Forums » Tutorial and setups »
[MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros
Added by saen acro almost 8 years ago
- Table of contents
- Manual debugging step by step
- GPU VA hardware acceleration aka Transcoding
- Short version of all needed packages
- How to clone Github repo to local folder
- ARM OpenMax support
- Python
- Automated build script
Manual debugging step by step¶
There is a manual in WIKI with says there is a some needed packages dependency
https://tvheadend.org/projects/tvheadend/wiki/Building
Following this manual (from wiki) there is no chance to make any package
So here is how to solve this:
(Ubuntu 14.04LTS x86_64 used but possible to be used on newer, even "x86" version)
There is a lot of packages with need to install
First packages from wiki
sudo apt install build-essential git pkg-config libssl-dev bzip2 wget libavahi-client-dev zlib1g-dev libavcodec-dev libavutil-dev libavformat-dev libswscale-dev libavresample-dev
so let see is this correct by running
./configure
and result is
/opt/tvheadend# ./configure Checking support/features checking for cc execinfo.h ... ok checking for cc -mmmx ... ok checking for cc -msse2 ... ok checking for cc -Wunused-result ... ok checking for cc getloadavg ... ok checking for cc atomic64 ... ok checking for cc atomic_time_t ... ok checking for cc bitops64 ... ok checking for cc lockowner ... ok checking for cc qsort_r ... ok checking for cc stime ... ok checking for cc gmtoff ... ok checking for cc recvmmsg ... ok checking for cc sendmmsg ... ok checking for cc libiconv ... fail checking for cc libdvben50221 ... fail checking for cc ifnames ... ok checking for py module gzip ... ok checking for pkg-config ... ok checking for xgettext ... fail ERROR: no gettext binaries found
surprise nothing happens
so we need package gettext
sudo apt install gettext
again configure command
/opt/tvheadend# ./configure Checking support/features checking for cc execinfo.h ... ok checking for cc -mmmx ... ok checking for cc -msse2 ... ok checking for cc -Wunused-result ... ok checking for cc getloadavg ... ok checking for cc atomic64 ... ok checking for cc atomic_time_t ... ok checking for cc bitops64 ... ok checking for cc lockowner ... ok checking for cc qsort_r ... ok checking for cc stime ... ok checking for cc gmtoff ... ok checking for cc recvmmsg ... ok checking for cc sendmmsg ... ok checking for cc libiconv ... fail checking for cc libdvben50221 ... fail checking for cc ifnames ... ok checking for py module gzip ... ok checking for pkg-config ... ok checking for xgettext ... ok checking for msgmerge ... ok checking for gzip ... ok checking for bzip2 ... ok checking for pkg openssl ... ok (detected 1.0.1f) checking for cc linux/dvb/version.h ... ok checking for pkg zlib ... ok (detected 1.2.8) checking for pkg liburiparser ... fail (detected <none>) checking for pkg avahi-client ... ok (detected 0.6.31) checking for cmake ... fail ERROR: cmake not found
Again missing essential part
sudo apt install cmake
Again configure ShowHide
/opt/tvheadend# ./configure Checking support/features checking for cc execinfo.h ... ok checking for cc -mmmx ... ok checking for cc -msse2 ... ok checking for cc -Wunused-result ... ok checking for cc getloadavg ... ok checking for cc atomic64 ... ok checking for cc atomic_time_t ... ok checking for cc bitops64 ... ok checking for cc lockowner ... ok checking for cc qsort_r ... ok checking for cc stime ... ok checking for cc gmtoff ... ok checking for cc recvmmsg ... ok checking for cc sendmmsg ... ok checking for cc libiconv ... fail checking for cc libdvben50221 ... fail checking for cc ifnames ... ok checking for py module gzip ... ok checking for pkg-config ... ok checking for xgettext ... ok checking for msgmerge ... ok checking for gzip ... ok checking for bzip2 ... ok checking for pkg openssl ... ok (detected 1.0.1f) checking for cc linux/dvb/version.h ... ok checking for pkg zlib ... ok (detected 1.2.8) checking for pkg liburiparser ... fail (detected <none>) checking for pkg avahi-client ... ok (detected 0.6.31) checking for cmake ... ok checking for cc -lstdc++ ... ok checking for cc nvEncodeAPI.h ... fail checking for cc sys/inotify.h ... ok fetching dvb-scan files ... ok checking for pkg dbus-1 ... ok (detected 1.6.18) Compiler: Using C compiler: cc Build for arch: x86_64 Binaries: Using PYTHON: python Using GZIP: gzip Using BZIP2: bzip2 Options: pie yes ccdebug no cwc yes capmt yes constcw yes linuxdvb yes satip_server yes satip_client yes hdhomerun_client yes hdhomerun_static yes iptv yes tsfile yes dvbscan yes timeshift yes trace yes imagecache yes avahi yes zlib yes libav yes ffmpeg_static yes libx264 yes libx264_static yes libx265 yes libx265_static yes libvpx yes libvpx_static yes libtheora yes libtheora_static yes libvorbis yes libvorbis_static yes libfdkaac yes libfdkaac_static yes nvenc no qsv no libmfx_static no inotify yes epoll yes uriparser no ccache no tvhcsa yes bundle no dvbcsa no dvben50221 no kqueue no dbus_1 yes android no tsdebug no gtimer_check no slow_memoryinfo no libsystemd_daemon no bintray_cache yes execinfo yes mmx yes sse2 yes W_unused_result yes getloadavg yes atomic64 yes atomic_time_t yes bitops64 yes lockowner yes qsort_r yes stime yes gmtoff yes recvmmsg yes sendmmsg yes ifnames yes py_gzip yes bin_pkg_config yes bin_xgettext yes bin_msgmerge yes bin_gzip yes bin_bzip2 yes ssl yes linuxdvbapi yes upnp yes bin_cmake yes stdcpp yes libogg_static yes inotify_h yes mpegts yes mpegts_dvb yes Packages: openssl 1.0.1f zlib 1.2.8 avahi-client 0.6.31 dbus-1 1.6.18 Installation paths: Prefix: /usr/local Binaries: ${prefix}/bin Libraries: ${prefix}/lib Data files: ${prefix}/share Man pages: ${datadir}/man Final Binary: /opt/tvheadend/build.linux/tvheadend Tvheadend Data Directory: /usr/local/share/tvheadend
And success, there is a chance to build .DEB, but is it so simple are we miss some?
