Project

General

Profile

Unicable setting

Added by gero sauerwald over 4 years ago

I have a problem to get my Tvheadend 4.2.8-36~g5bdcfd8ac running with a unicable sat setting. As hardware I do have a DVBSKy S952 v1, one port connected to a LNB unicable port the second to a legacy port of the LNB. The legacy port works fine. The output of w_scan looks also for the unicable port fine:

w_scan -fs -sS19E2 -a /dev/dvb/adapter0 -c UTF-8 -c DE -u 3:2040:A

w_scan version 20170107 (compiled for DVB API 5.10)
using settings for 19.2 east Astra 1KR/1L/1N/1M
SCR: slot=3, userfreq=2040MHz, satpos=A, pin=-1
scan type SATELLITE, channellist 68
output format vdr-2.0
output charset 'UTF-8'
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 > SATELLITE "Montage Technology M88DS3103": very good :))

Using SATELLITE frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.11
frontend 'Montage Technology M88DS3103' supports
INVERSION_AUTO
DVB-S
DVB-S2
FREQ (0.95GHz ... 2.15GHz)
SRATE (1.000MSym/s ... 45.000MSym/s)
using LNB "UNIVERSAL"
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
trying 'S2 f = 10729 kHz V SR = 22000 2/3 0,35 8PSK (0:0:0)'
(time: 00:00.019) signal ok: S2 f = 10729 kHz V SR = 22000 2/3 0,35 8PSK (0:0:0)
S2 f = 10729 kHz V SR = 22000 2/3 0,35 8PSK (0:0:0) : updating network_id -> (0:1:0)
new transponder: (S f = 11739 kHz V SR = 27500 3/4 0,35 QPSK (1:1:1066)) 0x4043

In tvh I am getting the error in the debug window:

mpegts: 00 in Sat - tuning on Montage Technology M88DS3103 #0 : DVB-S #0
en50494: transponder value bigger then 1023 for freq 9750000 (1210)
en50494: invalid tuning freq

Any ideas?

Futhermore I have a question for set up the unicable: In the unicable parameter window it is possible to configure only one SRC and frequency. How to set up e.g. four different SRC?

Thanx in advance

/gero


Replies (1)

RE: Unicable setting - Added by gero sauerwald over 4 years ago

Hej again,

is there anybody out there how is running a unicable setup with DVBSKy S952 v1 and current version of TVH?

Second part of my question is solved now.

/gero

    (1-1/1)