Project

General

Profile

Forums » Kodi (XBMC) as frontend »

Raspberry Pi + XBMC (Openelec, Xbian or Raspbmc) = Black screen on all channels

Added by S W almost 12 years ago

Hi

There seems to be a bug with the Tvheadend XBMC PVR addon (prevalent on all raspberry pi XBMC distros) which results in a black screen/no picture when any channel is selected.
The problem has been discussed at length in the following forums but as yet no one has found a solution:

http://forum.xbmc.org/showthread.php?tid=148646&page=7
http://www.raspberrypi.org/phpBB3/viewtopic.php?f=35&t=23243

I thought I'd post a topic here just in case anyone has a fix for it?

Thanks


Replies (3)

RE: Raspberry Pi + XBMC (Openelec, Xbian or Raspbmc) = Black screen on all channels - Added by Enrico Milan almost 12 years ago

I have the same problem :

Log :
Reconnected to Tvheadend
Feb 17 15:20:19 epggrab: module opentv-skyit created
Feb 17 15:20:19 epggrab: module opentv-ausat created
Feb 17 15:20:19 epggrab: module opentv-skyuk created
Feb 17 15:20:19 epggrab: module pyepg created
Feb 17 15:20:19 epggrab: module xmltv created
Feb 17 15:20:20 epgdb: loaded v2
Feb 17 15:20:20 epgdb: channels 0
Feb 17 15:20:20 epgdb: brands 0
Feb 17 15:20:20 epgdb: seasons 0
Feb 17 15:20:20 epgdb: episodes 1968
Feb 17 15:20:20 epgdb: broadcasts 1968
Feb 17 15:20:20 dvr: Creating new configuration ''
Feb 17 15:20:20 dvr: Output directory for video recording is not yet configured for DVR configuration "". Defaulting to to "/home/tvheadend". This can be changed from the web user interface.
Feb 17 15:20:20 START: HTS Tvheadend version 3.3.465~g79c134f started, running as PID:2173 UID:1002 GID:1002, settings located in '/home/tvheadend/.hts/tvheadend'
Feb 17 15:20:21 AVAHI: Service 'Tvheadend' successfully established.
Feb 17 15:20:27 dvb: Adapter "Afatech AF9033 (DVB-T)" idle mux scanning set to: On
Feb 17 15:20:27 htsp: Got connection from 127.0.0.1
Feb 17 15:20:27 htsp: 127.0.0.1: Welcomed client software: XBMC Media Center (HTSPv6)

A) DVB-T HD = AverMedia A835 Green Volar HD
B) Mpeg2 Codec OK - License Insert in SO
C) SO = Xbian Linux in RaspBerry Pi Mod2
D) TvHeadend Server in RaspBerry Pi (localhost)
C) TVHeadend Service Client in XBMC RaspBerry PI (localhost : 127.0.0.1)

Scan Channels Ok. Istructions DMESG give me :
[ 12.797538] dvb-usb: found a 'AVerMedia AVerTV Volar HD/PRO (A835)' in cold state, will try to load a firmware
[ 14.122509] dvb-usb: downloading firmware from file 'dvb-usb-af9035-02.fw'
[ 14.459958] af9035: firmware version=11.5.9.0
[ 14.471188] dvb-usb: found a 'AVerMedia AVerTV Volar HD/PRO (A835)' in warm state.
[ 14.490245] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 14.507305] DVB: registering new adapter (AVerMedia AVerTV Volar HD/PRO (A835))
[ 14.520956] dvb-usb: MAC address: 00:00:00:00:00:00
[ 14.583217] af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
[ 14.595059] DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[ 14.625142] tda18218: NXP TDA18218HN successfully identified.
[ 14.633065] Registered IR keymap rc-empty
[ 14.655956] input: IR-receiver inside an USB DVB receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.3/rc/rc0/input0
[ 14.671207] rc0: IR-receiver inside an USB DVB receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.3/rc/rc0
[ 14.692565] dvb-usb: schedule remote query interval to 250 msecs.
[ 14.716446] dvb-usb: AVerMedia AVerTV Volar HD/PRO (A835) successfully initialized and connected.
[ 14.766632] usbcore: registered new interface driver dvb_usb_af9035

