Forums » Tutorial and setups »
Failed to scan chanels tvheadend DVB-C T230C2 MyGica
Added by Klein Johns over 4 years ago
Hi all,
I bought two T230C DVB-C MyGica adapters and I can't make it work.
I was trying 2 different OS ( Coreelec and Libreelec).
Tvheadend recognizes the adapter on both when I'm using crazycat driver, everything looks ok.
when I'm trying to scan I'm getting: failed.
TVHEADEND:
2020-08-11 22:06:57.308 mpegts: 201MHz in Brazilian DVBC - tuning on Silicon Labs Si2168 0 : DVB-C 0
2020-08-11 22:06:57.308 subscription: 000B: scan subscribing to mux 201MHz, weght: 6, adapter: Silicon Labs Si2168 0 : DVB-C 0, network: Brazilian DVBC, service: Raw PID Subscription
2020-08-11 22:07:01.318 linuxdvb: Unhandled ERROR_BLOCK_COUNT scale: 0
2020-08-11 22:07:02.308 mpegts: 201MHz in Brazilian DVBC - scan no data, failed
2020-08-11 22:07:02.308 subscription: 000B: scan unsubscribing
2020-08-11 22:07:02.308 mpegts: 183MHz in Brazilian DVBC - tuning on Silicon Labs Si2168 0 : DVB-C 0
2020-08-11 22:07:02.308 subscription: 000D: scan subscribing to mux 183MHz, weght: 6, adapter: Silicon Labs Si2168 0 : DVB-C 0, network: Brazilian DVBC, service: Raw PID Subscription
2020-08-11 22:07:07.308 mpegts: 183MHz in Brazilian DVBC - scan no data, failed
2020-08-11 22:07:07.308 subscription: 000D: scan unsubscribing
Resume dmesg
dvb-usb: found a ' Mygica T230C2 DVB-T/T2/C ' in warm state.
si2168 5-0064 : downloading firmware from file ' dvb-demod-si2168-d60-01.fw '
si2157 6-0060 : downloading firmware from file ' dvb-tuner-si2141-a10-01.fw '
usb 1-2: New USB device found, idVendor= 0572 , idProduct= c68a
COREELEC OS
CoreELEC
https://coreelec.org
CoreELEC (official): 9.2.4 (Amlogic.arm)
CoreELEC:~ dmesg | grep dvb
[ 8.211184@4] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.crazycat_aml.nf
[ 8.280473@4] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.crazycat_aml/lib/modes/3.14.29
[ 14.229312@4] dvb_meson dvb.52: Found i2c-2 adapter: aml_i2c_adap2
[ 14.229330@4] dvb_meson dvb.52: ts0: parallel
[ 14.229443@4] dvb_meson dvb.52: ts0_control: 0x0
[ 14.229472@4] dvb_meson dvb.52: GPIO fec_reset0: 217
[ 14.229484@4] dvb_meson dvb.52: GPIO power_ctrl0: 215
[ 14.229517@4] dvb_meson dvb.52: dev_name=dvb
[ 14.291418@0] dvb-usb: found a 'Mygica T230C2 DVB-T/T2/C' in warm state.
[ 14.540487@6] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 15.005716@6] dvbdev: DVB: registering new adapter (Mygica T230C2 DVB-T/T2/C)
[ 15.007153@6] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 15.027644@7] dvbdev: dvb_create_media_entity: media entity 'Silicon Labs Si2168' registered.
[ 15.060980@4] rc rc0: lirc_dev: driver dvb_usb_cxusb registered at minor = 0, scancode receiver, no transmitter
[ 15.060993@4] dvb-usb: schedule remote query interval to 100 msecs.
[ 15.061074@4] dvb-usb: Mygica T230C2 DVB-T/T2/C successfully initialized and connected.
[ 15.061246@4] usbcore: registered new interface driver dvb_usb_cxusb
[ 15.440017@4] dvb_meson dvb.52: DVB demod detection for i2c-2 (aml_i2c_adap2)...dvb
[ 15.850188@7] si2168 5-0064: downloading firmware from file 'dvb-demod-si2168-d60-01.fw'
[ 16.669968@5] dvb_meson dvb.52: Checking for Availink AVL6862 DVB-S2/T2/C demod ...
[ 17.025092@5] si2157 6-0060: downloading firmware from file 'dvb-tuner-si2141-a10-01.fw'
[ 17.090733@5] i2c i2c-2: dvb_meson: found AVL6862 family_id=0x68624955
[ 19.004563@5] i2c i2c-2: dvb_meson: Rafael R912 successfully attached!