checking for cc libiconv ... fail checking for cc libdvben50221 ... fail checking for pkg liburiparser ... fail (detected <none>)
those maby not 100% needed but lets install it:
libiconv
there is some strange with this library in newer version it is build in in in other library
sudo apt install libiconv-hook-dev
/// this will not solve dependency error message, maby error in configure script
libdvben50221
this is DVB-CI support for hardware CAM module on some devices
solved by instaling dvb-apps
sudo apt install dvb-apps
liburiparser
sudo apt install liburiparser-dev
Let's see with configure ShowHide
/opt/tvheadend# ./configure Checking support/features checking for cc execinfo.h ... ok checking for cc -mmmx ... ok checking for cc -msse2 ... ok checking for cc -Wunused-result ... ok checking for cc getloadavg ... ok checking for cc atomic64 ... ok checking for cc atomic_time_t ... ok checking for cc bitops64 ... ok checking for cc lockowner ... ok checking for cc qsort_r ... ok checking for cc stime ... ok checking for cc gmtoff ... ok checking for cc recvmmsg ... ok checking for cc sendmmsg ... ok checking for cc libiconv ... fail checking for cc libdvben50221 ... ok checking for cc ifnames ... ok checking for py module gzip ... ok checking for pkg-config ... ok checking for xgettext ... ok checking for msgmerge ... ok checking for gzip ... ok checking for bzip2 ... ok checking for pkg openssl ... ok (detected 1.0.1f) checking for cc linux/dvb/version.h ... ok checking for pkg zlib ... ok (detected 1.2.8) checking for pkg liburiparser ... ok (detected 0.7.5) checking for pkg avahi-client ... ok (detected 0.6.31) checking for cmake ... ok checking for cc -lstdc++ ... ok checking for cc nvEncodeAPI.h ... fail checking for cc sys/inotify.h ... ok fetching dvb-scan files ... ok checking for pkg dbus-1 ... ok (detected 1.6.18) Compiler: Using C compiler: cc Using LD flags: -ldvben50221 -ldvbapi -lucsi Build for arch: x86_64 Binaries: Using PYTHON: python Using GZIP: gzip Using BZIP2: bzip2 Options: pie yes ccdebug no cwc yes capmt yes constcw yes linuxdvb yes satip_server yes satip_client yes hdhomerun_client yes hdhomerun_static yes iptv yes tsfile yes dvbscan yes timeshift yes trace yes imagecache yes avahi yes zlib yes libav yes ffmpeg_static yes libx264 yes libx264_static yes libx265 yes libx265_static yes libvpx yes libvpx_static yes libtheora yes libtheora_static yes libvorbis yes libvorbis_static yes libfdkaac yes libfdkaac_static yes nvenc no qsv no libmfx_static no inotify yes epoll yes uriparser yes ccache no tvhcsa yes bundle no dvbcsa no dvben50221 yes kqueue no dbus_1 yes android no tsdebug no gtimer_check no slow_memoryinfo no libsystemd_daemon no bintray_cache yes execinfo yes mmx yes sse2 yes W_unused_result yes getloadavg yes atomic64 yes atomic_time_t yes bitops64 yes lockowner yes qsort_r yes stime yes gmtoff yes recvmmsg yes sendmmsg yes libdvben50221 yes ifnames yes py_gzip yes bin_pkg_config yes bin_xgettext yes bin_msgmerge yes bin_gzip yes bin_bzip2 yes ssl yes linuxdvbapi yes upnp yes bin_cmake yes stdcpp yes libogg_static yes inotify_h yes linuxdvb_ca yes mpegts yes mpegts_dvb yes Packages: openssl 1.0.1f zlib 1.2.8 liburiparser 0.7.5 avahi-client 0.6.31 dbus-1 1.6.18 Installation paths: Prefix: /usr/local Binaries: ${prefix}/bin Libraries: ${prefix}/lib Data files: ${prefix}/share Man pages: ${datadir}/man Final Binary: /opt/tvheadend/build.linux/tvheadend Tvheadend Data Directory: /usr/local/share/tvheadend
Some will ask about
checking for cc nvEncodeAPI.h ... fail
this is NVENC (nVidia hardware accelerator for transcoding)
I don't use nVidia can't help, there is a separate topic
So let's continue with bulding of .DEB packages.
Next step is to use Autobuild.sh, with will make all automatically. or not.
/opt/tvheadend# ./Autobuild.sh dpkg-buildpackage: пакет източник tvheadend dpkg-buildpackage: source version 4.1-2398~gc38af4c dpkg-buildpackage: source distribution unstable dpkg-buildpackage: source changed by Andreas Öman <[email protected]> dpkg-buildpackage: host architecture amd64 dpkg-source --before-build tvheadend dpkg-checkbuilddeps: Unmet build dependencies: debhelper (>= 7.0.50) libcurl4-gnutls-dev dpkg-buildpackage: warning: build dependencies/conflicts unsatisfied; aborting dpkg-buildpackage: warning: (Use -d flag to override.)
