SATIP Scan not working
Added by A Ba over 8 years ago
Hi everyone,
could someone please help me. I'm trying to get this to work but always get the same error message. I installed TVheadend stable 4.08 on a debian system. I also have an Octopus.Net Device which is working fine (at leaset DVBViewer and VDR can use it without any problems)
After setting up the Network (DVB-C) and one Mux (in this case 410 MHZ) I assigned the DVB-C Card which has been detected by Tvheadend. It takes about 30secs and then I get this error:
2016-05-16 15:52:57.000 mpegts: 410MHz in Stable - tuning on SAT>IP DVB-C Tuner #3 (192.168.27.55) 2016-05-16 15:52:57.000 opentv-skyuk: registering mux 410MHz in Stable 2016-05-16 15:52:57.004 satip: SAT>IP DVB-C Tuner #3 (192.168.27.55) - RTSP SETUP error -5 (Eingabe-/Ausgabefehler) [6-400] 2016-05-16 15:52:57.005 subscription: 0002: "scan" subscribing to mux "410MHz", weight: 5, adapter: "SAT>IP DVB-C Tuner #3 (192.168.27.55)", network: "Stable", service: "Raw PID Subscription" 2016-05-16 15:53:02.000 mpegts: 410MHz in Stable - scan no data, failed 2016-05-16 15:53:02.001 subscription: 0002: "scan" unsubscribing
I defintly know that the device is working and I know that 410Mhz is also working. Does anyone know what to do here?
Thanks
S
Replies (3)
RE: SATIP Scan not working - Added by A Ba over 8 years ago
Hi,
ok I found something. After using the SATIP Server which is provided by DVB REcordingService it works. This is really strange as this device get it streams provided by the Octopus Device. So Tvheadend has an issue with reading the correct information from the Octopus Net directly. I assume this has something todo with DVB-T/DVB-C mixed Tuner which is provided by the Octopus (See Screenshot attached)
Any ideas?
Thanks
S
hc_001.png (144 KB) hc_001.png |
RE: SATIP Scan not working - Added by A Ba over 8 years ago
Hi again,
sorry to bother you with that but at the moment it seems TVheadend cannot directly handle the Octopus SATIp Server (with DVB-C). If that is the case I would send the Octopus device back but need before I do that I want to be sure that there's nothing wrong in my setup. I posted a few screenshots..
1) As y<ou can see I have two SAT/IP Servers. The dirst one is the Octopus directly the second one is Windows Machine with a DVBViewer/DVBRecording service that provides also a DVB SAT/IP Server.
2) When using the Windows Server it works - as you can see in the logfile below:
3) When using the Octopus directly I get an Input/Output error.
4) I also attached a screenshot with the detailed parameters from teh Octopus. I have installed the latest Beta Firmware to test but there's no change.
Thanks
S
01_DVB_SATIP _server.png (153 KB) 01_DVB_SATIP _server.png | DVB_SATIP _server. | ||
02_Octopus.png (235 KB) 02_Octopus.png | Octopus_SATIP _server. | ||
hc_003.png (152 KB) hc_003.png | Details_Octopus | ||
hc_004.png (156 KB) hc_004.png | Details DVB Server |