Project

General

Profile

Forums » Tutorial and setups »

Openelec6, PCTV triplestick and DVB-T2

Added by Pel Dah almost 9 years ago

Hi,
I am not able to make TVH finding any mux for DVB-T2.
In config on TVH server I only see two muxes. DVB-C and DVB-T
I have tried all links that point to new fw files, but all files allready exist in default setup of openelec 6.
I my case I have HD channels on mux at 666mhz.
Se following info:
https://www.teracom.se/Sandarinformation/Frekvenstabeller/Detaljer/?ft=tv&sid=J

I have tried to add the mux manually but only gets fail during the scan.
It is just as the system do not know that the tuner is capable of recieving DVB-T2. Is there any command that needs to be running that makes it available also for scanning after DVB-T2 channels?

Best regards,
Pelle

Hej,
Jag får inte TVH att hitta mux för DVB-T2.
I configuration på TVH server listas bara 2 tuners. DVB-C samt DBV-T.
Alla länkar som pekar på div fw osv har jag kört och provat att ladda hem. Men samtliga fw-filer ligger redan installerade i openelec från början.
I mitt fall som går mot masten i Jönköping_bondberget skall HD kanalerna ligga på 666Mhz.
(https://www.teracom.se/Sandarinformation/Frekvenstabeller/Detaljer/?ft=tv&sid=J)
Jag har även provat att lägga upp den muxen manuellt, men får bara fail när jag scannar den.
Som om inte systemet vet att tunern stöder HD. Behöver jag köra något commando för att ställa in tunern att leta efter DVB-T2?

Tacksam för hjälp.

Med vänlig hälsning
Pelle


Replies (3)

RE: Openelec6, PCTV triplestick and DVB-T2 - Added by Mark Clarkstone almost 9 years ago

Make sure you're selecting the correct delivery system when adding the mux.

Without knowing the model number I can't say whether your device supports DVB-T2. The PCTV triplestick models that do support DVB-T2 are 290e & 292e.

RE: Openelec6, PCTV triplestick and DVB-T2 - Added by Pel Dah almost 9 years ago

Hi,
I have the latest 292e
I tried to setup as you described with DVB-T2 but still not able to find any services.
Here is a cut and paste from the log if that could say something more.

I use the version of TVH that is provided from the unoffical addon repo. Version 4.0.3

2015-12-22 15:51:30.000 mpegts: 666MHz in Digital - tuning on Silicon Labs Si2168 : DVB-T #0
2015-12-22 15:51:30.065 opentv-ausat: registering mux 666MHz in Digital
2015-12-22 15:51:30.067 subscription: 0012: "scan" subscribing to mux "666MHz", weight: 5, adapter: "Silicon Labs Si2168 : DVB-T #0", network: "Digital", service: "Raw PID Subscription"
2015-12-22 15:51:30.067 subscription: 0010: "epggrab" unsubscribing
2015-12-22 15:51:35.000 mpegts: 666MHz in Digital - scan no data, failed
2015-12-22 15:51:35.000 subscription: 0012: "scan" unsubscribing

RE: Openelec6, PCTV triplestick and DVB-T2 - Added by Mark Clarkstone almost 9 years ago

Pel Dah wrote:

Hi,
I have the latest 292e
I tried to setup as you described with DVB-T2 but still not able to find any services.
Here is a cut and paste from the log if that could say something more.

I use the version of TVH that is provided from the unoffical addon repo. Version 4.0.3

2015-12-22 15:51:30.000 mpegts: 666MHz in Digital - tuning on Silicon Labs Si2168 : DVB-T #0
2015-12-22 15:51:30.065 opentv-ausat: registering mux 666MHz in Digital
2015-12-22 15:51:30.067 subscription: 0012: "scan" subscribing to mux "666MHz", weight: 5, adapter: "Silicon Labs Si2168 : DVB-T #0", network: "Digital", service: "Raw PID Subscription"
2015-12-22 15:51:30.067 subscription: 0010: "epggrab" unsubscribing
2015-12-22 15:51:35.000 mpegts: 666MHz in Digital - scan no data, failed
2015-12-22 15:51:35.000 subscription: 0012: "scan" unsubscribing

You're not leaving most of the options as AUTO are you? Try entering the mux information exactly, Use AUTO as little as possible.

    (1-3/3)