Tvheadend

Sunny Sun wrote:

Hi everyone,
I have a Raspberry Pi and would like to use it with tvheadend. The following USB TV cards I have:

Bus 001 Device 005: ID 2040:6500 Hauppauge WinTV HVR-900
Bus 001 Device 006: ID 0ccd:0086 TerraTec Electronic GmbH Cinergy Hybrid XE

Unfortunately, these are set to DVB-T and not to DVB-C. How can they be converted to DVB-C? I have instructions found to make it through the terminal and not tvheadend but unfortunately without success. Can anyone help me?

Tvheadend displays the frontends as set by the driver.

If the driver supports it you need to set a modprobe option to tell it which delivery system you want.

What instructions are you referring to?

/KR sunny

How can I set a modprobe?

This is actually my setup

dmesg | grep DVB

[    5.140107] em28xx: DVB interface 0 found: isoc
[    5.380087] tveeprom 3-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
[    6.543292] DVB: registering new adapter (Trident TVMaster 6000 DVB-T)
[    6.543337] usb 1-1.4: DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[    7.396103] em2882/3 #0: Binding DVB extension
[    7.605734] DVB: registering new adapter (em2882/3 #0)
[    7.605758] usb 1-1.5: DVB: registering adapter 1 frontend 0 (Zarlink ZL10353 DVB-T)...
[    7.608202] em2882/3 #0: DVB extension successfully initialized

I've looked into those devices a bit more and as far as I can see neither of them support DVB-C..