Again something missing
sudo apt install debhelper libcurl4-gnutls-dev
Crossing fingers an run again Autobuild.sh
If everything is OK,
compilation of FFMPEG X264/5 OGG AAC and some other codecs will be compiled before TVHeadend and finally .DEB files.
If there is no critical errors at the end there is show something as this
dpkg-buildpackage: binary only upload (no source included) doozer-versioned-artifact:/opt/tvheadend/../tvheadend_4.1-2398~gc38af4c_amd64.deb:deb:application/x-deb:tvheadend_4.1-2398~gc38af4c_amd64.deb doozer-versioned-artifact:/opt/tvheadend/../tvheadend-dbg_4.1-2398~gc38af4c_amd64.deb:deb:application/x-deb:tvheadend-dbg_4.1-2398~gc38af4c_amd64.deb doozer-versioned-artifact:/opt/tvheadend/../tvheadend_4.1-2398~gc38af4c_amd64.changes:changes:text/plain:tvheadend_4.1-2398~gc38af4c_amd64.changes
/opt/tvheadend/../
this mean that I'm using /opt/tvheadend/ (source from git)
and files are generated in ../ (upper level) in this case /opt
installation can be done by command
sudo dpkg -i tvheadend_4.1-2398~gc38af4c_amd64.deb
=====
Edit new dependency libpcre /Perl 5 Compatible Regular Expression Library/
to install it add
Sudo apt instal libpcre2-dev
Warning library is not accessible to all OS versions then use libpcre3-dev
GPU VA hardware acceleration aka Transcoding¶
checking for pkg libva >=0.38.0 ... ok (detected 0.39.0)
checking for pkg libva-x11 >=0.38.0 ... ok (detected 0.39.0)
checking for pkg libva-drm >=0.38.0 ... ok (detected 0.39.0)
libva-dev
libva-drm1 (libva-drm2)
libva-x11-1 (libva-x11-1)
i965-va-driver-shaders (Latest Debian probably Ubuntu 20.04 for Intel GPU)
to work hardware need to support VA-API version minimum 0.39.0
ex.
ShowHide
i5-4440 - HD4600
# vainfo
error: XDG_RUNTIME_DIR not set in the environment.
error: can't connect to X server!
libva info: VA-API version 0.39.0 <<<<<<<<<<<<<<<<<<<<<<<<<<<
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so
libva info: Found init function __vaDriverInit_0_39
libva info: va_openDriver() returns 0
vainfo: VA-API version: 0.39 (libva 1.7.0)
vainfo: Driver version: Intel i965 driver for Intel(R) Haswell Desktop - 1.7.0
vainfo: Supported profile and entrypoints
VAProfileMPEG2Simple : VAEntrypointVLD
VAProfileMPEG2Simple : VAEntrypointEncSlice
VAProfileMPEG2Main : VAEntrypointVLD
VAProfileMPEG2Main : VAEntrypointEncSlice
VAProfileH264ConstrainedBaseline: VAEntrypointVLD
VAProfileH264ConstrainedBaseline: VAEntrypointEncSlice
VAProfileH264Main : VAEntrypointVLD
VAProfileH264Main : VAEntrypointEncSlice
VAProfileH264High : VAEntrypointVLD
VAProfileH264High : VAEntrypointEncSlice
VAProfileH264MultiviewHigh : VAEntrypointVLD
VAProfileH264MultiviewHigh : VAEntrypointEncSlice
VAProfileH264StereoHigh : VAEntrypointVLD
VAProfileH264StereoHigh : VAEntrypointEncSlice
VAProfileVC1Simple : VAEntrypointVLD
VAProfileVC1Main : VAEntrypointVLD
VAProfileVC1Advanced : VAEntrypointVLD
VAProfileNone : VAEntrypointVideoProc
VAProfileJPEGBaseline : VAEntrypointVLD
there is a situation when Intel drivers are very buggy but work also
ex:
ShowHide
Intel Corporation Atom Processor D410 - IGMA3510
#vainfo
error: XDG_RUNTIME_DIR not set in the environment.
error: can't connect to X server!
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/i386-linux-gnu/dri/i965_drv_video.so
libva info: Found init function __vaDriverInit_0_39
libva error: /usr/lib/i386-linux-gnu/dri/i965_drv_video.so init failed
libva info: va_openDriver() returns -1
vaInitialize failed with error code -1 (unknown libva error),exit
Short version of all needed packages¶
sudo apt install build-essential git ccache libpcre2-dev pkg-config libssl-dev bzip2 \
wget libavahi-client-dev zlib1g-dev libavcodec-dev libavutil-dev libavformat-dev \
libswscale-dev libavresample-dev gettext cmake libiconv-hook-dev liburiparser-dev \
debhelper libcurl4-gnutls-dev python-minimal libdvbcsa-dev python-requests
If libpcre2-dev not found use libpcre3-dev
Optional packages for optional features
sudo apt install dvb-apps libva-dev libva-drm1 libva-x11-1
If used Ubuntu 18.04+ libva-drm2 libva-x11-2
To enable SYSTEMD service --enable-libsystemd_daemon on Ubuntu 18.04 and upper, install libsystemd-dev
Keep in mind, this will install ~400+Mb packages.
