Project

General

Profile

Forums » General »

TVheadEnd Ubuntu 14.04LTS HTS Tvheadend 4.1-1047~g851aebb + TBS8920 DVB-S2 card problems

Added by Info Barra almost 9 years ago

Hi guys

aparently i am not the only one as far as i could read on the forum.

So i am basically new to TVheadEnd and i am trying to configure my DVB card to scan some channels but its giving me the failed scan all the time i have setup the network , choosen the sat etc.. when i make the search it allways fails

it seems ubuntu recognize the DVB card drivers correctly

tvstreamer@tvheadend:/$ lspci -v | grep cx88
        Kernel driver in use: cx8800
        Kernel driver in use: cx88-mpeg driver manager
tvstreamer@tvheadend:/$ dmesg | grep cx88
[    4.253701] cx88[0]: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72,autodetected], frontend(s): 1
[    4.774482] input: cx88 IR (TBS 8920 DVB-S/S2) as /devices/pci0000:00/0000:00:1e.0/0000:06:01.2/rc/rc0/input6
[    4.774538] rc0: cx88 IR (TBS 8920 DVB-S/S2) as /devices/pci0000:00/0000:00:1e.0/0000:06:01.2/rc/rc0
[    4.788558] input: MCE IR Keyboard/Mouse (cx88xx) as /devices/virtual/input/input7
[    4.790057] cx88[0]/2: cx2388x 8802 Driver Manager
[    4.790119] cx88[0]/2: found at 0000:06:01.2, rev: 5, irq: 16, latency: 64, mmio: 0xf7000000
[    4.790286] cx88[0]/0: found at 0000:06:01.0, rev: 5, irq: 16, latency: 64, mmio: 0xf6000000
[    4.791576] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
[    4.791645] cx88[0]/0: registered device video0 [v4l2]
[    4.791793] cx88[0]/0: registered device vbi0
[    4.799748] cx88/2: cx2388x dvb driver version 0.0.9 loaded
[    4.799750] cx88/2: registering cx8802 driver, type: dvb access: shared
[    4.799752] cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72]
[    4.799754] cx88[0]/2: cx2388x based DVB/ATSC card
[    4.799755] cx8802_alloc_frontends() allocating 1 frontend(s)
[    4.802970] DVB: registering new adapter (cx88[0])
[    4.802974] cx88-mpeg driver manager 0000:06:01.2: DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX2                                                       4118)...
[25096.287030] cx88-mpeg driver manager 0000:06:01.2: Direct firmware load failed with error -2
[25096.287031] cx88-mpeg driver manager 0000:06:01.2: Falling back to user helper
[25096.296530] cx88-mpeg driver manager 0000:06:01.2: DVB: adapter 0 frontend 0 frequency 0 out of range (950000.                                                       .2150000)
[25096.297350] cx88-mpeg driver manager 0000:06:01.2: Direct firmware load failed with error -2
[25096.297351] cx88-mpeg driver manager 0000:06:01.2: Falling back to user helper
[25096.300536] cx88-mpeg driver manager 0000:06:01.2: Direct firmware load failed with error -2
[25096.300540] cx88-mpeg driver manager 0000:06:01.2: Falling back to user helper
[26561.540129] cx88-mpeg driver manager 0000:06:01.2: Direct firmware load failed with error -2
[26561.540133] cx88-mpeg driver manager 0000:06:01.2: Falling back to user helper
[26629.274330] cx88-mpeg driver manager 0000:06:01.2: Direct firmware load failed with error -2
[26629.274334] cx88-mpeg driver manager 0000:06:01.2: Falling back to user helper
[26885.376511] cx88-mpeg driver manager 0000:06:01.2: Direct firmware load failed with error -2
[26885.376515] cx88-mpeg driver manager 0000:06:01.2: Falling back to user helper
[26910.621959] cx88-mpeg driver manager 0000:06:01.2: Direct firmware load failed with error -2
[26910.621963] cx88-mpeg driver manager 0000:06:01.2: Falling back to user helper
[27052.588595] cx88-mpeg driver manager 0000:06:01.2: DVB: adapter 0 frontend 0 frequency 6076000 out of range (9                                                       50000..2150000)
[27402.165897] cx88-mpeg driver manager 0000:06:01.2: DVB: adapter 0 frontend 0 frequency 6050000 out of range (9                                                       50000..2150000)