[ 19.004581@5] dvb_meson dvb.52: Total DVB modules found: 1
[ 19.006684@5] dvbdev: DVB: registering new adapter (dvb_meson)
[ 19.015076@6] dvb_meson dvb.52: DVB: registering adapter 1 frontend 0 (Availink avl6862)...
[ 23.591909@7] dvb_meson dvb.52: DVB: adapter 1 frontend 0 frequency 0 out of range (47000000..2150000000)
CoreELEC:~ dmesg | grep dvb-demod
[ 15.850188@7] si2168 5-0064: downloading firmware from file 'dvb-demod-si2168-d60-01.fw'
CoreELEC:~ dmesg | grep dvb-tune
[ 17.025092@5] si2157 6-0060: downloading firmware from file 'dvb-tuner-si2141-a10-01.fw'
CoreELEC:~ ^C
CoreELEC:~ dmesg | grep -i c68a
[ 6.720460@7] usb 1-2: New USB device found, idVendor=0572, idProduct=c68a
LIBREELEC OS X86 (Intel i5)
LibreELEC
https://libreelec.tv
LibreELEC (official): 9.2.3 (Generic.x86_64)
:~ dmesg | grep dvb
[ 1.974869] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.crazycat.conf
[ 1.987127] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.crazycat/lib/modules/5.1 .16
[ 3.225815] dvb-usb: found a 'Mygica T230C2 DVB-T/T2/C' in warm state.
[ 3.469806] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 3.470254] dvbdev: DVB: registering new adapter (Mygica T230C2 DVB-T/T2/C)
[ 3.470428] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 3.484115] dvbdev: dvb_create_media_entity: media entity 'Silicon Labs Si2168' registered.
[ 3.512675] rc rc0: lirc_dev: driver dvb_usb_cxusb registered at minor = 0, scancode receiver, no transmitter
[ 3.512676] dvb-usb: schedule remote query interval to 100 msecs.
[ 3.512728] dvb-usb: Mygica T230C2 DVB-T/T2/C successfully initialized and connected.
[ 3.512750] usbcore: registered new interface driver dvb_usb_cxusb
[ 6.886081] si2168 7-0064: downloading firmware from file 'dvb-demod-si2168-d60-01.fw'
[ 8.039785] si2157 8-0060: downloading firmware from file 'dvb-tuner-si2141-a10-01.fw'
:~ dmesg | grep dvb-demod
[ 6.886081] si2168 7-0064: downloading firmware from file 'dvb-demod-si2168-d60-01.fw'
:~ dmesg | grep dvb-tu
[ 8.039785] si2157 8-0060: downloading firmware from file 'dvb-tuner-si2141-a10-01.fw'
:~ dmesg | grep -i c68a
:~
T230C 3.png (66.4 KB) T230C 3.png | |||
T230C 2.png (93.6 KB) T230C 2.png | |||
dvb-demod-si2168-d60-01.fw (3.27 KB) dvb-demod-si2168-d60-01.fw | |||
T230C.png (185 KB) T230C.png | |||
dvb-tuner-si2141-a10-01.fw (1.63 KB) dvb-tuner-si2141-a10-01.fw |
Replies (7)
RE: Failed to scan chanels tvheadend DVB-C T230C2 MyGica - Added by saen acro over 4 years ago
Are you shure that cable tv is in DVB standard?
In Brazil terrestrial tv is in Japanese ATSC standart.
p.s.
Moderators to move topic to corect section of forum.
RE: Failed to scan chanels tvheadend DVB-C T230C2 MyGica - Added by Klein Johns over 4 years ago
Actually you are wrong, Japanese and Brazilian aerial tv use ISDBT standard.
Moreover, in Brazil you can use DVB-C cable from a provider company. I have a KIII Pro tv box that finds all tv channels on dvb-c using tvheadend.
RE: Failed to scan chanels tvheadend DVB-C T230C2 MyGica - Added by saen acro over 4 years ago
I'm not wrong I'm ask is it possible.
But if your device have dvb-c tuner and found channels
try to scan with WSCAN
first deactivate tuner in TVHeadend
w_scan -f c -x
if no success then driver not work
RE: Failed to scan chanels tvheadend DVB-C T230C2 MyGica - Added by Klein Johns over 4 years ago
How can I use w_scan?
RE: Failed to scan chanels tvheadend DVB-C T230C2 MyGica - Added by saen acro over 4 years ago
Install it first, simple logic.
And because maby next question is "How to install it"
There is a addon in Kodi interface.
RE: Failed to scan chanels tvheadend DVB-C T230C2 MyGica - Added by surfparadise . about 2 years ago
Hi,
I used your firmware files for my adapter T230C2, and finally I success to install it (all the firmware that I tried before, give me errors), but no services are recognised during the scan.
