Project

General

Profile

Astrometa DVB-C scan no data, failed on ubuntu but work fine on libreelec

Added by ricain silva over 3 years ago

Hi,

I have bought this adapter and on ubuntu 20.4 give me error scan no data, but on libreelec works fine.

I have put the firmware on /lib/firmware/dvb-demod-mn88473-01.fw and i have do media_build (it's necessarily build media?)

After many experience i don't succesfully put work on this dvb-c works on ubuntu :(

I have view the log on connect usb:

Feb 14 21:48:25 ubu kernel: [  686.382038] usb 1-2: new full-speed USB device number 4 using ohci-pci
Feb 14 21:48:25 ubu kernel: [  686.698642] usb 1-2: config 1 interface 0 altsetting 0 endpoint 0x81 has invalid maxpacket 512, setting to 64
Feb 14 21:48:25 ubu kernel: [  686.719985] usb 1-2: New USB device found, idVendor=15f4, idProduct=0131, bcdDevice= 1.00
Feb 14 21:48:25 ubu kernel: [  686.719997] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb 14 21:48:25 ubu kernel: [  686.720006] usb 1-2: Product: dvbt2
Feb 14 21:48:25 ubu kernel: [  686.720015] usb 1-2: Manufacturer: astrometadvbt2
Feb 14 21:48:25 ubu kernel: [  686.748304] usb 1-2: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state
Feb 14 21:48:26 ubu kernel: [  687.206018] usb 1-2: dvb_usb_v2: will use the device's hardware PID filter (table count: 32)
Feb 14 21:48:26 ubu kernel: [  687.206038] dvbdev: DVB: registering new adapter (Astrometa DVB-T2)
Feb 14 21:48:26 ubu kernel: [  687.206053] usb 1-2: media controller created
Feb 14 21:48:26 ubu kernel: [  687.206796] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
Feb 14 21:48:26 ubu kernel: [  687.220724] i2c i2c-1: Added multiplexed i2c bus 2
Feb 14 21:48:26 ubu kernel: [  687.220736] rtl2832 1-0010: Realtek RTL2832 successfully attached
Feb 14 21:48:26 ubu kernel: [  687.221357] i2c i2c-1: cxd2841er_attach(): I2C adapter 00000000bf689cb7 SLVX addr 6e SLVT addr 6c
Feb 14 21:48:26 ubu kernel: [  687.238729] i2c i2c-1: cxd2841er_attach(): attaching CXD2837ER DVB-C/T/T2 frontend
Feb 14 21:48:26 ubu kernel: [  687.238735] i2c i2c-1: cxd2841er_attach(): chip ID 0xb1 OK.
Feb 14 21:48:26 ubu kernel: [  687.238743] usb 1-2: DVB: registering adapter 5 frontend 0 (Realtek RTL2832 (DVB-T))...
Feb 14 21:48:26 ubu kernel: [  687.238752] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered.
Feb 14 21:48:26 ubu kernel: [  687.239054] usb 1-2: DVB: registering adapter 5 frontend 1 (Sony CXD2837ER DVB-T/T2/C demodulator)...
Feb 14 21:48:26 ubu kernel: [  687.239061] dvbdev: dvb_create_media_entity: media entity 'Sony CXD2837ER DVB-T/T2/C demodulator' registered.
Feb 14 21:48:26 ubu kernel: [  687.239337] r820t 2-003a: creating new instance
Feb 14 21:48:26 ubu kernel: [  687.264228] r820t 2-003a: Rafael Micro r820t successfully identified
Feb 14 21:48:26 ubu kernel: [  687.264243] r820t 2-003a: attaching existing instance
Feb 14 21:48:26 ubu kernel: [  687.387353] r820t 2-003a: Rafael Micro r820t successfully identified
Feb 14 21:48:26 ubu kernel: [  687.409912] rtl2832_sdr rtl2832_sdr.1.auto: Registered as swradio0
Feb 14 21:48:26 ubu kernel: [  687.409917] rtl2832_sdr rtl2832_sdr.1.auto: Realtek RTL2832 SDR attached
Feb 14 21:48:26 ubu kernel: [  687.409921] rtl2832_sdr rtl2832_sdr.1.auto: SDR API is still slightly experimental and functionality changes may follow
Feb 14 21:48:26 ubu kernel: [  687.438324] Registered IR keymap rc-astrometa-t2hybrid
Feb 14 21:48:26 ubu kernel: [  687.438586] rc rc0: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:06.0/usb1/1-2/rc/rc0
Feb 14 21:48:26 ubu kernel: [  687.438812] rc rc0: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 0, raw IR receiver, no transmitter
Feb 14 21:48:26 ubu kernel: [  687.439129] input: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:06.0/usb1/1-2/rc/rc0/input9
Feb 14 21:48:26 ubu kernel: [  687.439526] usb 1-2: dvb_usb_v2: schedule remote query interval to 200 msecs
Feb 14 21:48:26 ubu kernel: [  687.474000] usb 1-2: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected
Feb 14 21:48:26 ubu systemd-udevd[1331]: dvb5.frontend0: Failed to process device, ignoring: File exists

But on the syslog i never view load firmware, it's normal?

Can you help me
Thank you for help.


Replies (3)

RE: Astrometa DVB-C scan no data, failed on ubuntu but work fine on libreelec - Added by saen acro over 3 years ago

I'll will not recomend any USB because of contruction and size,
they overheat also some boards have problems with USB.

    (1-3/3)