Project

General

Profile

Does TVH support Unicable/Jess positions?

Added by Pim Zandbergen over 6 years ago

I just got myself a Digital Devices MAX S8 SAT>IP tuner with two Inverto IDLU-32UL40-UNBOO-OPP LNB's.
The LNB's were pre-programmed by Digital Devices to positions A and B so they could be connected in parallel to one Unicable/Jess receiver using a Unicable combiner.
See https://www.digital-devices.eu/shop/de/unicable/multischalter-lnbs/295/unicable-ii-set-2-satelliten-unicable-lnb?c=220
I also got myself a power inserter to power the LNB's.

For starters, I just connected one LNB (programmed to position A) without using the combiner, or a power inserter.

When connecting e DD tuner, it comes up in TVH like a device supporting 4 diseqc positions.
I reduced the number of positions to two, so they show up as AA and AB.
Does that translate to Unicable/Jess positions A and B?

I'm not getting any signal right now.


Replies (4)

RE: Does TVH support Unicable/Jess positions? - Added by Pim Zandbergen over 6 years ago

As can be seen on the screenshots, I have other equipment to test with.
I also have two Telestar Digibit R1 tuners, running minisatip, with Dur-Line UK 124 LNB's.
The Dur-Line LNB's are not programmable, so can not be combined on a single tuner.

Here are some test results:

The MAX S8 would not work with a Dur-Line (I did adjust the Unicable frequencies).
The Telestar does work with a single Dur-Line on the same position (Astra 2).
The Telestar does work with a single Inverto LNB (after adjusting Unicable frequencies).
And, the Telestar does work with two Inverto LNB's using combiner and power inserter!

So, it appears TVH does support Unicable/Jess positions, and it appears something is wrong with the DD Max S8.

RE: Does TVH support Unicable/Jess positions? SOLVED - Added by Pim Zandbergen over 6 years ago

OK everything works now.
Apparently, Unicable LNB's need to be connected to port "D" on the Max S8.

    (1-4/4)