Tvheadend

Ok, I finally got my HVR-1950's to work! First, I downloaded the firmware files [http://www.isely.net/pvrusb2/setup.html#Firmware] to '/usr/syno/hotplug/firmware' on my DS213. Then I downloaded ‘gcc421_glibc25_88f6281-GPL.tgz’ and ‘synogpl-2636-6281.tbz’ [http://sourceforge.net/projects/dsgpl/files]. Then I followed these instructions [http://hallard.me/how-to-install-kernel-modules-on-synology-ds1010-dsm-4-1] and was able to do a ‘make menuconfig’. I went to “Device Drivers” and selected “Multimedia Support”. I then selected “Video For Linux” and chose "Customize analog and hybrid tuner modules to build". I made sure that everything was selected in that section and exited back to the previous section. Then I chose “Video Capture Adapters” and selected “Conexant cx23416/cx23415 MPEG encoder/decoder support”. I then selected “V4L USB devices” and chose “USB Video Class (UVC)”, “Hauppage WinTV-PVR USB2 support”, and "Conexant cx231xx USB video capture support". After exiting the menu and saving the configuration, I did a ‘make modules’ which successfully finished and built all of the KO files. I then copied all of the KO files under the ‘media’ folder (except for the i2c files which were located in the 'i2c' folder under drivers) and subfolders over to the ‘/opt/lib/modules/2.6.32′ folder on my DS213. I did a ‘mknod /dev/video0 c 81 0′ and a ‘mknod /dev/video1 c 81 1′ and then an ‘insmod’ for the following files in this order:

insmod i2c-core.ko
insmod i2c-algo-bit.ko
insmod tuner-xc2028.ko
insmod tuner-types.ko
insmod tuner-simple.ko
insmod mt20xx.ko
insmod tea5767.ko
insmod tea5761.ko
insmod tda9887.ko
insmod tda827x.ko
insmod tda18271.ko
insmod tda8290.ko
insmod xc5000.ko
insmod mt2060.ko
insmod mt2266.ko
insmod qt1010.ko
insmod mt2131.ko
insmod mxl5005s.ko
insmod mxl5007t.ko
insmod mc44s803.ko
insmod ir-common.ko
insmod v4l1-compat.ko
insmod videodev.ko
insmod v4l2-int-device.ko
insmod v4l2-common.ko
insmod tuner.ko
insmod saa7115.ko
insmod saa717x.ko
insmod saa7127.ko
insmod msp3400.ko
insmod cs53l32a.ko
insmod m52790.ko
insmod wm8775.ko
insmod wm8739.ko
insmod vp27smpx.ko
insmod cx25840.ko
insmod upd64031a.ko
insmod upd64083.ko
insmod tveeprom.ko
insmod videobuf-core.ko
insmod videobuf-vmalloc.ko
insmod cx231xx.ko
insmod cx2341x.ko
insmod pvrusb2.ko
insmod ivtv.ko
insmod uvcvideo.ko
insmod ir-kbd-i2c.ko

After that, my tuners were working!

hi,

How do i set up in synology dsm 5.0 ds 713+ .Is the analog tuner is working and can be record the channels on analog?

hope for your response.

Thanks,

Sorry! I was never able to get dsm 5.0 working with the analog tuners and now that my cable company switched to digital only, I no longer have a use for them anyway...

its okay thanks for the info, but are you be able to record an analog channel on your synology using HVR-1950?

Yes, with an older dsm. I couldn't get dsm 5.0 to work. I am sure that I would have eventually figured it out, but there's no point for me now...