Project

General

Profile

RPi3 / Tvheadend 4.1-2040 / sat>ip setup

Added by Oleg Junda over 8 years ago

Dear Friends,

try to setup sat>ip server, but after configuration, sat>ip clients in local network can not find / discover sat>ip server...:(

Please help.

Regards,
Oleg


Replies (6)

RE: RPi3 / Tvheadend 4.1-2040 / sat>ip setup - Added by Oleg Junda over 8 years ago

Raspbian Jessie, latest version...

RE: RPi3 / Tvheadend 4.1-2040 / sat>ip setup - Added by C vH over 8 years ago

normally it gets a problem if Tvh start and no network is avaible - raspbian shouldn't be that fast.
Could you post the config->network settings and the conf->general->satip server settings

RE: RPi3 / Tvheadend 4.1-2040 / sat>ip setup - Added by Oleg Junda over 8 years ago

Hi,

see attached pics..

Before RPi, I've setup Tvh on my Synology DS115. I can confirm, that on RPi tvh works much stable and faster, except of case with sat-ip...

Thanks for help.

BR,
Oleg

RE: RPi3 / Tvheadend 4.1-2040 / sat>ip setup - Added by C vH over 8 years ago

did you tried rtsp port 9983 ? the other stuff looks okay

RE: RPi3 / Tvheadend 4.1-2040 / sat>ip setup - Added by Oleg Junda over 8 years ago

Finally, I've found solution.

I started manually Tvheadend as root and it works:

sudo /etc/init.d/tvheadend stop
sudo /etc/init.d/tvheadend start

I am not 100% expert in Linux, so now I have to find the way how to do it during system start up.

Should be easier.. :)

Thanks.
BR,
Oleg

    (1-6/6)