Project

General

Profile

Astrometa DVB-T2

Added by Blejo Kosic almost 7 years ago

Hi all,

I am having trouble setting up tvheadend and the standard astrometa dvbt/t2/c stick https://www.linuxtv.org/wiki/index.php/Astrometa_DVB-T2.

I cant find a proper driver source, Tvheadend registers Realtek RTL2832 DVB T device, but it does not work.

w scan also says no dbv device has been found.

dmesg output gives me the following

[ 1.558620] usb 1-1: Product: dvbt2
[ 1.558622] usb 1-1: Manufacturer: astrometadvbt2
[ 3.059511] usb 1-1: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state
[ 3.970351] usb 1-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 3.970365] DVB: registering new adapter (Astrometa DVB-T2)
[ 4.006554] usb 1-1: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 4.006649] usb 1-1: DVB: registering adapter 0 frontend 1 (Panasonic MN88473)...
[ 4.090665] input: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/rc/rc0/input7
[ 4.090742] rc rc0: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/rc/rc0
[ 4.091496] usb 1-1: dvb_usb_v2: schedule remote query interval to 200 msecs
[ 4.098972] rc rc0: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 0
[ 4.110586] usb 1-1: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected
[ 4.110643] usbcore: registered new interface driver dvb_usb_rtl28xxu
[ 14.965967] usb 1-1: DVB: adapter 0 frontend 0 frequency 0 out of range (174000000..862000000)

Any ideas?


Replies (1)

RE: Astrometa DVB-T2 - Added by Blejo Kosic almost 7 years ago

Ok so after extensive googling I managed to get Panasonic MN88473 to work on w_scan with success in scaning .

Now tvheadend registers Panasonic MN88473 adapter but when searching MUXes nothing happens status is PENDING constantly, also no log of any event regarding the scan in the syslog.

    (1-1/1)