Debian 7.4 + Hauppauge 4000

Added by Dioni Rodriguez over 10 years ago

Hello

I am new to linux, Debian 7.4 wheezy.

I installed TVHeadend with my Hauppauge 4000 card and get to see the channels of DVB-T, but the DVB-S with the satellite Astra 19.2 lame can not get signal.

I do something wrong? DVBT works OK, DVB-S channels detected.

Greetings and thanks

Replies (4)

RE: Debian 7.4 + Hauppauge 4000 - Added by Raymond Paulsen over 10 years ago

Its a kernel bug in wheez with the firmware. Use backport kernel..

RE: Debian 7.4 + Hauppauge 4000 - Added by Dioni Rodriguez over 10 years ago

I forgive, I am newbie

Could you explain the solution? I have to use another Linux distribution?

regards

RE: Debian 7.4 + Hauppauge 4000 - Added by Raymond Paulsen over 10 years ago

Take a look in this thread: https://tvheadend.org/boards/5/topics/11224

i hade the same problem with a nova s2 card (same firmware as your card)
there is a link to a how to for adding backport to your wheezy. works good but use it at your own risk.

you can also use a ubuntu distribution with a later kernel, but iam a debian guy so i dont recomend that

RE: Debian 7.4 + Hauppauge 4000 - Added by Dioni Rodriguez over 10 years ago

I updated the kernel to 3.13 bpo but apparently still not working.

Kaffeine recognizes my DVB-T card, but the DVB-S is still missing.

In TVHeadend if CX24116/CX24118 appears, but the log returns "Front configuration failed - Bad file descriptor"

As I can see that the card is good for drivers?

(1-4/4)

Project

General

Profile

Tvheadend