Tvheadend

Looks like a descambling issue. Check the log for errors.

Thanks for the reply
so does the DVB-S have any difference to the DVB-T?
Should it do the same thing with DVB-S as it does with DVB-T?

domenic ciciarelli wrote:

Thanks for the reply
so does the DVB-S have any difference to the DVB-T?
Should it do the same thing with DVB-S as it does with DVB-T?

If you open the webui & then click the bar at the bottom, you'll see a log.

Try playing a few streams with that open & take note of the errors.

2017-04-24 22:24:36.366 cwc: Can not descramble service "Rai 3 HD", access denied (seqno: 4929 Req delay: 140 ms) from cwc-serverworld2014.no-ip.org-17423-183D
2017-04-24 22:24:36.367 cwc: Can not descramble service "Rai 1 HD", access denied (seqno: 4930 Req delay: 140 ms) from cwc-serverworld2014.no-ip.org-17423-183D

2017-04-24 22:25:45.444 libav: Qavg: 804.916
2017-04-24 22:25:45.444 libav: 2 frames left in the queue on closing
2017-04-24 22:25:45.444 libav: frame I:12 Avg QP:20.58 size: 43385
2017-04-24 22:25:45.444 libav: frame P:166 Avg QP:23.71 size: 4170
2017-04-24 22:25:45.444 libav: mb I I16..4: 100.0% 0.0% 0.0%
2017-04-24 22:25:45.444 libav: mb P I16..4: 3.6% 0.0% 0.0% P16..4: 28.3% 0.0% 0.0% 0.0% 0.0% skip:68.1%
2017-04-24 22:25:45.444 libav: coded y,uvDC,uvAC intra: 80.7% 51.7% 38.3% inter: 15.4% 6.2% 2.0%
2017-04-24 22:25:45.444 libav: i16 v,h,dc,p: 23% 55% 15% 7%
2017-04-24 22:25:45.444 libav: i8c dc,h,v,p: 33% 48% 16% 3%
2017-04-24 22:25:45.444 libav: kb/s:1362.69

2017-04-24 22:26:43.866 libav: specified frame type is not compatible with max B-frames

2017-04-24 22:26:44.246 transcode: 04E2: Detected framedrop in audio
2017-04-24 22:26:44.307 transcode: 04E2: Using preset ultrafast
2017-04-24 22:26:44.307 libav: using SAR=1/1
2017-04-24 22:26:44.309 libav: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
2017-04-24 22:26:44.311 libav: profile Constrained Baseline, level 3.0
2017-04-24 22:26:44.311 libav: 264 - core 148 - H.264/MPEG-4 AVC codec - Copyleft 2003-2016 - http://www.videolan.org/x264.html - options: cabac=0 ref=1 deblock=0:0:0 analyse=0:0 me=dia subme=0 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=0 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=0 keyint=125 keyint_min=12 scenecut=0 intra_refresh=0 rc_lookahead=0 rc=abr mbtree=0 bitrate=1100 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 vbv_maxrate=1375 vbv_bufsize=4125 nal_hrd=none filler=0 ip_ratio=1.40 aq=0
2017-04-24 22:26:44.612 libav: Using AVStream.codec to pass codec parameters to muxers is deprecated, use AVStream.codecpar instead.
2017-04-24 22:26:44.612 libav: Using AVStream.codec to pass codec parameters to muxers is deprecated, use AVStream.codecpar instead.

2017-04-24 22:26:46.346 cwc: Can not descramble service "Rai 3 HD", access denied (seqno: 4962 Req delay: 104 ms) from cwc-serverworld2014.no-ip.org-17423-183D