this is the error output on the scan dvb channels

2015-11-24 17:45:13.532 [ INFO] mpegts: 11025V in TVstreamer TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-24 17:45:13.587 [ ERROR] diseqc: failed to disable tone
2015-11-24 17:45:38.820 [ INFO] mpegts: 11025V in TVstreamer TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-24 17:45:38.863 [ ERROR] diseqc: failed to disable tone
2015-11-24 17:48:01.000 [ INFO] mpegts: 3674V in TVstreamer TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-24 17:48:01.000 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument invalid]
[ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune2015-11-24 17:53:51.000
[ INFO] mpegts: 3700V in TVstreamer TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-24 17:53:51.000 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument invalid]

Any ideas will be welcomed in the meanwhile if i find any updates or fixes i will give an update

Thxs


Replies (10)

RE: TVheadEnd Ubuntu 14.04LTS HTS Tvheadend 4.1-1047~g851aebb + TBS6920 DVB-S2 card problems - Added by Mark Clarkstone almost 9 years ago

Well, you appear to be missing firmware.. "Direct firmware load failed with error -2" fix that and try again :)

RE: TVheadEnd Ubuntu 14.04LTS HTS Tvheadend 4.1-1047~g851aebb + TBS6920 DVB-S2 card problems - Added by Info Barra almost 9 years ago

Hi

thxs for your reply

well today i have actually downloaded and compiled the TBS original drivers for my TBS6920 now its showing this

root@tvheadend:/# dmesg | grep cx88
[ 4.183097] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded
[ 4.183208] cx880: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72,autodetected], frontend(s): 1
[ 4.183209] cx880: TV tuner type 4, Radio tuner type -1
[ 4.183409] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded
[ 4.701192] input: cx88 IR (TBS 8920 DVB-S/S2) as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/rc/rc0/input6
[ 4.709157] rc0: cx88 IR (TBS 8920 DVB-S/S2) as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/rc/rc0
[ 4.713151] input: MCE IR Keyboard/Mouse (cx88xx) as /devices/virtual/input/input7
[ 4.753112] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
[ 4.753119] cx880/0: found at 0000:06:01.0, rev: 5, irq: 16, latency: 64, mmio: 0xf6000000
[ 4.785155] cx880/0: registered device video0 [v4l2]
[ 4.797087] cx880/0: registered device vbi0
[ 4.797217] cx880/2: cx2388x 8802 Driver Manager
[ 4.797273] cx880/2: found at 0000:06:01.2, rev: 5, irq: 16, latency: 64, mmio: 0xf7000000
[ 4.809568] cx88/2: cx2388x dvb driver version 0.0.9 loaded
[ 4.809570] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 4.809572] cx880/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72]
[ 4.809574] cx880/2: cx2388x based DVB/ATSC card
[ 4.809575] cx8802_alloc_frontends() allocating 1 frontend(s)
[ 4.813439] DVB: registering new adapter (cx880)

aldo its still giving me error scanning, i have noticed my LNB is a universal type for old Circular antenna dishes, but it has 2 output connectors, cause it actually scans on KU band and C band also. so i had to configure this previously using Switch diseqC on my STB with one sat config on the C band and same Sat config on 2nd port switch with KU band, this way i was able to scan channels on my Linux STB, aldo its not working on my TVheadend with the TBS driver, it allways fails scanning on the channels.