Driver = dvb-usb-af9035-02.fw

LOG TvHeadend :
Feb 17 15:35:34 subscription: "127.0.0.1 [ XBMC Media Center ]" subscribing on "Rete4", weight: 150, adapter: "Afatech AF9033 (DVB-T)", network: "Mediaset4", mux: "Mediaset4: 698,000 kHz", provider: "Mediaset", service: "Rete4", quality: 100
Feb 17 15:37:19 TS: Afatech AF9033 (DVB-T)/Mediaset4: 698,000 kHz/Rete4: Transport error indicator
Feb 17 15:37:19 TS: Afatech AF9033 (DVB-T)/Mediaset4: 698,000 kHz/Rete4: MPEG2VIDEO #1630: Continuity counter error
Feb 17 15:37:19 TS: Afatech AF9033 (DVB-T)/Mediaset4: 698,000 kHz/Rete4: MPEG2AUDIO #1632: Continuity counter error
Feb 17 15:37:19 TS: Afatech AF9033 (DVB-T)/Mediaset4: 698,000 kHz/Rete4: MPEG2AUDIO #1631: Continuity counter error
Feb 17 15:37:19 TS: Afatech AF9033 (DVB-T)/Mediaset4: 698,000 kHz/Rete4: TELETEXT #1619: Continuity counter error
Feb 17 15:40:46 htsp: 127.0.0.1 [ XBMC Media Center ]: Disconnected
Feb 17 15:40:46 subscription: "127.0.0.1 [ XBMC Media Center ]" unsubscribing from "Rete4"
Feb 17 15:40:46 htsp: 127.0.0.1 [ XBMC Media Center ]: Write error -- Broken pipe
Feb 17 15:40:54 htsp: Got connection from 127.0.0.1
Feb 17 15:40:54 htsp: 127.0.0.1: Welcomed client software: XBMC Media Center (HTSPv6)
Feb 17 15:40:54 subscription: "127.0.0.1 [ XBMC Media Center ]" subscribing on "Canale5", weight: 150, adapter: "Afatech AF9033 (DVB-T)", network: "Mediaset4", mux: "Mediaset4: 698,000 kHz", provider: "Mediaset", service: "Canale5", quality: 100
Feb 17 15:41:19 TS: Afatech AF9033 (DVB-T)/Mediaset4: 698,000 kHz/Canale5: Transport error indicator
Feb 17 15:41:19 TS: Afatech AF9033 (DVB-T)/Mediaset4: 698,000 kHz/Canale5: MPEG2VIDEO #1610: Continuity counter error
Feb 17 15:41:19 TS: Afatech AF9033 (DVB-T)/Mediaset4: 698,000 kHz/Canale5: TELETEXT #1619: Continuity counter error
Feb 17 15:41:19 TS: Afatech AF9033 (DVB-T)/Mediaset4: 698,000 kHz/Canale5: MPEG2AUDIO #1612: Continuity counter error
Feb 17 15:41:29 TS: Afatech AF9033 (DVB-T)/Mediaset4: 698,000 kHz/Canale5: Transport error indicator
Feb 17 15:41:29 TS: Afatech AF9033 (DVB-T)/Mediaset4: 698,000 kHz/Canale5: MPEG2VIDEO #1610: Continuity counter error
Feb 17 15:41:29 TS: Afatech AF9033 (DVB-T)/Mediaset4: 698,000 kHz/Canale5: MPEG2AUDIO #1612: Continuity counter error
Feb 17 15:41:29 TS: Afatech AF9033 (DVB-T)/Mediaset4: 698,000 kHz/Canale5: TELETEXT #1619: Continuity counter error
Feb 17 15:41:30 TS: Afatech AF9033 (DVB-T)/Mediaset4: 698,000 kHz/Canale5: Transport error indicator, 26 duplicate log lines suppressed
Feb 17 15:41:30 TS: Afatech AF9033 (DVB-T)/Mediaset4: 698,000 kHz/Canale5: MPEG2VIDEO @ #1610: Continuity counter error, 7 duplicate log lines suppressed

TVHEADEND - SERVER DVB :
Hardware
Device path:
/dev/dvb/adapter0
Device name:
Afatech AF9033 (DVB-T)
Host connection:
USB (480 Mbit/s)
Frequency range:
174000 kHz - 862000 kHz, in steps of 250 kHz
Status
Currently tuned to:
Mediaset4: 698,000 kHz
Services:
458
Muxes:
61
Muxes awaiting initial scan:
37
Signal Strength:
100%
Bit Error Rate:
93940/s
Uncorrected Bit Errors:
0/s

Any Idea?

RE: Raspberry Pi + XBMC (Openelec, Xbian or Raspbmc) = Black screen on all channels - Added by Enrico Milan almost 12 years ago

Add XBMC error Localhost:

