Forums » Tutorial and setups »
Can't receive Channels
Added by Benjamin Haag over 6 years ago
Hello,
I bought A DVB-C Stick and installes TVHeadend on my Raspberry But there i don't find any working service. Unfortunately I don't know about TVHeadend and TV tech, so I also don't know what information are important for you to help me. Here is what I tried.
The Stick itself works. I tried the delivered Software and it works fine.
I sticked on this tutorial
https://www.youtube.com/watch?v=KMlhuC-SWn8
Everything seems to work fine. But Every Mux fails by having no signal.
And I googled a lot but can't find anything to solve my Problem.
My System:
- Raspberry PI 3 Model B
- I use this stick
http://www.mediamarkt.de/de/product/_hauppauge-wintv-dualhd-2024831.html?uympq=vpqr&rbtc=%7C%7C%7C%7Cp%7CTV%20%26%20Audio%20%3E%20Fernseher%20%3E%20TV-Karten%7C&gclid=Cj0KCQjwjN7YBRCOARIsAFCb937Oulkyn4Fy5LCzTA8jB_q8DxB_cayQbbYEerb7FfUpLIWlkA94KF0aAvh0EALw_wcB&gclsrc=aw.ds&dclid=CP3bv8y4v9sCFQ044AodtQ4JiQ
- I live in Germany
- I use Raspbian Stretch ( latest version )
Now I just hope anyone here can help me solving that problem.
Replies (21)
RE: Can't receive Channels - Added by Mark Clarkstone over 6 years ago
What does the log at the bottom say? (click the bar).
To test if the stick is working stop tvheadend (sudo service tvheadend stop), install w_scan (sudo apt install w-scan) and run it as "sudo w_scan -fc -Cde".
RE: Can't receive Channels - Added by Benjamin Haag over 6 years ago
Mark Clarkstone wrote:
What does the log at the bottom say? (click the bar).
To test if the stick is working stop tvheadend (sudo service tvheadend stop), install w_scan (sudo apt install w-scan) and run it as "sudo w_scan -fc -Cde".
I don't know where to find Log files. But i found i should be able to set up what to log in Configuration -> Debugging -> Configuration. But in Configuration i don't see Debugging. By the way I use "HTS Tvheadend 4.3-1252~g595fd174f" (What bar do you mean?)
to the your w_scan. Yet it seems there are no drivers installed for it. This would explain the problem.
w_scan -fc -Cde w_scan version 20161022 (compiled for DVB API 5.10) WARNING: could not guess your country. Falling back to 'DE' guessing country 'DE', use -c <country> to override using settings for GERMANY DVB cable DVB-C scan type CABLE, channellist 7 output format vdr-2.0 output charset 'DE' Info: using DVB adapter auto detection. main:3916: FATAL: ***** NO USEABLE CABLE CARD FOUND. ***** Please check wether dvb driver is loaded and verify that no dvb application (i.e. vdr) is running.
I found a driver and I will try it tomorrow if you don't have an other idea. thanks till now I will write you
https://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-dualHD
The dmesg result you can see here
https://pastebin.com/kKKxHwTh
RE: Can't receive Channels - Added by Mark Clarkstone over 6 years ago
Your kernel has drivers, you're just missing firmware, see https://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-dualHD
RE: Can't receive Channels - Added by Benjamin Haag over 6 years ago
To Install the Firmware I downloaded it and put the fw file into /lib/firmware. After i rebooted. Not sure if this was right, because the w_scan output is still the same. But I found no other method to install fw files.
RE: Can't receive Channels - Added by saen acro over 6 years ago
This is the way to put them in correct location,
where driver search from them.
Post new
dmesg lsdvb
RE: Can't receive Channels - Added by Benjamin Haag over 6 years ago
saen acro wrote:
This is the way to put them in correct location,
where driver search from them.Post new
[...]
dmesg:
https://pastebin.com/cRVEjujh
lsdvb:
lsdvb: Simple utility to list PCI/PCIe DVB devices Version: 0.0.4 Copyright (C) Manu Abraham em28xx (0:0 1995522592:1995803856) on PCI Domain:8 Bus:86052 Device:1995523384 Function:21 DEVICE:0 ADAPTER:0 ERROR: Open frontend0 failed
RE: Can't receive Channels - Added by saen acro over 6 years ago
guess where is problem
[ 8.403464] brcmfmac: power management disabled [ 8.698213] si2168 4-0064: Direct firmware load for dvb-demod-si2168-b40-01.fw failed with error -2 [ 8.698276] si2168 4-0064: Direct firmware load for dvb-demod-si2168-02.fw failed with error -2 [ 8.698287] si2168 4-0064: firmware file 'dvb-demod-si2168-02.fw' not found <<<<<<<<<<<<<<<<<<<<<<<<< [ 8.714330] si2157 5-0060: found a 'Silicon Labs Si2157-A30' [ 8.769609] si2157 5-0060: firmware version: 3.0.5 [ 8.769665] em28xx 1-1.5:1.0: DVB: adapter 0 frontend 0 frequency 0 out of range (42000000..870000000) [ 8.798287] si2168 4-0064: Direct firmware load for dvb-demod-si2168-02.fw failed with error -2 [ 8.798317] si2168 4-0064: Direct firmware load for dvb-demod-si2168-02.fw failed with error -2 [ 8.798322] si2168 4-0064: firmware file 'dvb-demod-si2168-02.fw' not found <<<<<<<<<<<<<<<<<<<<<<<<<
RE: Can't receive Channels - Added by Benjamin Haag over 6 years ago
saen acro wrote:
guess where is problem
[...]