any more ideas i am getting this error on the log output from tvheadend now

2015-11-25 16:38:19.707 [ INFO] mpegts: 3665H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:20.209 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:20.210 [ INFO] mpegts: 3997V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:20.729 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:20.729 [ INFO] mpegts: 3964H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:21.233 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:21.233 [ INFO] mpegts: 3640H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:21.721 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:21.721 [ INFO] mpegts: 3644V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:22.225 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:22.225 [ INFO] mpegts: 3951H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:22.729 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:22.729 [ INFO] mpegts: 3662V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:23.233 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:23.233 [ INFO] mpegts: 3900V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:23.721 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:23.721 [ INFO] mpegts: 3955H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:24.225 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:24.225 [ INFO] mpegts: 3973V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:24.729 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:24.729 [ INFO] mpegts: 3672V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:25.217 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:25.217 [ INFO] mpegts: 3983V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:25.721 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:25.721 [ INFO] mpegts: 3714V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:26.209 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:26.209 [ INFO] mpegts: 3650V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:26.697 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:26.697 [ INFO] mpegts: 4010H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:27.201 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:27.201 [ INFO] mpegts: 11025V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:27.705 [ INFO] subscription: 0010: "scan" subscribing to mux "11025V", weight: 6, adapter: "Conexant CX24116/CX24118 : DVB-S #0", network: "TV", service: "Raw PID Subscription"
2015-11-25 16:38:29.000 [ INFO] mpegts: 11025V in TV - scan no data, failed
2015-11-25 16:38:29.000 [ INFO] subscription: 0010: "scan" unsubscribing
2015-11-25 16:38:29.000 [ INFO] mpegts: 4047V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:29.489 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:29.489 [ INFO] mpegts: 3985H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:30.009 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:30.009 [ INFO] mpegts: 3688H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:30.497 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:30.497 [ INFO] mpegts: 3874V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:31.001 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:31.001 [ INFO] mpegts: 3940V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:31.489 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:31.489 [ INFO] mpegts: 3637H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:31.993 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:31.993 [ INFO] mpegts: 3672H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:32.481 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:32.481 [ INFO] mpegts: 3708V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:32.985 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:32.985 [ INFO] mpegts: 3979V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:33.473 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:33.473 [ INFO] mpegts: 3631H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:33.977 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:33.977 [ INFO] mpegts: 3700V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:34.481 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:34.481 [ INFO] mpegts: 3820V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:34.969 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:34.969 [ INFO] mpegts: 3965V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:35.457 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:35.457 [ INFO] mpegts: 3645H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:35.961 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:35.961 [ INFO] mpegts: 3650H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:36.449 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:36.449 [ INFO] mpegts: 3695H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:36.953 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:36.954 [ INFO] mpegts: 3628H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:37.457 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:37.457 [ INFO] mpegts: 3752V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:37.961 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:37.961 [ INFO] mpegts: 3945H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:38.465 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:38.465 [ INFO] mpegts: 3685V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:38.985 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:38.986 [ INFO] mpegts: 3680H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:39.489 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]

RE: TVheadEnd Ubuntu 14.04LTS HTS Tvheadend 4.1-1047~g851aebb + TBS6920 DVB-S2 card problems - Added by Mark Clarkstone almost 9 years ago

Info Barra wrote:

Hi

thxs for your reply

well today i have actually downloaded and compiled the TBS original drivers for my TBS6920 now its showing this

root@tvheadend:/# dmesg | grep cx88
[ 4.183097] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded
[ 4.183208] cx880: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72,autodetected], frontend(s): 1
[ 4.183209] cx880: TV tuner type 4, Radio tuner type -1
[ 4.183409] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded
[ 4.701192] input: cx88 IR (TBS 8920 DVB-S/S2) as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/rc/rc0/input6
[ 4.709157] rc0: cx88 IR (TBS 8920 DVB-S/S2) as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/rc/rc0
[ 4.713151] input: MCE IR Keyboard/Mouse (cx88xx) as /devices/virtual/input/input7
[ 4.753112] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
[ 4.753119] cx880/0: found at 0000:06:01.0, rev: 5, irq: 16, latency: 64, mmio: 0xf6000000
[ 4.785155] cx880/0: registered device video0 [v4l2]
[ 4.797087] cx880/0: registered device vbi0
[ 4.797217] cx880/2: cx2388x 8802 Driver Manager
[ 4.797273] cx880/2: found at 0000:06:01.2, rev: 5, irq: 16, latency: 64, mmio: 0xf7000000
[ 4.809568] cx88/2: cx2388x dvb driver version 0.0.9 loaded
[ 4.809570] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 4.809572] cx880/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72]
[ 4.809574] cx880/2: cx2388x based DVB/ATSC card
[ 4.809575] cx8802_alloc_frontends() allocating 1 frontend(s)
[ 4.813439] DVB: registering new adapter (cx880)

aldo its still giving me error scanning, i have noticed my LNB is a universal type for old Circular antenna dishes, but it has 2 output connectors, cause it actually scans on KU band and C band also. so i had to configure this previously using Switch diseqC on my STB with one sat config on the C band and same Sat config on 2nd port switch with KU band, this way i was able to scan channels on my Linux STB, aldo its not working on my TVheadend with the TBS driver, it allways fails scanning on the channels.

