Project

General

Profile

Forums » Descrambling »

capmt with oscam

Added by Stephan Oelze almost 12 years ago

Hi Forum!

I have a little trouble with capmt. newcamd works great but i do not really like it
cause of caid limitations per port.

The key is found by oscam but tvheadend does not really recognize it:

Oscam log an tvheadend log is atached to this post.
The Adapter is an sundtek dvb-S2 Stick.

So i think i have to use capmt_ca.so.
But where do i get this?
Or how could this be solved?

regards

oscam.log (25.2 KB) oscam.log
oscam.log (25.2 KB) oscam.log

Replies (6)

RE: capmt with oscam - Added by Stephan Oelze almost 12 years ago

https://github.com/tvheadend/tvheadend/pull/167

regarding to this i am missing the Oscam mode button :(

RE: capmt with oscam - Added by Stephan Oelze almost 12 years ago

After fixing some Brain errors i found out i have to compile from git
instead of using the Tarball.

Everything works fine now !!

git from 10 Minutes ago and oscam svn 7940

derdigge

RE: capmt with oscam - Added by Rob vh almost 12 years ago

Hmmm. I run with oscam 8024 (and got the same with 7940). I modified oscam.dvbapi as described (pmt_mode=4, request_mode=0, boxtype=pc).
I pulled tvheadend from git, ./configure and make. (no changes in the ./configure).
I disabled CWC and added a capmt (the Oscam button was there ;-).
When I play an encrypted channel I see in Oscam

2013/01/05 21:12:53 E02220 c dvbapi: Found 9 ECMpids and 1 STREAMpids in PMT
2013/01/05 21:12:53 E02220 c dvbapi: New program number: 0FAC (0500:0FAC unknown) [pmt_list_management 3]
2013/01/05 21:12:54 E02220 c dvbapi: Start descrambling PID #8 (CAID: 0100) 1
2013/01/05 21:12:54 E02220 c loopback (0100&00006A/5C00/0FAC/64:2EF9): found (304 ms) by omnikey-extra (P/2/2/2)
2013/01/05 21:12:54 E02220 c loopback (0100&00006A/5C00/0FAC/64:62B7): found (308 ms) by omnikey-extra (P/2/2/2)
2013/01/05 21:13:04 E02220 c dvbapi: [ADD PID 0] CAID: 0500 ECM_PID: 0590 PROVID: 042500
2013/01/05 21:13:04 E02220 c dvbapi: [ADD PID 1] CAID: 0500 ECM_PID: 057C PROVID: 042500
2013/01/05 21:13:04 E02220 c dvbapi: [ADD PID 2] CAID: 0100 ECM_PID: 0644 PROVID: 00006A
2013/01/05 21:13:04 E02220 c dvbapi: [ADD PID 3] CAID: 1819 ECM_PID: 0734 PROVID: 000000
2013/01/05 21:13:04 E02220 c dvbapi: [ADD PID 4] CAID: 0100 ECM_PID: 0734 PROVID: 00006D
2013/01/05 21:13:04 E02220 c dvbapi: [ADD PID 5] CAID: 1818 ECM_PID: 0720 PROVID: 000000
2013/01/05 21:13:04 E02220 c dvbapi: [ADD PID 6] CAID: 0100 ECM_PID: 0720 PROVID: 00006C
2013/01/05 21:13:04 E02220 c dvbapi: [ADD PID 7] CAID: 1817 ECM_PID: 070C PROVID: 000000
2013/01/05 21:13:04 E02220 c dvbapi: [ADD PID 8] CAID: 0100 ECM_PID: 070C PROVID: 00006A
2013/01/05 21:13:04 E02220 c dvbapi: Found 9 ECMpids and 1 STREAMpids in PMT
2013/01/05 21:13:04 E02220 c dvbapi: New program number: 0FAC (0500:0FAC unknown) [pmt_list_management 3]
2013/01/05 21:13:04 E02220 c dvbapi: Start descrambling PID #8 (CAID: 0100) 1
2013/01/05 21:13:04 E02220 c loopback (0100&00006A/5C00/0FAC/64:BB26): found (304 ms) by omnikey-extra (P/2/2/2)
2013/01/05 21:13:14 E02220 c loopback (0100&00006A/5C00/0FAC/64:89DB): found (304 ms) by omnikey-extra (P/2/2/2)
2013/01/05 21:13:17 E02220 c dvbapi: [ADD PID 0] CAID: 0500 ECM_PID: 0590 PROVID: 042500
2013/01/05 21:13:17 E02220 c dvbapi: [ADD PID 1] CAID: 0500 ECM_PID: 057C PROVID: 042500
2013/01/05 21:13:17 E02220 c dvbapi: [ADD PID 2] CAID: 0100 ECM_PID: 0644 PROVID: 00006A
2013/01/05 21:13:17 E02220 c dvbapi: [ADD PID 3] CAID: 1819 ECM_PID: 0734 PROVID: 000000
2013/01/05 21:13:17 E02220 c dvbapi: [ADD PID 4] CAID: 0100 ECM_PID: 0734 PROVID: 00006D
2013/01/05 21:13:17 E02220 c dvbapi: [ADD PID 5] CAID: 1818 ECM_PID: 0720 PROVID: 000000
2013/01/05 21:13:17 E02220 c dvbapi: [ADD PID 6] CAID: 0100 ECM_PID: 0720 PROVID: 00006C
2013/01/05 21:13:17 E02220 c dvbapi: [ADD PID 7] CAID: 1817 ECM_PID: 070C PROVID: 000000
2013/01/05 21:13:17 E02220 c dvbapi: [ADD PID 8] CAID: 0100 ECM_PID: 070C PROVID: 00006A
2013/01/05 21:13:17 E02220 c dvbapi: Found 9 ECMpids and 1 STREAMpids in PMT
2013/01/05 21:13:17 E02220 c dvbapi: New program number: 0FAC (0500:0FAC unknown) [pmt_list_management 3]
2013/01/05 21:13:17 E02220 c dvbapi: Start descrambling PID #8 (CAID: 0100) 1
2013/01/05 21:13:24 E02220 c loopback (0100&00006A/5C00/0FAC/64:CE94): found (303 ms) by omnikey-extra (P/2/2/2)

I have an oscam.dvbapi that ignores all but 0100:0000006A::

Oh, with CWC the same works like a charm. How did you get capmt going?

RE: capmt with oscam - Added by Stephan Oelze almost 12 years ago

you need to fill the camd.socket field.
In my Case its /tmp/camd.socket

RE: capmt with oscam - Added by Rob vh almost 12 years ago

Yes, I specified /tmp/camd.socket. The port left at 0 or set to 9000. Same result.
What does your oscam.dvbapi look like?

RE: capmt with oscam - Added by Stephan Oelze almost 12 years ago

oscam.dvbapi is not required so delete it at first.
In my oscam.conf:

[dvbapi]
enabled = 1
au = 1
boxtype = pc
user = tvh
pmt_mode = 4
request_mode = 1

i have specified 9000
which card do u have?

    (1-6/6)