noob question about dvb t 2

i'm running open elec latest (6.0.0) on a raspberry pi 2
my usb stick TechnoTrend CT2-4400 is recognized

when scanning i can't find any dvbt 2 mux at all - but watching old dvb t works ok
is there somethingi'm missing?
thanks in advance

Replies (4)

RE: noob question about dvb t 2 - Added by Mark Clarkstone almost 9 years ago

Have you added the DVB-T2 muxes as DVB-T2 and not just DVB-T?

RE: noob question about dvb t 2 - Added by Der Michl almost 9 years ago

yes, i tried adding them manually, with different settings according to google findings for Austria...

but it seems my issues are rather with the way DVB-T2 is transmitted in Austria - seems i need a CI module to unscramble even free TV?!?

RE: noob question about dvb t 2 - Added by Mark Clarkstone almost 9 years ago

Der Michl wrote:

yes, i tried adding them manually, with different settings according to google findings for Austria...

but it seems my issues are rather with the way DVB-T2 is transmitted in Austria - seems i need a CI module to unscramble even free TV?!?

Ouch. Even if the services are scrambled Tvheadend should at least see their names.

RE: noob question about dvb t 2 - Added by Peter B. almost 8 years ago

Similar problem here:
LibreElec (7.0.2) on Raspberry Pi 1 using the same hardware: CT2-4400. Austria, too.

TV adapter shows up in theadend's web-frontend, but even if I enable the listed "Silicon Labs S2168 : DVB-T #0", nothing happens.

Unfortunately, the 4.x documentation for tvheadend (configure_tvheadend) says "NOTE: TEXT REQUIRED" in almost all paragraphs that might be relevant to debug this

Any help/input appreciated.

Thanks in advance

(1-4/4)

Project

General

Profile

Tvheadend