any more ideas i am getting this error on the log output from tvheadend now

2015-11-25 16:38:19.707 [ INFO] mpegts: 3665H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:20.209 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:20.210 [ INFO] mpegts: 3997V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:20.729 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:20.729 [ INFO] mpegts: 3964H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:21.233 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:21.233 [ INFO] mpegts: 3640H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:21.721 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:21.721 [ INFO] mpegts: 3644V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:22.225 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:22.225 [ INFO] mpegts: 3951H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:22.729 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:22.729 [ INFO] mpegts: 3662V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:23.233 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:23.233 [ INFO] mpegts: 3900V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:23.721 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:23.721 [ INFO] mpegts: 3955H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:24.225 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:24.225 [ INFO] mpegts: 3973V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:24.729 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:24.729 [ INFO] mpegts: 3672V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:25.217 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:25.217 [ INFO] mpegts: 3983V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:25.721 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:25.721 [ INFO] mpegts: 3714V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:26.209 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:26.209 [ INFO] mpegts: 3650V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:26.697 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:26.697 [ INFO] mpegts: 4010H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:27.201 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:27.201 [ INFO] mpegts: 11025V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:27.705 [ INFO] subscription: 0010: "scan" subscribing to mux "11025V", weight: 6, adapter: "Conexant CX24116/CX24118 : DVB-S #0", network: "TV", service: "Raw PID Subscription"
2015-11-25 16:38:29.000 [ INFO] mpegts: 11025V in TV - scan no data, failed
2015-11-25 16:38:29.000 [ INFO] subscription: 0010: "scan" unsubscribing
2015-11-25 16:38:29.000 [ INFO] mpegts: 4047V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:29.489 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:29.489 [ INFO] mpegts: 3985H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:30.009 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:30.009 [ INFO] mpegts: 3688H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:30.497 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:30.497 [ INFO] mpegts: 3874V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:31.001 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:31.001 [ INFO] mpegts: 3940V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:31.489 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:31.489 [ INFO] mpegts: 3637H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:31.993 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:31.993 [ INFO] mpegts: 3672H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:32.481 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:32.481 [ INFO] mpegts: 3708V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:32.985 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:32.985 [ INFO] mpegts: 3979V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:33.473 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:33.473 [ INFO] mpegts: 3631H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:33.977 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:33.977 [ INFO] mpegts: 3700V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:34.481 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:34.481 [ INFO] mpegts: 3820V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:34.969 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:34.969 [ INFO] mpegts: 3965V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:35.457 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:35.457 [ INFO] mpegts: 3645H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:35.961 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:35.961 [ INFO] mpegts: 3650H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:36.449 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:36.449 [ INFO] mpegts: 3695H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:36.953 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:36.954 [ INFO] mpegts: 3628H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:37.457 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:37.457 [ INFO] mpegts: 3752V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:37.961 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:37.961 [ INFO] mpegts: 3945H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:38.465 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:38.465 [ INFO] mpegts: 3685V in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:38.985 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]
2015-11-25 16:38:38.986 [ INFO] mpegts: 3680H in TV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-11-25 16:38:39.489 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument Invalid]

Make sure you're entering most (if not all) values correctly, avoid using AUTO.

RE: TVheadEnd Ubuntu 14.04LTS HTS Tvheadend 4.1-1047~g851aebb + TBS6920 DVB-S2 card problems - Added by Info Barra almost 9 years ago

Yup i am pretty sure

my enigma2 box can scan the channels fine, i even removed the switch and placed C band cable directly to Tunner but still giving failed scan.

weird anymore ideas?

