Tvheadend

Ahmed Nabil wrote:

Hello,

I'm terribly confused i'm all new to these matters, i want to be able to watch different channels on different mux at the same time, i want to watch 3000 TV channels at the same time.
so from what I've read and understood, i need 1 tuner/1 mux, and only then all channels on the same mux can be viewed simultaneously.

what else other than a tuner/mux? if I've got 39 mux, i need 39 DVB-S2 tuners in my server??

can i use this ?? http://img.dxcdn.com/productimages/sku_184986_2.jpg and connect 4 cables to a 4 port LNB, then to a single port DVB-S2 tuner?
then i would be able to watch all the channels in the 4 mux simultaneously??

or what...i need guidance...

Thank you all very much

You can use a spliter but that would mean the all tuners connected to it must tune to a transponder/mux that exists within the same band/polarization (HIGH/LOW + VERTICAL/HORIZONTAL).

You could use a Multiswitch, Unfortunately I know very little about them.

And finally a SAT>IP server might be another option, but that can only receive up to four transponders/muxes at a time meaning you'd need loads of them!

Either way for what you want, it's going to cost.

This from digitaldevices might be useful to you as well..

HTH