23:44:01 T:2778178624 NOTICE: OMXClock using video as reference
23:44:01 T:2778178624 NOTICE: COMXPlayer::OnExit() deleting demuxer
23:44:01 T:2778178624 NOTICE: COMXPlayer::OnExit() deleting input stream
23:44:05 T:2778178624 ERROR: COMXCoreComponent::WaitForCommand OMX.broadcom.clock wait timeout event.eEvent 0x00000000 event.command 0x00000000 event.nData2 1
23:44:08 T:3042676736 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
23:44:08 T:3042676736 NOTICE: OMXClock using video as reference
23:44:10 T:3042676736 NOTICE: Previous line repeats 1 times.
23:44:10 T:3042676736 ERROR: COMXCoreComponent::WaitForCommand OMX.broadcom.image_fx wait timeout event.eEvent 0x00000000 event.command 0x00000000 event.nData2 2
23:44:10 T:3042676736 ERROR: COMXCoreComponent::SetStateForComponent - OMX.broadcom.video_scheduler failed with omx_err(0x80001000)
23:44:10 T:3042676736 ERROR: COMXCoreComponent::SetStateForComponent - OMX.broadcom.clock failed with omx_err(0x80001000)
23:44:12 T:3042676736 ERROR: Previous line repeats 1 times.
23:44:12 T:3042676736 NOTICE: COMXPlayer: Opening: pvr://channels/tv/Tutti i canali TV/0.pvr
23:44:12 T:3042676736 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
23:44:12 T:2778178624 NOTICE: Thread COMXPlayer start, auto delete: false
23:44:12 T:2778178624 NOTICE: Creating InputStream
23:44:12 T:2778178624 NOTICE: Creating Demuxer
23:44:12 T:2778178624 WARNING: CDVDMessageQueue(audio)::Put MSGQ_NOT_INITIALIZED
23:44:12 T:2778178624 WARNING: CDVDMessageQueue(video)::Put MSGQ_NOT_INITIALIZED
23:44:12 T:2778178624 NOTICE: Opening video stream: 0 source: 256
23:44:13 T:2778178624 NOTICE: OMXClock using video as reference
23:44:13 T:2778178624 NOTICE: Creating video thread
23:44:13 T:2740933696 NOTICE: Thread COMXPlayerVideo start, auto delete: false
23:44:13 T:2778178624 NOTICE: Opening audio stream: 1 source: 256
23:44:13 T:2778178624 NOTICE: Creating audio thread
23:44:13 T:2811733056 NOTICE: Thread COMXPlayerAudio start, auto delete: false
23:44:13 T:2778178624 NOTICE: Opening video stream: 0 source: 256
23:44:13 T:2778178624 NOTICE: OMXClock using video as reference
23:44:13 T:2778178624 NOTICE: Opening video stream: 0 source: 256
23:44:15 T:2778178624 ERROR: COMXCoreComponent::WaitForCommand OMX.broadcom.video_decode wait timeout event.eEvent 0x00000000 event.command 0x00000002 event.nData2 130
23:44:15 T:2778178624 ERROR: COMXCoreComponent::Initialize - error disable ports on component OMX.broadcom.video_decode omx_err(0x7fffffff)
23:44:15 T:2740933696 ERROR: COMXCoreComponent::SetParameter - OMX.broadcom.image_fx failed with omx_err(0x80001005)
23:44:15 T:2740933696 ERROR: COMXVideo::Decode - error OMX_IndexParamPortDefinition 2 omx_err(0x80001005)
23:44:15 T:2740933696 ERROR: COMXCoreComponent::SetParameter - OMX.broadcom.image_fx failed with omx_err(0x80001005)
23:44:15 T:2740933696 ERROR: COMXVideo::Decode - error OMX_IndexParamPortDefinition 3 omx_err(0x80001005)
23:44:15 T:2740933696 NOTICE: Display resolution ADJUST : 1280x720 @ 50.00 - Full Screen (24) (weight: 0.000)
23:44:17 T:2778178624 ERROR: COMXCoreComponent::WaitForCommand OMX.broadcom.video_scheduler wait timeout event.eEvent 0x00000000 event.command 0x00000000 event.nData2 2
23:44:17 T:2778178624 ERROR: COMXCoreComponent::Establish - Error setting state to idle OMX.broadcom.clock omx_err(0x7fffffff)
23:44:17 T:2778178624 ERROR: COMXVideo::Open m_omx_tunnel_clock.Establish
23:44:17 T:2778178624 ERROR: OMXPlayerVideo : Error open video output
23:44:17 T:2778178624 NOTICE: OMXClock using video as reference
23:44:17 T:2778178624 WARNING: OpenVideoStream - Unsupported stream 0. Stream disabled.
23:44:17 T:2778178624 NOTICE: Opening video stream: 0 source: 256
23:44:17 T:2778178624 NOTICE: Previous line repeats 5 times.
23:44:17 T:2778178624 NOTICE: Opening audio stream: 1 source: 256
23:44:17 T:3042676736 NOTICE: Using GL_TEXTURE_2D
23:44:17 T:3042676736 NOTICE: GL: Using BYPASS render method
23:44:17 T:3042676736 NOTICE: GL: GL_ARB_texture_rectangle not supported and OpenGL version is not 2.x
23:44:17 T:3042676736 NOTICE: GL: Reverting to POT textures
23:44:17 T:2811733056 NOTICE: OMXClock using audio as reference
23:44:17 T:2778178624 NOTICE: Opening audio stream: 1 source: 256
23:44:17 T:2778178624 NOTICE: Opening video stream: 0 source: 256

RE: Raspberry Pi + XBMC (Openelec, Xbian or Raspbmc) = Black screen on all channels - Added by Roland Rohde over 11 years ago

Same problem here.

The funny thing is that it worked perfectly in some of the older XBMc nightlies, but no longer worked in the newer nightlies or the Frodo final.
It also works fine on Android btw...so it's noa problem for the entire ARM platform...

Please fix this if at all possible, apart from this problem everything now works perfectly on Raspberry Pi with XBMC.

Thanks.

    (1-3/3)