RE: TVheadEnd Ubuntu 14.04LTS HTS Tvheadend 4.1-1047~g851aebb + TBS8920 DVB-S2 card problems - Added by Info Barra almost 9 years ago

Hi guys

i am confused on something here

2015-12-14 11:39:56.178 [ INFO] epgdb: config 1
2015-12-14 11:39:56.178 [ INFO] epgdb: channels 0
2015-12-14 11:39:56.178 [ INFO] epgdb: brands 0
2015-12-14 11:39:56.178 [ INFO] epgdb: seasons 0
2015-12-14 11:39:56.178 [ INFO] epgdb: episodes 0
2015-12-14 11:39:56.178 [ INFO] epgdb: broadcasts 0
2015-12-14 11:39:56.178 [ NOTICE] START: HTS Tvheadend version 4.1-1047~g851aebb started, running as PID:1668 UID:0 GID:0, CWD:/root CNF:/root/.hts/tvheadend
2015-12-14 11:39:59.000 [ INFO] mpegts: 10905H in InfoBarraIPTV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-12-14 11:39:59.080 [ INFO] subscription: 0002: "scan" subscribing to mux "10905H", weight: 5, adapter: "Conexant CX24116/CX24118 : DVB-S #0", network: "InfoBarraIPTV", service: "Raw PID Subscription"
2015-12-14 11:40:09.000 [ INFO] mpegts: 10905H in InfoBarraIPTV - scan no data, failed
2015-12-14 11:40:09.000 [ INFO] subscription: 0002: "scan" unsubscribing
2015-12-14 11:40:09.000 [ INFO] mpegts: 1122H in InfoBarraIPTV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-12-14 11:40:09.000 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument invalid]

root@tvheadend:~# dmesg | grep DVB
[ 4.168450] cx880: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72,autodetected], frontend(s): 1
[ 4.694736] input: cx88 IR (TBS 8920 DVB-S/S2) as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/rc/rc0/input5
[ 4.694963] rc0: cx88 IR (TBS 8920 DVB-S/S2) as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/rc/rc0
[ 4.708565] cx880/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72]
[ 4.708566] cx880/2: cx2388x based DVB/ATSC card
[ 4.711101] DVB: registering new adapter (cx880)
[ 4.711104] DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
[ 378.682448] DVB: adapter 0 frontend 0 frequency 8628000 out of range (950000..2150000)
root@tvheadend:~#

TBS8920 = Frontend : 1

DVB registering frontend 0 = CX24116/cx241118 ???

Does it means its setting the wrong model tunner in the TVheadend ???

i am confused on this one can anyone share some lights on how it got the DVB-S2 tunner configured?

RE: TVheadEnd Ubuntu 14.04LTS HTS Tvheadend 4.1-1047~g851aebb + TBS8920 DVB-S2 card problems - Added by Mark Clarkstone almost 9 years ago

Info Barra wrote:

Hi guys

i am confused on something here

2015-12-14 11:39:56.178 [ INFO] epgdb: config 1
2015-12-14 11:39:56.178 [ INFO] epgdb: channels 0
2015-12-14 11:39:56.178 [ INFO] epgdb: brands 0
2015-12-14 11:39:56.178 [ INFO] epgdb: seasons 0
2015-12-14 11:39:56.178 [ INFO] epgdb: episodes 0
2015-12-14 11:39:56.178 [ INFO] epgdb: broadcasts 0
2015-12-14 11:39:56.178 [ NOTICE] START: HTS Tvheadend version 4.1-1047~g851aebb started, running as PID:1668 UID:0 GID:0, CWD:/root CNF:/root/.hts/tvheadend
2015-12-14 11:39:59.000 [ INFO] mpegts: 10905H in InfoBarraIPTV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-12-14 11:39:59.080 [ INFO] subscription: 0002: "scan" subscribing to mux "10905H", weight: 5, adapter: "Conexant CX24116/CX24118 : DVB-S #0", network: "InfoBarraIPTV", service: "Raw PID Subscription"
2015-12-14 11:40:09.000 [ INFO] mpegts: 10905H in InfoBarraIPTV - scan no data, failed
2015-12-14 11:40:09.000 [ INFO] subscription: 0002: "scan" unsubscribing
2015-12-14 11:40:09.000 [ INFO] mpegts: 1122H in InfoBarraIPTV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-12-14 11:40:09.000 [ ERROR] linuxdvb: Conexant CX24116/CX24118 : DVB-S #0 - failed to tune [e=Argument invalid]

