Tvheadend

You're running quite an old version of Tvheadend, you may want to give 4.x a try. Errors on Tvheadend usually mean a bad signal or the machine is struggling to process the data & is dropping packets (highly unlikely and mainly affects USB devices not pci).

Have you tried another receiver using the same connection?

Thanks i'l give a try to tvheadend 4.x, i have to instal ubuntu 14.04 64 bits, compile drivers, and test everything.
I will post the result here.

In newer linux no need to compile module
it run without problem /have same card/

Just install FEMON to watch is there a BER errors

Hello Saen Acro,

Can you post your system configuration?

Linux flavor, system

I cant put my Skystar S2 to work.

Most simple solution is with OpenElec

ubuntu 15.04 x64 /someone say x32 is only for make-it-alone-at-home aka no deb for it/

my card is on Asus pundit
http://www.asus.com/Barebone_PCs/Pundit/specifications/
with
http://ark.intel.com/products/27129/Intel-Celeron-D-Processor-352-512K-Cache-3_20-GHz-533-MHz-FSB
only 32bit
ubuntu 15.04
if problems
https://bitbucket.org/CrazyCat/linux-tbs-drivers/
before compilation

sudo rm -rf /lib/modules/`uname -r`/kernel/drivers/media/*

ok thanks
i'll give a try with ubuntu 15.04 64bits

Hello Saen Acro

I install Ubuntu 15.04 64bits, and now detects the Skystar S2
i have to download from linuxtv.org the drivers, compile them, put the firmware for the board on /lib/firmware, and my system now detects the board, but i have the same problem on the other machine, backend errors, the signal strenght is up tp 86% snr 15db, i dont now what to do.

Dont belive on this values
Find stb and see some real values
If you have amplifiier there also cant be problem

I have a stb installed on that, the values are the same and the stb works great, On you post you say

"In newer linux no need to compile module
it run without problem /have same card/

Just install FEMON to watch is there a BER errors"

I install ubuntu 15.04 64bits the system does not detects the card, i compile the drives that i downloaded from linuxtv.org, and now the system detects the card. On windows works like a charm. My card photo is in atachment.

I have another try with mythubuntu, to see is works.

Thanks for the help Saen Acro

my card is different