Tvheadend

Hello I am wolf! (I'm going to assume that was a translation error but it made me laugh :p)

Add a new user to the Access Entries tab with the required permissions (check help before adding so you know what each one does), then add the same user to the passwords tab.

If you want people to have access without a username and password create a new user using * (asterisk) for both username & password. Anything you set for the catch all account will apply to additional accounts.

Access Entries example

Passwords example

Hello Mark,

Thank you for your help.

Yeah, me too I laughed. (WOLF)

He does not ask for a password.

But a second problem.

For example, there are 10 publications.
I'm watching one of the VLC.
Open a second VLC can not open a different box. Also the need to shutdown.

Can I monitor multiple programs at the same time?
How can I do this?

Best Regards

Selcuk Yilmaz wrote:

Hello Mark,

Thank you for your help.

Yeah, me too I laughed. (WOLF)

He does not ask for a password.

But a second problem.

For example, there are 10 publications.
I'm watching one of the VLC.
Open a second VLC can not open a different box. Also the need to shutdown.

Can I monitor multiple programs at the same time?
How can I do this?

Best Regards

You have a quad card you shouldn't have any issues watching more than one stream, what errors are you getting when you attempt to view (click the bar at the bottom when you attempt to tune).

Hello,

I can not open two publications simultaneously.

I open the other one off.

It writes in Subsections
2015-09-13 14: 52: 17,000 WebUI: Could not start streaming / stream / service / 7cf2fb8bed390f3ac22c49be317af009 No free adapter

Regards

Selcuk Yilmaz wrote:

Hello,

I can not open two publications simultaneously.

I open the other one off.

It writes in Subsections
2015-09-13 14: 52: 17,000 WebUI: Could not start streaming / stream / service / 7cf2fb8bed390f3ac22c49be317af009 No free adapter

Regards

Have you enabled the other 3 tuners & attached a network to them? :p

Hello,

No, just a tuner connected to the network.

Can I get a tuner and a channel frequency for example 4 or 5?
Some frequencies are 6 7 channels.
Or is it just a channel to each tuner can I get?

Selcuk Yilmaz wrote:

Hello,

No, just a tuner connected to the network.

Can I get a tuner and a channel frequency for example 4 or 5?
Some frequencies are 6 7 channels.
Or is it just a channel to each tuner can I get?

Its one mux per tuner. (You can view as many services as you want as long as they're on the same mux).

As long as your tuners have their own connection to the LNB you should be able to receive more than one mux but if you have split the one LNB connection you can only receive those in the same band/polarization.

Hello again

I want to open a second publication also gives the following error.
2015-09-13 15: 04: 53,000 subscription: 007B: "HTTP" unsubscribing, hostname = "192.168.0.19", client = "VLC / libvlc 2.2.1 / 2.2.1"

Regards

Yes, you're right, Mark.

I have one LNB. and a single cable.

I think I need a 4 LNBs and multi-switches.
4 Port Lnb To Multi Switch, Multi Switch to Tunner Card.

In this way I can get multiple streams at the same time at the same time?

Is it correct ?

Selcuk Yilmaz wrote:

Yes, you're right, Mark.

I have one LNB. and a single cable.

I think I need a 4 LNBs and multi-switches.
4 Port Lnb To Multi Switch, Multi Switch to Tunner Card.

In this way I can get multiple streams at the same time at the same time?

Is it correct ?

Yes, you'll need 4 cables/LNB to access separate band/polarizations.

After the 4 LNBs, for example, I make a stream 3 or 4 channels with tunner card ?

Regards

Hello Mark,

They all worked. (4x LNB) 4x Cable
Thank you

Selcuk Yilmaz wrote:

Hello Mark,

They all worked. (4x LNB) 4x Cable
Thank you

Glad to hear you got it working