Some packages will install other packages to satisfy its dependencies
How to clone Github repo to local folder¶
Usually regular command to clone repo is
git clone https://github.com/tvheadend/tvheadend.git
This will download latest source code (unstable) ready for compilation
but if need stable or other
use command
git clone -b release/4.2 https://github.com/tvheadend/tvheadend.git
command explained
git clone -b <branch> <remote_repo>
branch list can be seen at https://github.com/tvheadend/tvheadend
ARM OpenMax support¶
Use only on ARM boards
apt install libomxil-bellagio-dev
do not forget to add option
--enable-omx
Python¶
Autobuild script search for python but it was replaced by python3
solution:
--python=/usr/bin/python3
Automated build script¶
Currently just clone only latest repo source code and compile it
#!/bin/bash
BASE=$(dirname "$0")
(
if [ -d "$BASE/tvheadend" ]; then
cd "$BASE/tvheadend"
git pull
else
cd "$BASE"
git clone https://github.com/tvheadend/tvheadend.git tvheadend # --depth=5 (need version tag workaround else 0.0.0 version)
cd "$BASE/tvheadend"
fi
time AUTOBUILD_CONFIGURE_EXTRA="--disable-bintray_cache --enable-vaapi --enable-nvenc --disable-hdhomerun_client --disable-hdhomerun_static " ./Autobuild.sh -j$(nproc) # edit only betwin "quotation marks"
) | tee "$BASE/build.log"
Use command
./configure --help
to see possible options.
Usage: ./configure [options] Miscellaneous --help Print this message Installation Paths --prefix=DIR$ Installation root [/usr/local] --bindir=DIR Install binaries in DIR [${prefix}/bin] --libdir=DIR Install libraries in DIR [${prefix}/lib] --mandir=DIR Install man pages in DIR [${datadir}/man] --datadir=DIR Install data files in DIR [${prefix}/share] Compiler/Arch --cc=CC Build using compiler [cc] --cflags=CFLAGS Build using C flags --ldflags=LDFLAGS Build using LD flags --cpu=CPU Build and optimize for specific CPU --arch=ARCH Build for architecture [x86_64] --platform=PLATFORM Build for platform [linux] --nowerror Build without -Werror CFLAGS --python=PYTHON Use python binary [python] Options --disable-pie Disable pie --enable-ccdebug Enable ccdebug --disable-cardclient Disable cardclient --enable-cardclient Enable cardclient --disable-cwc Disable cwc --disable-cccam Disable cccam --disable-capmt Disable capmt --disable-constcw Disable constcw --disable-linuxdvb Disable linuxdvb --disable-satip_server Disable satip_server --disable-satip_client Disable satip_client --enable-hdhomerun_client Enable hdhomerun_client --disable-hdhomerun_static Disable hdhomerun_static --disable-iptv Disable iptv --disable-tsfile Disable tsfile --disable-dvbscan Disable dvbscan --disable-timeshift Disable timeshift --disable-trace Disable trace --disable-avahi Disable avahi --enable-avahi Enable avahi --disable-zlib Disable zlib --enable-zlib Enable zlib --disable-libav Disable libav --enable-libav Enable libav --disable-ffmpeg_static Disable ffmpeg_static --disable-libx264 Disable libx264 --disable-libx264_static Disable libx264_static --disable-libx265 Disable libx265 --disable-libx265_static Disable libx265_static --disable-libvpx Disable libvpx --disable-libvpx_static Disable libvpx_static --disable-libtheora Disable libtheora --disable-libtheora_static Disable libtheora_static --disable-libvorbis Disable libvorbis --disable-libvorbis_static Disable libvorbis_static --enable-libfdkaac Enable libfdkaac --disable-libfdkaac_static Disable libfdkaac_static --disable-libopus Disable libopus --disable-libopus_static Disable libopus_static --enable-nvenc Enable nvenc --disable-vaapi Disable vaapi --enable-vaapi Enable vaapi --enable-mmal Enable mmal --enable-omx Enable omx --disable-inotify Disable inotify --enable-inotify Enable inotify --disable-epoll Disable epoll --enable-epoll Enable epoll --disable-pcre Disable pcre --enable-pcre Enable pcre --disable-pcre2 Disable pcre2 --enable-pcre2 Enable pcre2 --disable-uriparser Disable uriparser --enable-uriparser Enable uriparser --disable-ccache Disable ccache --enable-ccache Enable ccache --disable-tvhcsa Disable tvhcsa --enable-tvhcsa Enable tvhcsa --enable-bundle Enable bundle --enable-pngquant Enable pngquant --enable-kqueue Enable kqueue --disable-dbus_1 Disable dbus_1 --enable-dbus_1 Enable dbus_1 --enable-android Enable android --enable-gtimer_check Enable gtimer_check --enable-slow_memoryinfo Enable slow_memoryinfo --enable-libsystemd_daemon Enable libsystemd_daemon --disable-pcloud_cache Disable pcloud_cache --disable-ddci Disable ddci --enable-cclang_threadsan Enable cclang_threadsan --enable-gperftools Enable gperftools
Replies (92)
RE: Build .DEB packages on clean Ubuntu - Added by Detlev Hoffmann almost 8 years ago
Thanks a lot.
That helped me building and installing it on Ubuntu 16.10 server on my ASRock J3455-ITX.
One item i had to add:sudo apt-get install curl
before the autobuild.sh run.
RE: Build .DEB packages on clean Ubuntu - Added by saen acro almost 8 years ago
I'm glad to help you
topic need to be pinned on top
RE: Build .DEB packages on clean Ubuntu - Added by Njuskalo Njusko over 7 years ago
Perfect ! Thanks a lot !
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by Bapak Ireng over 7 years ago
Perfect ! Five Stars Manual to be able to compile on DEBIAN 9 as well!
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by Giuseppe Sicilia about 7 years ago
Thanks a lot. Very nice. This should be added in wiki...
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by saen acro over 6 years ago
Added python-minimal
is anyone can found dependences of
checking for cc cclang_threadsan ... fail
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by Wesley Rodrigues about 6 years ago
What is login and password?
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by saen acro about 6 years ago
Wesley Rodrigues wrote:
What is login and password?
during install will be ask to set credentials
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by saen acro about 6 years ago
added dependency python-requests
if during install get message about
systemctl: error while loading shared libraries: libjson-c.so.3: cannot open shared object file: No such file or directory
it mean that libjson-c2 / libjson-c3 is not installed.
