Bug/problem: scanning on DVB-S cx24120 hardware not possible ("scan no data, failed" )
Added by a b over 8 years ago
I have this card: https://www.linuxtv.org/wiki/index.php/TechniSat_SkyStar_S2
and its using this driver: https://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/log/?id=refs%2Ftags%2Fv4.6.4&qt=grep&q=cx24120
VDR can scan and then i can tune into the channels that have been find.
When i remove VDR and install tvheadend (4.2 or 4.0) i always get while scanning the message: scan no data, failed
I tried kernel 4.6 and 4.4 and both didnt change much. I reinstalled fully the system - no difference.
In irc linuxstb told me to contact perexg but he was not online at the moment.
I dont know what i could do to fix this problem.
Replies (7)
RE: Bug/problem: scanning on DVB-S cx24120 hardware not possible ("scan no data, failed" ) - Added by Ben Efrati over 8 years ago
Please post dmesg here
RE: Bug/problem: scanning on DVB-S cx24120 hardware not possible ("scan no data, failed" ) - Added by a b over 8 years ago
dmesg is from kernel 4.4
RE: Bug/problem: scanning on DVB-S cx24120 hardware not possible ("scan no data, failed" ) - Added by Ben Efrati over 8 years ago
RE: Bug/problem: scanning on DVB-S cx24120 hardware not possible ("scan no data, failed" ) - Added by a b over 8 years ago
Yes. As you can see in the dmesg i am using LibreELEC. The link you post is from LibreELEC.
In the last line of the dmesg its written "[ 10.864158] cx24120: FW version 1.20.58.2"
Without the file as far as i know nothing would work. Also not VDR.
RE: Bug/problem: scanning on DVB-S cx24120 hardware not possible ("scan no data, failed" ) - Added by zofiel elzofio about 8 years ago
Same problem here.
016-08-15 20:38:57.000 mpegts: 10906V in Astra - scan no data, failed
2016-08-15 20:38:57.000 subscription: 00CD: "scan" unsubscribing
but I try a dvb-fe-tool --femon and the signal is good.
RE: Bug/problem: scanning on DVB-S cx24120 hardware not possible ("scan no data, failed" ) - Added by a b about 8 years ago
zofiel elzofio, did you tune into Astra 19.2? If yes, could you try this frequency:
DVB-S, Frequenz 11836 MHz, Polarisation H, Symbolrate 27500, FEC 3/4
Set modulation to AUTO.
RE: Bug/problem: scanning on DVB-S cx24120 hardware not possible ("scan no data, failed" ) - Added by zofiel elzofio over 6 years ago
thanks, It's working again