DVB-T: , "initial scan no data"
Added by isabido isabido about 10 years ago
I test last version git HTS Tvheadend 3.9.1573~gba136c5
My DBV-T zone is Europe/spain.
Signal is Ok, hardware, firmware is also ok since Tvheadend 3.4 works fine and found all channels.
I compiled to ARCH LINUX armv6 raspberry pi.
2014-09-28 10:58:26.012 [ INFO]:subscription: 'epggrab' subscribing to mux, weight: 3, adapter: 'Afatech AF9013 : DVB-T #0', network: 'TDT', mux: '205.5', hostname: '<N/A>', username: '<N/A>', client: '<N/A>'
2014-09-28 10:58:51.001 [ INFO]:subscription: "epggrab" unsubscribing
2014-09-28 10:59:02.000 [ INFO]:mpegts: 212.5 in TDT - tuning on Afatech AF9013 : DVB-T #0
2014-09-28 10:59:02.011 [ INFO]:subscription: 'epggrab' subscribing to mux, weight: 3, adapter: 'Afatech AF9013 : DVB-T #0', network: 'TDT', mux: '212.5', hostname: '<N/A>', username: '<N/A>', client: '<N/A>'
2014-09-28 10:59:27.001 [ INFO]:subscription: "epggrab" unsubscribing
2014-09-28 10:59:38.000 [ INFO]:mpegts: 219.5 in TDT - tuning on Afatech AF9013 : DVB-T #0
2014-09-28 10:59:38.007 [ INFO]:subscription: 'epggrab' subscribing to mux, weight: 3, adapter: 'Afatech AF9013 : DVB-T #0', network: 'TDT', mux: '219.5', hostname: '<N/A>', username: '<N/A>', client: '<N/A>'
Thanks in advanced!
Replies (8)
RE: DVB-T: , "initial scan no data" - Added by isabido isabido about 10 years ago
More log info:
2014-09-28 11:48:23.001 [ INFO] mpegts: 698 in TDT - scan no data, failed
2014-09-28 11:48:23.007 [ INFO] subscription: "scan" unsubscribing
2014-09-28 11:48:23.255 [ INFO] mpegts: 570 in TDT - tuning on Afatech AF9013 : DVB-T #0
2014-09-28 11:48:23.262 [ INFO] opentv-skyuk: registering mux 570 in TDT
2014-09-28 11:48:23.641 [ INFO] subscription: 'scan' subscribing to mux, weight: 4, adapter: 'Afatech AF9013 : DVB-T #0', network: 'TDT', mux: '570', hostname: '<N/A>
RE: DVB-T: , "initial scan no data" - Added by isabido isabido about 10 years ago
I send a complete log, thanks
RE: DVB-T: , "initial scan no data" - Added by vinc vinc about 10 years ago
hi there,
i'm on manjaro and i noticed that when u add a pre-defined mux it set all bandwith no NONE (maybe this a bug)...i've just set the right bandwith for all muxes and now it scans all channels.
i'm using last master build from source on git
RE: DVB-T: , "initial scan no data" - Added by isabido isabido about 10 years ago
Thanks thanks thanks
That was the problem! In Spain you have to put 8MHZ bandwith!
It is a bug of default MUX on last git
RE: DVB-T: , "initial scan no data" - Added by vinc vinc about 10 years ago
i've added the bug to the requests
now the bug is fixed in the last build!
(commit 8f7e6e565e5f75074f715bf7c5387d25811b8c3c)
bye
RE: DVB-T: , "initial scan no data" - Added by Martin Keller almost 10 years ago
Hi,
I've been having same issues in Czech republic. Bandwidth is set but still I'am getting "scan no data, failed". I came from 3.2 to latest git version.
Log attached.
RE: DVB-T: , "initial scan no data" - Added by Gary Brown almost 10 years ago
Martin Keller wrote:
Hi,
I've been having same issues in Czech republic. Bandwidth is set but still I'am getting "scan no data, failed". I came from 3.2 to latest git version.
Log attached.
can you answer these?
what version TVheadend are you using? are you using master or any since commit mentioned above (approx 3 months ago)
Whats your tuner card/usb?
can you check in other software if you can tune?
Does the channels tune ok if you plug your arial into your tv?
do you have a site to get the muxes from to check they are correct?
can you get the info from your tv if no to above question?
RE: DVB-T: , "initial scan no data" - Added by Martin Keller almost 10 years ago
1. Using latest version - downloaded today from Github.
2. Pinnacle NanoStick 73e - works fine on PC + works fine on TVheadend 3.2
3. Yes, muxes are correct - can compare them to specs on web.
TVheadend is running on Netgear ReadyNas Duo v2, firmware for stick is latest Dibcomm 7000PC (not sure if I spelled it correctly).