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by andrei tanasescu over 5 years ago
hi,
I am trying to compile on a raspberry pi 3B+ (raspbian stretch
, with kernel 4.14.98
) with transcoding using:
AUTOBUILD_CONFIGURE_EXTRA=--disable-libvpx\ --disable-libx265\ --disable-libtheora\ --disable-libvorbis\ --disable-hdhomerun_client\ --disable-hdhomerun_static\ --disable-bintray_cache\ --enable-libffmpeg_static\ --enable-omx\ --enable-mmal\ --disable-libopus ./Autobuild.sh
tried adding new *.conf under /etc/ld.so.conf.d/
that contained /opt/vc/lib
, ran sudo ldconfig
and tried compiling again, but still the same error.
any suggestions greatly appreciated!
compile fails with the following:
Markdown: docs/wizard/status.md CC src/docs.o CC build.o CC timestamp.o CC tvheadend /usr/bin/ld: cannot find -lmmal_core /usr/bin/ld: cannot find -lmmal_util /usr/bin/ld: cannot find -lmmal_vc_client /usr/bin/ld: cannot find -lbcm_host collect2: error: ld returned 1 exit status Makefile:709: recipe for target '/home/pi/app_sources/tvheadend/build.linux/tvheadend' failed make[3]: *** [/home/pi/app_sources/tvheadend/build.linux/tvheadend] Error 1 make[3]: Leaving directory '/home/pi/app_sources/tvheadend' Makefile:107: recipe for target 'ffmpeg_all' failed make[2]: *** [ffmpeg_all] Error 2 make[2]: Leaving directory '/home/pi/app_sources/tvheadend' debian/rules:15: recipe for target 'override_dh_auto_build' failed make[1]: *** [override_dh_auto_build] Error 2 make[1]: Leaving directory '/home/pi/app_sources/tvheadend' debian/rules:6: recipe for target 'build' failed make: *** [build] Error 2 dpkg-buildpackage: error: debian/rules build gave error exit status 2
libraries exist:
ls -l /opt/vc/lib/ | grep mmal -rw-r--r-- 1 root root 68884 Apr 3 23:54 libmmal_components.so -rw-r--r-- 1 root root 82168 Apr 3 23:54 libmmal_core.so -rw-r--r-- 1 root root 15368 Apr 3 23:54 libmmal.so -rw-r--r-- 1 root root 91040 Apr 3 23:54 libmmal_util.so -rw-r--r-- 1 root root 44424 Apr 3 23:54 libmmal_vc_client.so ls -l /opt/vc/lib/ | grep bcm -rw-r--r-- 1 root root 99516 Apr 3 23:54 libbcm_host.so
ld doesn't seem to look in /opt/vc/lib
ld -lmmal_core --verbose: GNU ld (GNU Binutils for Raspbian) 2.28 Supported emulations: armelf_linux_eabi armelfb_linux_eabi using internal linker script: ================================================== /* Script for -z combreloc: combine and sort reloc sections */ /* Copyright (C) 2014-2017 Free Software Foundation, Inc. Copying and distribution of this script, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved. */ OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm") OUTPUT_ARCH(arm) ENTRY(_start) SEARCH_DIR("=/usr/local/lib/arm-linux-gnueabihf"); SEARCH_DIR("=/lib/arm-linux-gnueabihf"); SEARCH_DIR("=/usr/lib/arm-linux-gnueabihf"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib"); SEARCH_DIR("=/usr/arm-linux-gnueabihf/lib"); SECTIONS { /* Read-only sections, merged into text segment: */ PROVIDE (__executable_start = SEGMENT_START("text-segment", 0x00010000)); . = SEGMENT_START("text-segment", 0x00010000) + SIZEOF_HEADERS; .interp : { *(.interp) } .note.gnu.build-id : { *(.note.gnu.build-id) } .hash : { *(.hash) } .gnu.hash : { *(.gnu.hash) } .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .gnu.version : { *(.gnu.version) } .gnu.version_d : { *(.gnu.version_d) } .gnu.version_r : { *(.gnu.version_r) } .rel.dyn : { *(.rel.init) *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) *(.rel.fini) *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*) *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) *(.rel.ctors) *(.rel.dtors) *(.rel.got) *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) PROVIDE_HIDDEN (__rel_iplt_start = .); *(.rel.iplt) PROVIDE_HIDDEN (__rel_iplt_end = .); } .rela.dyn : { *(.rela.init) *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) *(.rela.fini) *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) *(.rela.ctors) *(.rela.dtors) *(.rela.got) *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) PROVIDE_HIDDEN (__rela_iplt_start = .); *(.rela.iplt) PROVIDE_HIDDEN (__rela_iplt_end = .); } .rel.plt : { *(.rel.plt) } .rela.plt : { *(.rela.plt) } .init : { KEEP (*(SORT_NONE(.init))) } .plt : { *(.plt) } .iplt : { *(.iplt) } .text : { *(.text.unlikely .text.*_unlikely .text.unlikely.*) *(.text.exit .text.exit.*) *(.text.startup .text.startup.*) *(.text.hot .text.hot.*) *(.text .stub .text.* .gnu.linkonce.t.*) /* .gnu.warning sections are handled specially by elf32.em. */ *(.gnu.warning) *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx) } .fini : { KEEP (*(SORT_NONE(.fini))) } PROVIDE (__etext = .); PROVIDE (_etext = .); PROVIDE (etext = .); .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) } .rodata1 : { *(.rodata1) } .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } PROVIDE_HIDDEN (__exidx_start = .); .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } PROVIDE_HIDDEN (__exidx_end = .); .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) } .eh_frame : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) } .gcc_except_table : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) } .gnu_extab : ONLY_IF_RO { *(.gnu_extab*) } /* These sections are generated by the Sun/Oracle C++ compiler. */ .exception_ranges : ONLY_IF_RO { *(.exception_ranges .exception_ranges*) } /* Adjust the address for the data segment. We want to adjust up to the same address within the page on the next page up. */ . