "DVB-C Network", service: "Raw PID Subscription" 2017-09-01 21:50:47.199 mpegts: 322MHz in DVB-C Network - tuning on SAT>IP DVB-C Tuner #2 (192.168.178.34) 2017-09-01 21:50:47.199 subscription: 015E: "scan" subscribing to mux "322MHz", weight: 2, adapter: "SAT>IP DVB-C Tuner #2 (192.168.178.34)", network: "DVB-C Network", service: "Raw PID Subscription" 2017-09-01 21:50:47.209 satip: SAT>IP DVB-C Tuner #1 (192.168.178.34) - RTSP SETUP error -5 (Eingabe-/Ausgabefehler) [6-404] 2017-09-01 21:50:47.210 satip: SAT>IP DVB-C Tuner #2 (192.168.178.34) - RTSP SETUP error -5 (Eingabe-/Ausgabefehler) [6-404]
Any recommendations?
Replies (5)
RE: OctopusNet DVB-C - Added by Mark Clarkstone about 7 years ago
Try enabling "Send full PLAY cmd" in the tuner settings :).
RE: OctopusNet DVB-C - Added by Matthias Schulz about 7 years ago
Thanks for your advice, but I still get error messages.
Here is some more information that might be helpful.
Versions:
Tvheadend: 4.2.3-39~ge195d1845~xenial
OctopusNet:
1.0.81
Under the menu item "Configuration > DVB Inputs > Muxes", the column "Scan result" shows "fail" everywhere. And I still see the following error messages:
2017-09-03 08:27:40.093 mpegts: 145MHz in DVB-C Network - tuning on SAT>IP DVB-C Tuner #1 (192.168.178.34) 2017-09-03 08:27:40.094 subscription: 0022:"scan" subscribing to mux "145MHz", weight: 2, adapter:"SAT>IP DVB-C Tuner #1 (192.168.178.34)", network:"DVB-C Network", service:"Raw PID Subscription" 2017-09-03 08:27:40.094 mpegts: 322MHz in DVB-C Network - tuning on SAT>IP DVB-C Tuner #2 (192.168.178.34) 2017-09-03 08:27:40.094 subscription: 0023:"scan" subscribing to mux "322MHz", weight: 2, adapter:"SAT>IP DVB-C Tuner #2 (192.168.178.34)", network:"DVB-C Network", service:"Raw PID Subscription" 2017-09-03 08:27:40.102 satip: SAT>IP DVB-C Tuner #1 (192.168.178.34) - RTSP SETUP error -5 (Input/Output Error)[6-404] 2017-09-03 08:27:40.106 satip: SAT>IP DVB-C Tuner #2 (192.168.178.34) - RTSP SETUP error -5 (Input/Output Error)[6-404] 2017-09-03 08:27:45:45.094 mpegts: 322MHz in DVB-C Network - scan no data, failed 2017-09-03 08:27:45:45.094 subscription: 0023:"scan" unsubscribing 2017-09-03 08:27:45:45.094 mpegts: 145MHz in DVB-C Network - scan no data, failed 2017-09-03 08:27:45:45.094 subscription: 0022:"scan" unsubscribing
Do you need more information?
RE: OctopusNet DVB-C - Added by saen acro about 7 years ago
Try to use manual set frequencies until NIT in working mux found.
RE: OctopusNet DVB-C - Added by Matthias Schulz about 7 years ago
Tvheadend is new to me, so I don't know where I can define the frequencies. Should I manually add a mux? What does the abbreviation "NIT"stand for?
-- Edit:
I have taken the data from the VDR (see below) and created a new "MUX". I still see the error messages.
Tvheadend:
vdr.conf
Das Erste HD;ARD:161000:C0M256:C:6900:5101=27:5102=deu@3,5103=mis@3;5106=deu@106:5104;5105=deu:0:10301:1:1019:0
Log file:
2017-09-03 11:13:05.038 mpegts: 161MHz in DVB-C Network - tuning on SAT>IP DVB-C Tuner #1 (192.168.178.34) 2017-09-03 11:13:05.038 subscription: 0065: "scan" subscribing to mux "161MHz", weight: 2, adapter: "SAT>IP DVB-C Tuner #1 (192.168.178.34)", network: "DVB-C Network", service: "Raw PID Subscription" 2017-09-03 11:13:05.045 satip: SAT>IP DVB-C Tuner #1 (192.168.178.34) - RTSP SETUP error -5 (Eingabe-/Ausgabefehler) [6-400] 2017-09-03 11:13:10.039 mpegts: 161MHz in DVB-C Network - scan no data, failed 2017-09-03 11:13:10.039 subscription: 0065: "scan" unsubscribing
If I enter the value 161000 under "Frequency" then after saving the value is 161000000. Bug or feature?
Tvheadend.png (53.2 KB) Tvheadend.png | MUX |
RE: OctopusNet DVB-C - Added by tavo oli over 4 years ago
did you find a solution?
exact same problem here