Project

General

Profile

Forums » General »

map dvb services to channel grayed out

Added by Kevin Aspirator almost 10 years ago

Hi,

i tried to use my wandboard quad as dvb-t server with a Realtek RTL2838 and ARCH Linux. I was able to create a channels.conf with w_scan, so stick seems to be working. So why can't i map the channels ?

tvheadenback.png (62.5 KB) tvheadenback.png

Replies (4)

RE: map dvb services to channel grayed out - Added by Prof Yaffle almost 10 years ago

tvheadend doesn't use channels.conf. You need to add the muxes and scan them for service, and then map those service to channels.

RE: map dvb services to channel grayed out - Added by Kevin Aspirator almost 10 years ago

nothing works, no internal list or the w_scan created list

RE: map dvb services to channel grayed out - Added by Kevin Aspirator almost 10 years ago

and i don't know what i should enter in a manual mux

RE: map dvb services to channel grayed out - Added by Prof Yaffle almost 10 years ago

"Add DVB Network by location" is a good place to start. If the data there is out of date (it may be) then you need to Google your location and transmitter, or copy the settings from a TV that's already configured. It's normally sufficient to state the frequency and bandwidth with everything else set to Auto.

Again, tvheadend doesn't use any channel list created by w_scan, so that's not a surprise if it doesn't work. If w_scan can detect your muxes, you could use that as input to the above step; if w_scan can't detect anything, then you have a tuner problem.

    (1-4/4)