Forums » Tutorial and setups »
[Solved] DVB-C: Prevent tvheadend from changing a single mux?
Added by Joern Heipmann almost 8 years ago
Hi all
I have successfully set up tvheadend as an SAT>IP Server (actually more correctly DVB-C>IP server) for a second tvheadend system. The system(s) successfully found 49 muxes of which 47 are successfully scanned for services. One other seems not to have any services, but with one of the muxes I have a problem.
Automatically generated was a mux with 410 MHz, symbol rate of 6900 k and a QAM64 modulation. This is according to my Samsung TV finding 4 services on this mux wrong. It should be 410Mhz, 6900 k and QAM 256. So it is expected that a scan of the mux for services ends with fail status.
No problem I thought, I changed the mux manually to QAM256, scanned again and the system finds the expected 4 services but then changes the mux back to QAM64. As the mux UID is saved in the service, I can not tune to the found services. Also, the next manual scan for the services leads to FAIL as result.
The relevant part of the tvheadend log looks like this:
2016-11-20 14:05:57.066 mpegts: 410MHz in upc - tuning on Sundtek DVB-C (III) : DVB-C #0
2016-11-20 14:05:59.166 subscription: 0004: "scan" subscribing to mux "410MHz", weight: 6, adapter: "Sundtek DVB-C (III) : DVB-C #0", network: "upc", service: "Raw PID Subscription"
2016-11-20 14:06:01.797 mpegts: mux 410MHz in upc changed from DVBC/ANNEX_A freq 410000000 sym 6900000 mod QAM/256 fec AUTO
2016-11-20 14:06:01.797 mpegts: mux 410MHz in upc changed to DVBC/ANNEX_A freq 410000000 sym 6900000 mod QAM/64 fec 3/5
2016-11-20 14:06:09.558 mpegts: 410MHz in upc scan complete
2016-11-20 14:06:09.558 subscription: 0004: "scan" unsubscribing
(This is from the tvheadend SAT>IP server)
So my questions: How can I prevent tvheadend from changing the mux or make it find the correct mux right from the beginning?
Thanks in advance
Kneip
Replies (4)
RE: DVB-C: Prevent tvheadend from changing a single mux? - Added by Mark Clarkstone almost 8 years ago
Change the Network discovery option to "New Muxes only".
RE: DVB-C: Prevent tvheadend from changing a single mux? - Added by Joern Heipmann almost 8 years ago
Thanks Mark.
Seems like that option is not yet available in my version, see attached screenshot.
I am currently running 4.0.9 on ubuntu by installing the stable version from the ppa. Which version should I use?
Also: I could switch of network discovery at all for this network in my release. Would this keep tvheadend from changing the mux? I would not mind if tvh would also not find any new muxes, as I have all technically possible ones in my list anyways.
Again, thanks for your effort.
Kneip
Bildschirmfoto 2016-11-20 um 15.21.22.png (59.1 KB) Bildschirmfoto 2016-11-20 um 15.21.22.png | Screen network option |
RE: DVB-C: Prevent tvheadend from changing a single mux? - Added by Mark Clarkstone almost 8 years ago
Joern Heipmann wrote:
Thanks Mark.
Seems like that option is not yet available in my version, see attached screenshot.
I am currently running 4.0.9 on ubuntu by installing the stable version from the ppa. Which version should I use?
Also: I could switch of network discovery at all for this network in my release. Would this keep tvheadend from changing the mux? I would not mind if tvh would also not find any new muxes, as I have all technically possible ones in my list anyways.
Yes, that would have the same effect, and you already know the downsides to doing this
Again, thanks for your effort.
Kneip
RE: DVB-C: Prevent tvheadend from changing a single mux? - Added by Joern Heipmann almost 8 years ago
OK, gave it a try and works now, so I finally gotten all available channels working, now it is only a matter of getting my family not to watch tv directly anymore
Thanks again, I will mark the topic as solved.
Kneip