-24 22:32:42.193 libav: specified frame type is not compatible with max B-frames
2017-04-24 22:32:42.304 libav: specified frame type is not compatible with max B-frames
2017-04-24 22:32:42.315 transcode: 04F7: Detected framedrop in audio
2017-04-24 22:32:42.338 transcode: 04F7: Using preset ultrafast
2017-04-24 22:32:42.338 libav: using SAR=1/1
2017-04-24 22:32:42.341 libav: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
2017-04-24 22:32:42.343 libav: profile Constrained Baseline, level 3.0
2017-04-24 22:32:42.343 libav: 264 - core 148 - H.264/MPEG-4 AVC codec - Copyleft 2003-2016 - http://www.videolan.org/x264.html - options: cabac=0 ref=1 deblock=0:0:0 analyse=0:0 me=dia subme=0 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=0 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=0 keyint=125 keyint_min=12 scenecut=0 intra_refresh=0 rc_lookahead=0 rc=abr mbtree=0 bitrate=1100 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 vbv_maxrate=1375 vbv_bufsize=4125 nal_hrd=none filler=0 ip_ratio=1.40 aq=0

2017-04-24 22:32:42.640 libav: Using AVStream.codec to pass codec parameters to muxers is deprecated, use AVStream.codecpar instead.
2017-04-24 22:32:42.640 libav: Using AVStream.codec to pass codec parameters to muxers is deprecated, use AVStream.codecpar instead.

These should not be mistakes, they are the only things that come to me from the log
It could be a mistake due to all the tests I did to activate the tbs6922 card, i tried a lot of guides
So damaging tvheadend?

domenic ciciarelli wrote:

2017-04-24 22:24:36.366 cwc: Can not descramble service "Rai 3 HD", access denied (seqno: 4929 Req delay: 140 ms) from cwc-serverworld2014.no-ip.org-17423-183D
2017-04-24 22:24:36.367 cwc: Can not descramble service "Rai 1 HD", access denied (seqno: 4930 Req delay: 140 ms) from cwc-serverworld2014.no-ip.org-17423-183D

2017-04-24 22:25:45.444 libav: Qavg: 804.916
2017-04-24 22:25:45.444 libav: 2 frames left in the queue on closing
2017-04-24 22:25:45.444 libav: frame I:12 Avg QP:20.58 size: 43385
2017-04-24 22:25:45.444 libav: frame P:166 Avg QP:23.71 size: 4170
2017-04-24 22:25:45.444 libav: mb I I16..4: 100.0% 0.0% 0.0%
2017-04-24 22:25:45.444 libav: mb P I16..4: 3.6% 0.0% 0.0% P16..4: 28.3% 0.0% 0.0% 0.0% 0.0% skip:68.1%
2017-04-24 22:25:45.444 libav: coded y,uvDC,uvAC intra: 80.7% 51.7% 38.3% inter: 15.4% 6.2% 2.0%
2017-04-24 22:25:45.444 libav: i16 v,h,dc,p: 23% 55% 15% 7%
2017-04-24 22:25:45.444 libav: i8c dc,h,v,p: 33% 48% 16% 3%
2017-04-24 22:25:45.444 libav: kb/s:1362.69

2017-04-24 22:26:43.866 libav: specified frame type is not compatible with max B-frames

2017-04-24 22:26:44.246 transcode: 04E2: Detected framedrop in audio
2017-04-24 22:26:44.307 transcode: 04E2: Using preset ultrafast
2017-04-24 22:26:44.307 libav: using SAR=1/1
2017-04-24 22:26:44.309 libav: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
2017-04-24 22:26:44.311 libav: profile Constrained Baseline, level 3.0
2017-04-24 22:26:44.311 libav: 264 - core 148 - H.264/MPEG-4 AVC codec - Copyleft 2003-2016 - http://www.videolan.org/x264.html - options: cabac=0 ref=1 deblock=0:0:0 analyse=0:0 me=dia subme=0 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=0 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=0 keyint=125 keyint_min=12 scenecut=0 intra_refresh=0 rc_lookahead=0 rc=abr mbtree=0 bitrate=1100 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 vbv_maxrate=1375 vbv_bufsize=4125 nal_hrd=none filler=0 ip_ratio=1.40 aq=0
2017-04-24 22:26:44.612 libav: Using AVStream.codec to pass codec parameters to muxers is deprecated, use AVStream.codecpar instead.
2017-04-24 22:26:44.612 libav: Using AVStream.codec to pass codec parameters to muxers is deprecated, use AVStream.codecpar instead.