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE)); /* Exception handling */ .eh_frame : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) } .gnu_extab : ONLY_IF_RW { *(.gnu_extab) } .gcc_except_table : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) } .exception_ranges : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) } /* Thread Local Storage sections */ .tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) } .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) } .preinit_array : { PROVIDE_HIDDEN (__preinit_array_start = .); KEEP (*(.preinit_array)) PROVIDE_HIDDEN (__preinit_array_end = .); } .init_array : { PROVIDE_HIDDEN (__init_array_start = .); KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*))) KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors)) PROVIDE_HIDDEN (__init_array_end = .); } .fini_array : { PROVIDE_HIDDEN (__fini_array_start = .); KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*))) KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors)) PROVIDE_HIDDEN (__fini_array_end = .); } .ctors : { /* gcc uses crtbegin.o to find the start of the constructors, so we make sure it is first. Because this is a wildcard, it doesn't matter if the user does not actually link against crtbegin.o; the linker won't look for a file to match a wildcard. The wildcard also means that it doesn't matter which directory crtbegin.o is in. */ KEEP (*crtbegin.o(.ctors)) KEEP (*crtbegin?.o(.ctors)) /* We don't want to include the .ctor section from the crtend.o file until after the sorted ctors. The .ctor section from the crtend file contains the end of ctors marker and it must be last */ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors)) KEEP (*(SORT(.ctors.*))) KEEP (*(.ctors)) } .dtors : { KEEP (*crtbegin.o(.dtors)) KEEP (*crtbegin?.o(.dtors)) KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors)) KEEP (*(SORT(.dtors.*))) KEEP (*(.dtors)) } .jcr : { KEEP (*(.jcr)) } .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) } .dynamic : { *(.dynamic) } . = DATA_SEGMENT_RELRO_END (0, .); .got : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) } .data : { PROVIDE (__data_start = .); *(.data .data.* .gnu.linkonce.d.*) SORT(CONSTRUCTORS) } .data1 : { *(.data1) } _edata = .; PROVIDE (edata = .); . = .; __bss_start = .; __bss_start__ = .; .bss : { *(.dynbss) *(.bss .bss.* .gnu.linkonce.b.*) *(COMMON) /* Align here to ensure that the .bss section occupies space up to _end. Align after .bss to ensure correct alignment even if the .bss section disappears because there are no input sections. FIXME: Why do we need it? When there is no .bss section, we don't pad the .data section. */ . = ALIGN(. != 0 ? 32 / 8 : 1); } _bss_end__ = . ; __bss_end__ = . ; . = ALIGN(32 / 8); . = SEGMENT_START("ldata-segment", .); . = ALIGN(32 / 8); __end__ = . ; _end = .; PROVIDE (end = .); . = DATA_SEGMENT_END (.); /* Stabs debugging sections. */ .stab 0 : { *(.stab) } .stabstr 0 : { *(.stabstr) } .stab.excl 0 : { *(.stab.excl) } .stab.exclstr 0 : { *(.stab.exclstr) } .stab.index 0 : { *(.stab.index) } .stab.indexstr 0 : { *(.stab.indexstr) } .comment 0 : { *(.comment) } /* DWARF debug sections. Symbols in the DWARF debugging sections are relative to the beginning of the section so we begin them at 0. */ /* DWARF 1 */ .debug 0 : { *(.debug) } .line 0 : { *(.line) } /* GNU DWARF 1 extensions */ .debug_srcinfo 0 : { *(.debug_srcinfo) } .debug_sfnames 0 : { *(.debug_sfnames) } /* DWARF 1.1 and DWARF 2 */ .debug_aranges 0 : { *(.debug_aranges) } .debug_pubnames 0 : { *(.debug_pubnames) } /* DWARF 2 */ .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } .debug_abbrev 0 : { *(.debug_abbrev) } .debug_line 0 : { *(.debug_line .debug_line.* .debug_line_end ) } .debug_frame 0 : { *(.debug_frame) } .debug_str 0 : { *(.debug_str) } .debug_loc 0 : { *(.debug_loc) } .debug_macinfo 0 : { *(.debug_macinfo) } /* SGI/MIPS DWARF 2 extensions */ .debug_weaknames 0 : { *(.debug_weaknames) } .debug_funcnames 0 : { *(.debug_funcnames) } .debug_typenames 0 : { *(.debug_typenames) } .debug_varnames 0 : { *(.debug_varnames) } /* DWARF 3 */ .debug_pubtypes 0 : { *(.debug_pubtypes) } .debug_ranges 0 : { *(.debug_ranges) } /* DWARF Extension. */ .debug_macro 0 : { *(.debug_macro) } .debug_addr 0 : { *(.debug_addr) } .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) } .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) } /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) } } ================================================== attempt to open //usr/local/lib/arm-linux-gnueabihf/libmmal_core.so failed attempt to open //usr/local/lib/arm-linux-gnueabihf/libmmal_core.a failed attempt to open //lib/arm-linux-gnueabihf/libmmal_core.so failed attempt to open //lib/arm-linux-gnueabihf/libmmal_core.a failed attempt to open //usr/lib/arm-linux-gnueabihf/libmmal_core.so failed attempt to open //usr/lib/arm-linux-gnueabihf/libmmal_core.a failed attempt to open //usr/local/lib/libmmal_core.so failed attempt to open //usr/local/lib/libmmal_core.a failed attempt to open //lib/libmmal_core.so failed attempt to open //lib/libmmal_core.a failed attempt to open //usr/lib/libmmal_core.so failed attempt to open //usr/lib/libmmal_core.a failed attempt to open //usr/arm-linux-gnueabihf/lib/libmmal_core.so failed attempt to open //usr/arm-linux-gnueabihf/lib/libmmal_core.a failed ld: cannot find -lmmal_core
contents of /etc/ld.so.conf
:
include /etc/ld.so.conf.d/*.conf
contents of /etc/ld.so.conf.d
:
/etc/ld.so.conf.d/00-vmcs.conf /etc/ld.so.conf.d/arm-linux-gnueabihf.conf /etc/ld.so.conf.d/fakeroot-arm-linux-gnueabihf.conf /etc/ld.so.conf.d/libc.conf
contents of /etc/ld.so.conf.d/00-vmcs.conf
:
/opt/vc/lib
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by saen acro over 5 years ago
/usr/bin/ld: cannot find -lbcm_host
is Broadcom stuff missing,
are you crosscompile or make it on dev board itself?