root@tvheadend:~# dmesg | grep DVB
[ 4.168450] cx880: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72,autodetected], frontend(s): 1
[ 4.694736] input: cx88 IR (TBS 8920 DVB-S/S2) as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/rc/rc0/input5
[ 4.694963] rc0: cx88 IR (TBS 8920 DVB-S/S2) as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/rc/rc0
[ 4.708565] cx880/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72]
[ 4.708566] cx880/2: cx2388x based DVB/ATSC card
[ 4.711101] DVB: registering new adapter (cx880)
[ 4.711104] DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
[ 378.682448] DVB: adapter 0 frontend 0 frequency 8628000 out of range (950000..2150000)
root@tvheadend:~#

TBS8920 = Frontend : 1

DVB registering frontend 0 = CX24116/cx241118 ???

Does it means its setting the wrong model tunner in the TVheadend ???

i am confused on this one can anyone share some lights on how it got the DVB-S2 tunner configured?

Most tuner drivers use the chipset names not the name of the tuner.

It looks to be the right names for the chipset.

Remember if you're using a pre-defined mux list some will fail (as they are really out of date), if it still fails even after entering your own mux try something like w_scan. if that finds services and results in a signal ok message it means you're not entering enough details into Tvheadend.

If you can, post a screenshot here of the mux you're trying to scan.

RE: TVheadEnd Ubuntu 14.04LTS HTS Tvheadend 4.1-1047~g851aebb + TBS8920 DVB-S2 card problems - Added by Info Barra almost 9 years ago

Hi

yes i have deleted them all and have done it manually inserted all the data updated.

1st i scanned the TPs with my Linux STB

2nd i copied all the Transponder data and i have added exactly the same way to the TVheadend configuration.

then i press scan and it fails no channel found at all.

thats the strange part of it cannot find any channel at all, aldo the sat signal is ok, cause i plug my stb and it finds the channel

PS- What do you mean with "w_scan" ????? i am Lost

RE: TVheadEnd Ubuntu 14.04LTS HTS Tvheadend 4.1-1047~g851aebb + TBS8920 DVB-S2 card problems - Added by Info Barra almost 9 years ago

ok attached some pics

btw the channel i am scanning on DVBS2 is HD chnanel beeing broadcasted on 8PSK

its beeing broadcasted on C band but as we know "or most should know" on the Linux STBs we scan them using Universal LNB aldo the frequency on Universal is 9750 and C band uses 5150 we apply the maths

example channel frequency C band MHZ original = 3860 So we allways calculate it 5150 - 3680 = 1470mhz

then we add this 1470 to 9750 = 11220 mhz frequency on stb with Universal LNB type setup. the symbol rate its allways the same from the original

this works 100% on the linux STB and any other non linux stb as long as we use universal lnb type.

So this channel frequency works well on all my linux STB and non linux i can get the signal lock to channel

aldo it fails , even an SD channel on frequency 10905 its also failing with TVheadend.

BTW this is the output log on the terminal

any other ideas?

2015-12-14 16:03:00.193 [ NOTICE] START: HTS Tvheadend version 4.1-1047~g851aebb started, running as PID:2150 UID:0 GID:0, CWD:/root CNF:/root/.hts/tvheadend
2015-12-14 16:03:09.000 [ INFO] mpegts: 10905H in InfoBarraIPTV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-12-14 16:03:09.080 [ INFO] subscription: 0002: "scan" subscribing to mux "10905H", weight: 5, adapter: "Conexant CX24116/CX24118 : DVB-S #0", network: "InfoBarraIPTV", service: "Raw PID Subscription"
2015-12-14 16:03:19.000 [ INFO] mpegts: 10905H in InfoBarraIPTV - scan no data, failed
2015-12-14 16:03:19.000 [ INFO] subscription: 0002: "scan" unsubscribing
2015-12-14 16:03:19.000 [ INFO] mpegts: 11220H in InfoBarraIPTV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-12-14 16:03:19.000 [ INFO] opentv-ausat: registering mux 11220H in InfoBarraIPTV
2015-12-14 16:03:19.002 [ INFO] subscription: 0004: "scan" subscribing to mux "11220H", weight: 5, adapter: "Conexant CX24116/CX24118 : DVB-S #0", network: "InfoBarraIPTV", service: "Raw PID Subscription"
2015-12-14 16:03:29.000 [ INFO] mpegts: 11220H in InfoBarraIPTV - scan no data, failed
2015-12-14 16:03:29.000 [ INFO] subscription: 0004: "scan" unsubscribing