Could you help me to fix it?
thanks
Linux raspberrypi 5.15.61-v8+
dmesg |egrep "firmware|dvb|frontend|usb"
[ 0.151594] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-08-26T14:04:36, variant start
[ 0.155610] raspberrypi-firmware soc:firmware: Firmware hash is 102f1e848393c2112206fadffaaf86db04e98326
[ 0.222259] usbcore: registered new interface driver usbfs
[ 0.222365] usbcore: registered new interface driver hub
[ 0.222485] usbcore: registered new device driver usb
[ 0.223027] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.223316] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 1.885857] usbcore: registered new interface driver r8152
[ 1.889095] usbcore: registered new interface driver lan78xx
[ 1.892221] usbcore: registered new interface driver smsc95xx
[ 2.883369] dwc_otg 3f980000.usb: DWC OTG Controller
[ 2.885999] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 2.888754] dwc_otg 3f980000.usb: irq 74, io mem 0x00000000
[ 2.897296] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 2.902844] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.905799] usb usb1: Product: DWC OTG Controller
[ 2.908725] usb usb1: Manufacturer: Linux 5.15.61-v8+ dwc_otg_hcd
[ 2.911703] usb usb1: SerialNumber: 3f980000.usb
[ 2.923560] usbcore: registered new interface driver uas
[ 2.926781] usbcore: registered new interface driver usb-storage
[ 2.958573] usbcore: registered new interface driver usbhid
[ 2.961419] usbhid: USB HID core driver
[ 3.234140] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 3.470614] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 3.470641] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.946130] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 4.057639] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 4.378083] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.654136] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
[ 4.763364] usb 1-1.3: New USB device found, idVendor=0572, idProduct=c68a, bcdDevice= 8.00
[ 4.778378] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.789311] usb 1-1.3: Product: EyeTV Stick
[ 4.797030] usb 1-1.3: Manufacturer: Geniatech
[ 4.805023] usb 1-1.3: SerialNumber: 161206
[ 5.126150] usb 1-1.1.1: new high-speed USB device number 5 using dwc_otg
[ 5.235010] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00
[ 5.251059] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 11.772456] usb 1-1.3: dvb_usb_v2: found a 'MyGica Mini DVB-(T/T2/C) USB Stick T230C v2' in warm state
[ 11.773750] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 11.773878] dvbdev: DVB: registering new adapter (MyGica Mini DVB-(T/T2/C) USB Stick T230C v2)
[ 11.773907] usb 1-1.3: media controller created
[ 11.792756] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 11.850479] si2168 11-0064: firmware version: D 6.0.1
[ 11.897415] usb 1-1.3: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[ 11.897482] dvbdev: dvb_create_media_entity: media entity 'Silicon Labs Si2168' registered.
[ 11.900840] rc rc1: MyGica Mini DVB-(T/T2/C) USB Stick T230C v2 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc1
[ 11.901128] rc rc1: lirc_dev: driver dvb_usb_dvbsky registered at minor = 0, scancode receiver, no transmitter
[ 11.901438] input: MyGica Mini DVB-(T/T2/C) USB Stick T230C v2 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc1/input2
[ 11.961620] usb 1-1.3: dvb_usb_v2: schedule remote query interval to 300 msecs
[ 11.961679] usb 1-1.3: dvb_usb_v2: 'MyGica Mini DVB-(T/T2/C) USB Stick T230C v2' successfully initialized and connected
[ 11.962006] usbcore: registered new interface driver dvb_usb_dvbsky
[ 14.696570] si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-d60-01.fw'
[ 15.093068] si2168 11-0064: firmware version: D 6.0.2
[ 15.113356] si2157 12-0060: downloading firmware from file 'dvb-tuner-si2141-a10-01.fw'
[ 15.570733] si2157 12-0060: firmware version: 1.1.10
[ 15.581306] usb 1-1.3: DVB: adapter 0 frontend 0 frequency 0 out of range (48000000..870000000)
[ 15.592612] si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-d60-01.fw'
[ 15.984652] si2168 11-0064: firmware version: D 6.0.2
[ 589.542924] si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-d60-01.fw'
[ 589.946332] si2168 11-0064: firmware version: D 6.0.2
[ 1015.399554] si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-d60-01.fw'
[ 1015.802737] si2168 11-0064: firmware version: D 6.0.2
RE: Failed to scan chanels tvheadend DVB-C T230C2 MyGica - Added by daonguyen minhnhat about 2 years ago
I had the same problem as surfparadise .
I use a settopbox device to tune DVBC channels and there is no problem with the signal. Only when using TVH to scan DVBC channels, it fails