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by andrei tanasescu over 5 years ago
compiling on the dev board itself.
the bcm_host
exists under the same location as the mmal libs:
ls -l /opt/vc/lib/ | grep bcm -rw-r--r-- 1 root root 99516 Apr 3 23:54 libbcm_host.so
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by saen acro over 5 years ago
AUTOBUILD_CONFIGURE_EXTRA='--prefix=/usr --includedir=${prefix}/include \
--mandir=${prefix}/share/man \
--infodir=${prefix}/share/info \
--sysconfdir=/etc --localstatedir=/var \
--disable-silent-rules --libexecdir=${prefix}/lib/tvheadend \
--disable-maintainer-mode \
--disable-dependency-tracking \
--enable-libffmpeg_static --enable-hdhomerun_static \
--enable-dvbcsa --enable-bundle' ./Autobuild.sh
is this work
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by andrei tanasescu over 5 years ago
saen acro wrote:
[...]
is this work
it fails when compiling libopus, but I don't use/need it. I only need x264 transcoding, hence the --enable-mmal
and --enable-omx
and all other codecs disabled in my auto build config.
CC src/transcoding/codec/codecs/libs/libopus.o src/transcoding/codec/codecs/libs/libopus.c:23:31: fatal error: opus/opus_defines.h: No such file or directory #include <opus/opus_defines.h> ^ compilation terminated. Makefile:713: recipe for target '/home/pi/app_sources/tvheadend/build.linux/src/transcoding/codec/codecs/libs/libopus.o' failed make[2]: *** [/home/pi/app_sources/tvheadend/build.linux/src/transcoding/codec/codecs/libs/libopus.o] Error 1 make[2]: Leaving directory '/home/pi/app_sources/tvheadend' debian/rules:15: recipe for target 'override_dh_auto_build' failed make[1]: *** [override_dh_auto_build] Error 2 make[1]: Leaving directory '/home/pi/app_sources/tvheadend' debian/rules:6: recipe for target 'build' failed make: *** [build] Error 2 dpkg-buildpackage: error: debian/rules build gave error exit status 2
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by saen acro over 5 years ago
Post result of
./configure
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by andrei tanasescu over 5 years ago
./configure --disable-libvpx --disable-libx265 --disable-libtheora --disable-libvorbis --disable-hdhomerun_client --disable-hdhomerun_static --disable-bintray_cache --enable-libffmpeg_static --enable-omx --enable-mmal --disable-libopus Checking support/features checking for cc execinfo.h ... ok checking for cc -mmmx ... fail checking for cc -msse2 ... fail checking for cc -Wunused-result ... ok checking for cc -fstack-protector ... ok checking for cc -fstack-protector-strong ... ok checking for cc -fstack-check ... ok checking for cc -fPIE ... ok checking for cc strlcat ... fail checking for cc strlcpy ... fail checking for cc fdatasync ... ok checking for cc getloadavg ... ok checking for cc atomic32 ... ok checking for cc atomic64 ... ok checking for cc atomic_time_t ... ok checking for cc atomic_ptr ... ok checking for cc bitops64 ... ok checking for cc lockowner ... ok checking for cc qsort_r ... ok checking for cc stime ... ok checking for cc gmtoff ... ok checking for cc recvmmsg ... ok checking for cc sendmmsg ... ok checking for cc libiconv ... fail ^ using build-in glibc iconv routines checking for cc ifnames ... ok checking for cc cclang_threadsan ... fail checking for py module gzip ... ok checking for pkg-config ... ok checking for xgettext ... ok checking for msgmerge ... ok checking for gzip ... ok checking for bzip2 ... ok checking for pkg openssl ... ok (detected 1.1.0j) checking for cc linux/dvb/version.h ... ok checking for pkg zlib ... ok (detected 1.2.8) checking for pkg libpcre2-8 ... ok (detected 10.22) checking for pkg liburiparser ... ok (detected 0.8.4) checking for pkg avahi-client ... ok (detected 0.6.32) checking for cc bcm_host.h ... ok checking for cc OMX_Core.h ... ok checking for pkg libva >=0.38.0 ... ok (detected 0.39.4) checking for pkg libva-x11 >=0.38.0 ... ok (detected 0.39.4) checking for pkg libva-drm >=0.38.0 ... ok (detected 0.39.4) checking for cc sys/inotify.h ... ok checking for cc inotify_init1 ... ok checking for cc dvbcsa/dvbcsa.h ... ok checking for cc -ldvbcsa ... ok fetching dvb-scan files ... ok checking for cc epoll_create1 ... ok checking for pkg dbus-1 ... ok (detected 1.10.26) Compiler: Using C compiler: cc Using C flags: -I/opt/vc/include/IL Using LD flags: -ldvbcsa Build for arch: arm Binaries: Using PYTHON: python Using GZIP: gzip Using BZIP2: bzip2 Options: pie yes ccdebug no cardclient yes cwc yes cccam yes capmt yes constcw yes linuxdvb yes satip_server yes satip_client yes hdhomerun_client no hdhomerun_static no iptv yes tsfile yes dvbscan yes timeshift yes trace yes avahi yes zlib yes libav yes ffmpeg_static yes libx264 yes libx264_static