Project

General

Profile

TBS-5580, Descrambling not working, failed to decode PMT

Added by Walter Holzer over 2 years ago

Hello!

I use a USB DVB-S2/S/S2X/T/T2/C/C2 Single-Tuner width CI USB Multituner TBS-5580.

Not scrambled Services works like a charm.

But when i open a Scrambled Service i get this message:

Feb 28 10:11:19 pitesttreeone tvheadend[25488]: en50221: failed to decode PMT
Feb 28 10:11:19 pitesttreeone tvheadend.tvheadend[25488]: 2022-02-28 10:11:19.381 [  ERROR] en50221: failed to decode PMT
Feb 28 10:11:20 pitesttreeone tvheadend[25488]: en50221: failed to decode PMT
Feb 28 10:11:20 pitesttreeone tvheadend.tvheadend[25488]: 2022-02-28 10:11:20.581 [  ERROR] en50221: failed to decode PMT
Feb 28 10:11:21 pitesttreeone tvheadend[25488]: TS: Liwest/586MHz/Kabel 1 Austria: H264 @ #217 Continuity counter error (total 1)
Feb 28 10:11:21 pitesttreeone tvheadend.tvheadend[25488]: 2022-02-28 10:11:21.564 [WARNING] TS: Liwest/586MHz/Kabel 1 Austria: H264 @ #217 Continuity counter error (total 1)

When i try:

dvblast -f 586000000 -s 6900000 -m qam_256 -a 0 -5 DVBC_ANNEX_A -U -c /home/$user/Downloads/dvb_channel.conf

#dvb_channel.conf
239.0.0.1:3001/[email protected] 1 20002

It also works like a charm!

I think it should be a problem with TVHeadend. I try severel CI and CI+ Modules. I habe full access to this Services with my cards.

Does anyone have any ideas what else I can test?

Thank you very much!

BR
Walter


Replies (6)

RE: TBS-5580, Descrambling not working, failed to decode PMT - Added by saen acro over 2 years ago

How is configured TVH?
Is CI enabled?
When CI plugged there must be some messages.

RE: TBS-5580, Descrambling not working, failed to decode PMT - Added by Walter Holzer over 2 years ago

When i insert the CI Modul:

Feb 28 14:14:24 pitesttreeone tvheadend[25488]: en50221: setting CI+ CAM data rate to 96 Mbps
Feb 28 14:14:24 pitesttreeone tvheadend.tvheadend[25488]: 2022-02-28 14:14:24.256 [   INFO] en50221: setting CI+ CAM data rate to 96 Mbps
Feb 28 14:14:24 pitesttreeone tvheadend[25488]: en50221: CAM slot 0: Application type: 01, manufacturer: 5300, Manufacturer code: 5b00
Feb 28 14:14:24 pitesttreeone tvheadend[25488]: en50221: CAM slot 0: Menu string: Conax CAM
Feb 28 14:14:24 pitesttreeone tvheadend.tvheadend[25488]: 2022-02-28 14:14:24.913 [   INFO] en50221: CAM slot 0: Application type: 01, manufacturer: 5300, Manufacturer code: 5b00
Feb 28 14:14:24 pitesttreeone tvheadend.tvheadend[25488]: 2022-02-28 14:14:24.914 [   INFO] en50221: CAM slot 0: Menu string: Conax CAM
Feb 28 14:14:25 pitesttreeone tvheadend[25488]: en50221: CAM slot 0 supported CAIDs:  0B00 (Conax)
Feb 28 14:14:25 pitesttreeone tvheadend.tvheadend[25488]: 2022-02-28 14:14:25.673 [   INFO] en50221: CAM slot 0 supported CAIDs:  0B00 (Conax)

Which Information did you mean with the question "How is configured TVH?"?

I would say, TVH recognizes the ci module correctly.

Unbenannt.png (24 KB) Unbenannt.png cimodulconfig
channel.png (16 KB) channel.png channelsetting

RE: TBS-5580, Descrambling not working, failed to decode PMT - Added by saen acro over 2 years ago


Disable frontends with you don't use.

RE: TBS-5580, Descrambling not working, failed to decode PMT - Added by Walter Holzer over 2 years ago

There are all disabled. Only DVB-C is enabled.

RE: TBS-5580, Descrambling not working, failed to decode PMT - Added by Walter Holzer over 2 years ago

Walter Holzer wrote:

There are all disabled. Only DVB-C is enabled.

RE: TBS-5580, Descrambling not working, failed to decode PMT - Added by Walter Holzer almost 2 years ago

Unfortunately not, i try so many possibilities but no one worked for me...

    (1-6/6)