Well okay...
Searched the internet for that file. Found this
https://github.com/OpenELEC/dvb-firmware/blob/master/firmware/dvb-demod-si2168-02.fw
w_scan at this part is now
[ 8.574679] si2168 4-0064: Direct firmware load for dvb-demod-si2168-b40-01.fw failed with error -2 [ 8.584357] si2168 4-0064: please install firmware file 'dvb-demod-si2168-b40-01.fw' [ 8.584373] si2168 4-0064: downloading firmware from file 'dvb-demod-si2168-02.fw' [ 8.785702] si2168 4-0064: firmware version: B 4.0.4 [ 8.790365] si2157 5-0060: found a 'Silicon Labs Si2157-A30' [ 8.838883] si2157 5-0060: firmware version: 3.0.5 [ 8.838941] em28xx 1-1.5:1.0: DVB: adapter 0 frontend 0 frequency 0 out of range (42000000..870000000)
But I already have this file in the /lib/firmware folder and don't know what error -2 is.
RE: Can't receive Channels - Added by saen acro over 6 years ago
sudo wget https://github.com/OpenELEC/dvb-firmware/raw/master/firmware/dvb-demod-si2168-02.fw -O /lib/firmware/dvb-demod-si2168-02.fw
Is this command you use?
RE: Can't receive Channels - Added by Benjamin Haag over 6 years ago
saen acro wrote:
[...]
Is this command you use?
similar. I first downloaded it and then moved it to the destination folder.
I just used your command, but still the same outputs.
RE: Can't receive Channels - Added by saen acro over 6 years ago
Need reload of module or simple system restart.
RE: Can't receive Channels - Added by Benjamin Haag over 6 years ago
saen acro wrote:
Need reload of module or simple system restart.
I did. But i realized I switched two digits. The file I already installed is another one. Oops
[ 8.613978] si2168 4-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 8.865269] si2168 4-0064: firmware version: B 4.0.11 [ 8.868804] si2157 5-0060: found a 'Silicon Labs Si2157-A30' [ 8.917421] si2157 5-0060: firmware version: 3.0.5 [ 8.917483] em28xx 1-1.5:1.0: DVB: adapter 0 frontend 0 frequency 0 out of range (42000000..870000000)
But still no adapter
w_scan is still:
w_scan w_scan version 20161022 (compiled for DVB API 5.10) WARNING: could not guess your country. Falling back to 'DE' guessing country 'DE', use -c <country> to override using settings for GERMANY DVB aerial DVB-T Europe scan type TERRESTRIAL, channellist 4 output format vdr-2.0 WARNING: could not guess your codepage. Falling back to 'UTF-8' output charset 'UTF-8', use -C <charset> to override Info: using DVB adapter auto detection. main:3916: FATAL: ***** NO USEABLE TERRESTRIAL CARD FOUND. ***** Please check wether dvb driver is loaded and verify that no dvb application (i.e. vdr) is running.
RE: Can't receive Channels - Added by saen acro over 6 years ago
Now problem is other.
Tvheadend take ownership over tuner.
Do
sudo service tvheadend stop
and try again.
RE: Can't receive Channels - Added by Benjamin Haag over 6 years ago
Great! Now it scans
https://pastebin.com/nr2pjGdq
But it doesn't scan with the DVB-C Tuner. I now try to scan with a DVB-T/DVB-T2 Antenna And will report you. But I want to get the DVB-C Signal.
RE: Can't receive Channels - Added by Benjamin Haag over 6 years ago
Benjamin Haag wrote:
Great! Now it scans
https://pastebin.com/nr2pjGdqBut it doesn't scan with the DVB-C Tuner. I now try to scan with a DVB-T/DVB-T2 Antenna And will report you. But I want to get the DVB-C Signal.
DVB-T2 seem to get some channels. Now i only need to get the DVB-C adapter working. Do you have any ideas?
https://pastebin.com/BwdTsnGx
RE: Can't receive Channels - Added by saen acro over 6 years ago
what is command you use to scan?
w_scan -f c -F -t 3 -Q 2 -e 1 -v
slow and effective ;)
RE: Can't receive Channels - Added by Benjamin Haag over 6 years ago
saen acro wrote:
what is command you use to scan?
[...]
slow and effective
This is the result of your command
https://pastebin.com/dv4M238f
RE: Can't receive Channels - Added by saen acro over 6 years ago
Do you have signal?
Can you try tuner on other OS?
For example LibreElec
RE: Can't receive Channels - Added by Benjamin Haag over 6 years ago
saen acro wrote:
Do you have signal?
Can you try tuner on other OS?
For example LibreElec
I tried the tuner on windows with the original software and yes it worked fine.
RE: Can't receive Channels - Added by saen acro over 6 years ago
No more suggestions from me,
Brad Love creature is whatever it is
Idea to build kernel for one module is near impossible to be effective