yes libx265 no libx265_static no libvpx no libvpx_static no libtheora no libtheora_static no libvorbis no libvorbis_static no libfdkaac no libfdkaac_static no libopus no libopus_static no nvenc no vaapi yes mmal yes omx yes inotify yes epoll yes pcre no pcre2 yes uriparser yes ccache no tvhcsa yes bundle no pngquant no kqueue no dbus_1 yes android no gtimer_check no slow_memoryinfo no libsystemd_daemon no pcloud_cache yes ddci yes cclang_threadsan no gperftools no execinfo yes W_unused_result yes f_stack_protector yes f_stack_protector_strong yes f_stack_check yes f_PIE yes fdatasync yes getloadavg yes atomic32 yes atomic64 yes atomic_time_t yes atomic_ptr yes bitops64 yes lockowner yes qsort_r yes stime yes gmtoff yes recvmmsg yes sendmmsg yes ifnames yes py_gzip yes bin_pkg_config yes bin_xgettext yes bin_msgmerge yes bin_gzip yes bin_bzip2 yes ssl yes linuxdvbapi yes linuxdvb_ca yes upnp yes omx_rpi yes hwaccels yes inotify_h yes inotify_init1 yes dvbcsa yes epoll_create1 yes mpegts yes mpegts_dvb yes Packages: openssl 1.1.0j zlib 1.2.8 libpcre2-8 10.22 liburiparser 0.8.4 avahi-client 0.6.32 libva 0.39.4 libva-x11 0.39.4 libva-drm 0.39.4 dbus-1 1.10.26 Installation paths: Prefix: /usr/local Binaries: ${prefix}/bin Libraries: ${prefix}/lib Data files: ${prefix}/share Man pages: ${datadir}/man Final Binary: /home/pi/app_sources/tvheadend/build.linux/tvheadend Tvheadend Data Directory: /usr/local/share/tvheadend
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by saen acro over 5 years ago
Output with your settings
./configure --disable-libvpx --disable-libx265 --disable-libtheora --disable-libvorbis --disable-hdhomerun_client --disable-hdhomerun_static --disable-bintray_cache --enable-libffmpeg_static --enable-omx --enable-mmal --disable-libopus
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by andrei tanasescu over 5 years ago
saen acro wrote:
Output with your settings
[...]
updated post above with my settings
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by saen acro over 5 years ago
when just
make -j$(nproc)
is there same errors?
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by andrei tanasescu over 5 years ago
saen acro wrote:
when just
[...]
is there same errors?
yes, its the same errors:
make -j$(nproc) make -f Makefile.webui LANGUAGES="ach ady ar bg cs da de en_US en_GB es et fa fi fr he hr hu it ko lv lt nl no pl pt ro ru sl sk sq sv tr uk zh zh-Hans" all make[1]: Entering directory '/home/pi/app_sources/tvheadend' make -f Makefile.webui WEBUI=std compile-std make[2]: Entering directory '/home/pi/app_sources/tvheadend' WEBUI std finished make[2]: Leaving directory '/home/pi/app_sources/tvheadend' make -f Makefile.webui WEBUI=debug compile-debug make[2]: Entering directory '/home/pi/app_sources/tvheadend' WEBUI debug finished make[2]: Leaving directory '/home/pi/app_sources/tvheadend' make[1]: Leaving directory '/home/pi/app_sources/tvheadend' CC timestamp.o CC tvheadend /usr/bin/ld: cannot find -lmmal_core /usr/bin/ld: cannot find -lmmal_util /usr/bin/ld: cannot find -lmmal_vc_client /usr/bin/ld: cannot find -lbcm_host collect2: error: ld returned 1 exit status Makefile:709: recipe for target '/home/pi/app_sources/tvheadend/build.linux/tvheadend' failed make: *** [/home/pi/app_sources/tvheadend/build.linux/tvheadend] Error 1
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by saen acro over 5 years ago
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by andrei tanasescu over 5 years ago
saen acro wrote:
Read this
https://stackoverflow.com/questions/16710047/usr-bin-ld-cannot-find-lnameofthelibrary
the solution that worked was to create symlinks to /usr/lib for the "missing" lib files:
sudo ln -s /opt/vc/lib/libmmal_core.so /usr/lib/libmmal_core.so sudo ln -s /opt/vc/lib/libmmal_util.so /usr/lib/libmmal_util.so sudo ln -s /opt/vc/lib/libmmal_vc_client.so /usr/lib/libmmal_vc_client.so sudo ln -s /opt/vc/lib/libbcm_host.so /usr/lib/libbcm_host.so
thanks for your time and suggestions!
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by saen acro about 5 years ago
Added OpenMax library dependency for ARM Developer boards
If some one know how to install mmal on clean armbian /no gui/ will add it to manual.
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by thermionic valve about 4 years ago
Many thanks for your build script!
Just to add, if "--enable-libsystemd_daemon" is desired, on Ubuntu 18.04 at least, libsystemd-dev needs to be installed
RE: [MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros - Added by saen acro about 4 years ago
thermionic valve wrote:
Many thanks for your build script!
Just to add, if "--enable-libsystemd_daemon" is desired, on Ubuntu 18.04 at least, libsystemd-dev needs to be installed
10х