DVB Adapter.jpg (84 KB) DVB Adapter.jpg
DVB input screenshot.jpg (140 KB) DVB input screenshot.jpg
Mux Information.jpg (116 KB) Mux Information.jpg
Muxes.jpg (88.4 KB) Muxes.jpg
TV Adapters.jpg (132 KB) TV Adapters.jpg
Network Config.jpg (138 KB) Network Config.jpg

RE: TVheadEnd Ubuntu 14.04LTS HTS Tvheadend 4.1-1047~g851aebb + TBS8920 DVB-S2 card problems - Added by Mark Clarkstone almost 9 years ago

Info Barra wrote:

ok attached some pics

btw the channel i am scanning on DVBS2 is HD chnanel beeing broadcasted on 8PSK

its beeing broadcasted on C band but as we know "or most should know" on the Linux STBs we scan them using Universal LNB aldo the frequency on Universal is 9750 and C band uses 5150 we apply the maths

example channel frequency C band MHZ original = 3860 So we allways calculate it 5150 - 3680 = 1470mhz

then we add this 1470 to 9750 = 11220 mhz frequency on stb with Universal LNB type setup. the symbol rate its allways the same from the original

this works 100% on the linux STB and any other non linux stb as long as we use universal lnb type.

So this channel frequency works well on all my linux STB and non linux i can get the signal lock to channel

aldo it fails , even an SD channel on frequency 10905 its also failing with TVheadend.

BTW this is the output log on the terminal

any other ideas?

2015-12-14 16:03:00.193 [ NOTICE] START: HTS Tvheadend version 4.1-1047~g851aebb started, running as PID:2150 UID:0 GID:0, CWD:/root CNF:/root/.hts/tvheadend
2015-12-14 16:03:09.000 [ INFO] mpegts: 10905H in InfoBarraIPTV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-12-14 16:03:09.080 [ INFO] subscription: 0002: "scan" subscribing to mux "10905H", weight: 5, adapter: "Conexant CX24116/CX24118 : DVB-S #0", network: "InfoBarraIPTV", service: "Raw PID Subscription"
2015-12-14 16:03:19.000 [ INFO] mpegts: 10905H in InfoBarraIPTV - scan no data, failed
2015-12-14 16:03:19.000 [ INFO] subscription: 0002: "scan" unsubscribing
2015-12-14 16:03:19.000 [ INFO] mpegts: 11220H in InfoBarraIPTV - tuning on Conexant CX24116/CX24118 : DVB-S #0
2015-12-14 16:03:19.000 [ INFO] opentv-ausat: registering mux 11220H in InfoBarraIPTV
2015-12-14 16:03:19.002 [ INFO] subscription: 0004: "scan" subscribing to mux "11220H", weight: 5, adapter: "Conexant CX24116/CX24118 : DVB-S #0", network: "InfoBarraIPTV", service: "Raw PID Subscription"
2015-12-14 16:03:29.000 [ INFO] mpegts: 11220H in InfoBarraIPTV - scan no data, failed
2015-12-14 16:03:29.000 [ INFO] subscription: 0004: "scan" unsubscribing

Looks like you're missing an extra zero off the symbol rate shown in that image and an additional zero off the second frequency in the Muxes image.

RE: TVheadEnd Ubuntu 14.04LTS HTS Tvheadend 4.1-1047~g851aebb + TBS8920 DVB-S2 card problems - Added by Info Barra almost 9 years ago

Hi

well the image was wrong was old image the updated kept giving the same result..

funny enough, i shutdown the ubuntu-server and removed the PCI slot and placed it back up again.

And did a new scan on the edited transponders and now it picked the channels up.

Now i am stuck on the users permissions and transcode + streaming to mp4 format so i can share tv channel to Plex IPTV module.

i can watch the channel directly with VLC from the services window on tvheadend.

But on th channels/epg window when i press play it does not allow me to play the stream

    (1-10/10)