2017-04-24 22:26:46.346 cwc: Can not descramble service "Rai 3 HD", access denied (seqno: 4962 Req delay: 104 ms) from cwc-serverworld2014.no-ip.org-17423-183D

-24 22:32:42.193 libav: specified frame type is not compatible with max B-frames
2017-04-24 22:32:42.304 libav: specified frame type is not compatible with max B-frames
2017-04-24 22:32:42.315 transcode: 04F7: Detected framedrop in audio
2017-04-24 22:32:42.338 transcode: 04F7: Using preset ultrafast
2017-04-24 22:32:42.338 libav: using SAR=1/1
2017-04-24 22:32:42.341 libav: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
2017-04-24 22:32:42.343 libav: profile Constrained Baseline, level 3.0
2017-04-24 22:32:42.343 libav: 264 - core 148 - H.264/MPEG-4 AVC codec - Copyleft 2003-2016 - http://www.videolan.org/x264.html - options: cabac=0 ref=1 deblock=0:0:0 analyse=0:0 me=dia subme=0 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=0 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=0 keyint=125 keyint_min=12 scenecut=0 intra_refresh=0 rc_lookahead=0 rc=abr mbtree=0 bitrate=1100 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 vbv_maxrate=1375 vbv_bufsize=4125 nal_hrd=none filler=0 ip_ratio=1.40 aq=0

2017-04-24 22:32:42.640 libav: Using AVStream.codec to pass codec parameters to muxers is deprecated, use AVStream.codecpar instead.
2017-04-24 22:32:42.640 libav: Using AVStream.codec to pass codec parameters to muxers is deprecated, use AVStream.codecpar instead.

These should not be mistakes, they are the only things that come to me from the log
It could be a mistake due to all the tests I did to activate the tbs6922 card, i tried a lot of guides
So damaging tvheadend?

No, your cwc provider is only allowing you to descramble one service at a time. This is nothing to do with Tvheadend. Notice the many "Can not descramble service" lines..

How can I solve it? What is cwc?

domenic ciciarelli wrote:

How can I solve it? What is cwc?

You need to ask whoever is running cwc-serverworld2014.no-ip.org to allow you to decode more than one service at the same time.

Cwc-serverworld2014.no-ip.org perfect for decoding multiple channels at the same time
I have in over a pretty amount of this writing in the log

2017-04-25 09:50:48.001 libav: specified frame type is not compatible with max B-frames

I also notice this message
2017-04-25 09: 51: 34.347 libav: Using AVStream.codec to pass codec parameters to muxers is deprecated, use AVStream.codecpar instead.

I noticed that and only a dvb-s defect this oscam with the usb dvb-t pen swap well and I can open multiple channels simultaneously, while always with the same oscam with dvb-s i can not open more channels simultaneously but dolo one turn

Hardware mode active, use budget mode.

Forgive me you will give me more info how to do it?

If I understand I should activate the budget mode, but this balancing from where CAs are to be activated? Is it a question of LNB or paper? thanks

domenic ciciarelli wrote:

If I understand I should activate the budget mode, but this balancing from where CAs are to be activated? Is it a question of LNB or paper? thanks

Ignore CAs right now. And like saen acro has said, fix your card first. My assumption that it was your CAs at fault was wrong.

It seems a bit odd that the card would even be in hardware pid filtering mode, most default to budget mode

Thanks, thanks for the reply
I tried more cards but the problem is always that i can not see from 2 3 pcs or devices, can i send a channel at a time by only one pc
I have this:
Http://prntscr.com/f112w3

It might be a tvheadend system error, but I tried with 3 different motherboards, and it always does the same thing
Could it be some setting that escapes me?
As I said before with AverMedia USB with this card I can see simultaneously with 2/3 computers, with only one DVB-S, if it was the paper, should not the same problem do with DVB-T usb?
Which instead makes me see quietly

Is there someone who can give me a hand, please?