Newbie needs help. No scans, no channels. What is wrong?
Newbie needs help. No scans, no channels. What is wrong?Replies (5)
RE: Newbie needs help. No scans, no channels. What is wrong?
-
Added by Jonas Lang over 1 year ago
In Networks Section what are your settings. Did you restart TVH after you configured the Mux.
RE: Newbie needs help. No scans, no channels. What is wrong?
-
Added by Müfit Eribol over 1 year ago
Thank you for your support.
Restarted TVH, but it is still IDLE and FAIL.
Could it be 0 entry in Frequency and Symbol rate in Mux?
RE: Newbie needs help. No scans, no channels. What is wrong?
-
Added by Jonas Lang over 1 year ago
There’s nothing for the scan to scan so it returns nothing. If you don’t have a frequency for TVH to scan you’ll probably need go the Sat IP or even IPTV.
Have you been able to play the content of your broadcast through VLC or something similar. Possibly find out what distribution system is used to relay your broadcast through and take it from there.
With the broadcast cable is connected up to your TBS card is TVH reporting any sort of tuner connected. Are you connected to the internet.
RE: Newbie needs help. No scans, no channels. What is wrong?
-
Added by Ukn Unknown over 1 year ago
you can use a different tool to scan:
https://www.linuxtv.org/wiki/index.php/W_scan
install:
sudo apt update
sudo apt install w-scan
Make sure you turn off tvh first:
sudo systemctl stop tvheadend
After that scan using w_scan (I use for DVB-C):
w_scan -X -f c -c <YOUR_COUNTRY_TWO_LETTER_CODE> -Q 0 -S 0 -F
replace <YOUR_COUNTRY_TWO_LETTER_CODE> with US, CA, .... two letters for your country.
Will take 20 min+ to scan all frequencies ... in the end you will get a nice report with all channels found, freq. and settings.