Project

General

Profile

Forums » General »

Massive problems with TVHeadend on BananaPI

Added by Daniel McCarthy about 10 years ago

Hey guys,
I've successfully built the newest version and fired it up.
I just started it via 'tvheadend'. My adapter TeVii S660 shows up and I'm able to configure it.
Then I add a Network for Astra 19.2 and select it as the network in my configuration.
Since then, nothing. And yes, I've enabled the adapter. Am I missing something?
What got my attention was that there aren't any MUXES in the network-tab.
Is this a normal situation?
Thanks in advance.
McCarthy


Replies (3)

RE: Massive problems with TVHeadend on BananaPI - Added by Prof Yaffle about 10 years ago

Did you select a list of pre-defined muxes when you added the network? If you didn't, you'll probably need to find one or more for your satellite and add them... autodiscovery should complete the list, so you don't need to add them all.

19.2E is in the pre-defined list, though.

RE: Massive problems with TVHeadend on BananaPI - Added by Daniel McCarthy about 10 years ago

Hey guys,
I've solved the problem. I followed this guide (http://www.xbmcnerds.com/index.php?page=Thread&threadID=18166) and it worked like a charm ;).
Now I'm using Raspbian with TVHeadend on the BananaPI with success.
Cheers.

    (1-3/3)