Forums » Tutorial and setups »
SAT>IP with EyeTV Netstream 4Sat - initial setup
Added by Scott Hardin over 9 years ago
Could someone please provide the basics on setting up an EyeTV Netstream 4Sat via SAT>IP? I experimented around based on the wiki/forum/docs info, but there is minimal info on these devices for TVheadend since they are so new. I also tried a "Force Scan" in the "Networks" configuration, but that didn't work either.
Here is my current configuration:
- Software version:
HTS TVheadend 4.1-360~g0916e52
- Configuration -> DVB Inputs -> TV adapters:
EyeTV Netstream 4Sat is listed and first two tuners are enabled (I only have these connected to the LNB)
Replies (7)
RE: SAT>IP with EyeTV Netstream 4Sat - initial setup - Added by gary tan over 9 years ago
there's some posts regarding that device here if you didnt see them already
https://tvheadend.org/issues/3005#change-14552
btw in the tvheadend - tuner 1 pos 1 params screenshot you havent picked the netstream network you've set up
RE: SAT>IP with EyeTV Netstream 4Sat - initial setup - Added by Ian C about 9 years ago
Agree - you need to select the network in tuner 1 pos 1. If you then edit the network and select 28.2E Astra under 'pre-defined muxes' and then save, it will populate the muxes tab and start scanning. Unfortunately that's as far as I can get - it fails with 'scan no data, failed' for every mux. Let us know if you have more success!
RE: SAT>IP with EyeTV Netstream 4Sat - initial setup - Added by Ian C about 9 years ago
If you restart the tvheadend service and try scanning a mix again, you get this error:
2015-08-18 19:32:48.000 mpegts: 10729V in Freesat - tuning on SAT>IP DVB-S Tuner #1 (192.168.1.103)
2015-08-18 19:32:48.000 subscription: 0004: "scan" subscribing to mux "10729V", weight: 2, adapter: "SAT>IP DVB-S Tuner #1 (192.168.1.103)", network: "Freesat", service: "Raw PID Subscription"
2015-08-18 19:32:48.483 satip: SAT>IP DVB-S Tuner #1 (192.168.1.103) - RTSP SETUP error -5 (Input/output error) [6-403]
2015-08-18 19:32:58.000 mpegts: 10729V in Freesat - scan no data, failed
2015-08-18 19:32:58.000 subscription: 0004: "scan" unsubscribing
Anyone know what the RTSP SETUP error -5 (Input/output error) means? Is it related to bug 3005?
RE: SAT>IP with EyeTV Netstream 4Sat - initial setup - Added by andrew miller about 9 years ago
Hi there, I have brought one of these, did you ever have any luck getting this to work??
RE: SAT>IP with EyeTV Netstream 4Sat - initial setup - Added by nothing works over 3 years ago
Hello all,
was anyone ever able to make netstream 4sat work with TVHeadend?......
RE: SAT>IP with EyeTV Netstream 4Sat - initial setup - Added by saen acro over 3 years ago
Nuno Araujo wrote:
Hello all,
was anyone ever able to make netstream 4sat work with TVHeadend?......
My works. what is problem with yours?
RE: SAT>IP with EyeTV Netstream 4Sat - initial setup - Added by saen acro over 3 years ago
Your scenario is strange
describe more cabling connection and diseq switches
https://www.satlex.us/en/4participants-type_conf_4p_2s_quad.html
netstreamer have buildin diseq with MODE can be manipulated via android app