Project

General

Profile

how to read cline?

Added by hacksat hacksat almost 8 years ago

Hello everyone, how do I read a cline with TVHeadend?
thanks


Replies (16)

RE: how to read cline? - Added by Robert Cameron almost 8 years ago

I am unfamiliar with a "cline", what is it?

RE: how to read cline? - Added by hacksat hacksat almost 8 years ago

Hello I'm sorry if I'm unclear state, the C-line Oscam
like C: hostname.com port username password
I can read these C-line with TVHeadend?
thanks

RE: how to read cline? - Added by Joe User almost 8 years ago

clines are configured in oscam and then Tvheadend needs to be configured to use oscam (already covered many times here.) Cline help is probably best asked for elsewhere...

RE: how to read cline? - Added by saen acro almost 8 years ago

Robert Cameron wrote:

I am unfamiliar with a "cline", what is it?

CCCam line
already there is a feature request

https://tvheadend.org/issues/2987

RE: how to read cline? - Added by hacksat hacksat almost 8 years ago

hi, thanks for the answer, I saw the link you received me with the version that I have works? i have this: HTS Tvheadend 4.1-2334~gf30b504~trusty !!!

this is the link : https://tvheadend.org/boards/4/topics/2649 right?
thanks

RE: how to read cline? - Added by saen acro almost 8 years ago

More easy to put Oscam in middle ;)

RE: how to read cline? - Added by hacksat hacksat almost 8 years ago

I can get more info about please let :P

RE: how to read cline? - Added by Valerio Salerno almost 8 years ago

Hi i have the same problem please help me... thanks in advance I believe in you..

RE: how to read cline? - Added by Franco Gaetano almost 8 years ago

I can not even me! I have the 4.1-2334 version! can anyone tell me the steps in a simpler way? thanks, I'm new in this forum !!!

RE: how to read cline? - Added by hacksat hacksat almost 8 years ago

Hi, I read a bit around And I saw Che clicking CA's , TVHeandend has the possibility to read the Cline?
I filled out in any case by adding the data as you can see in the picture
http://prntscr.com/ddsdmd

is the right way?

RE: how to read cline? - Added by Jonathan Thomson almost 8 years ago

I wrote a blog article on how to integrate OSCam with TVHeadend here

TVHeadend cannot read the CLine directly, you need to proxy it to TVHeadend using the codeword client in TVHeadend and a suitable virtual reader at the OSCam end - instructions all in the link above.

RE: how to read cline? - Added by hacksat hacksat almost 8 years ago

Hello I read very carefully your guide, but at the moment I do not get one thing straight! If I have a simple Cline I bought from a supplier and gave me so type:

C: hostname port username password

I can use it in this way to avoid oscam since I've already purchased the cline?
are not very practical situation I would, I would just start with cline of oscam tvheandend, thanks for your patience
thanks :)

RE: how to read cline? - Added by Joe User almost 8 years ago

I am not sure of the exact rules here, but I would assume the discussion of illegal pay servers is forbidden...

RE: how to read cline? - Added by Jonathan Thomson almost 8 years ago

Joe User wrote:

I am not sure of the exact rules here, but I would assume the discussion of illegal pay servers is forbidden...

That's a good point! @domenic ciciarelli I would re-word your post to remove any details that might land you in trouble on this board ;)

For the record though, the use of OSCam with TVHeadend is not illegal per-se - OSCam works absolutely fine with a genuine viewing card and a USB card reader and is the only way I know of decrypting TV legitimately in TVHeadend.

I will proceed with my answer on the basis that I am covering integrating OSCam with TVHeadend, the method of decryption at the OSCam end is irrelevant to the conversation (OSCam will proxy whatever readers you have, legitimate or otherwise, so I have no need to go into any detail on the reader side of the configuration).

Let's get back to basics, TVHeadend DOES NOT support CLines (rightly so as it would make piracy too easy). For TVHeadend to decrypt pay tv, it needs a CAM (conditional access module) to pass the decryption keys in a format it understands. This is where OSCam comes in.

In OSCam, you set up your readers (I won't help you here) and then you configure OSCam and TVHeadend to talk to each other in the way I describe in my guide. The guide is step-for-step what you need to do so you just need to follow my instructions.

I can't really give you any more advice, just follow the guide.

RE: how to read cline? - Added by hacksat hacksat almost 8 years ago

hi thanks for the answer, I can see from tvheandend directly with my zgemmah2h?

RE: how to read cline? - Added by hacksat hacksat almost 8 years ago

Hello, but I'm not asking anything illegal, my question is different, how do I read cccam, I'm interested to know if you can do and how I can do given that they are not expert asked for help in the forum program that I chose for the vision!

    (1-16/16)