Forums » Descrambling »
CCam how to enable this?
Added by Bob Blob over 6 years ago
Hi All
Just would like start this question thread as cant find simple answer for it. Have installed and running almost fine tvh server, one of the thing is that cant find CCcam section under CAs. Is there any way to enable it? Or how to compile tvh with this section fully accessible? Already did one but even CAs section wasnt visible at all.
Regards
Ra
Replies (18)
RE: CCam how to enable this? - Added by Mark Clarkstone over 6 years ago
If you don't see the CAs tab, change the view level for the user to expert, and/or change the default view level in the base config (Config -> General -> Base).
RE: CCam how to enable this? - Added by Bob Blob over 6 years ago
Hi
Thanks for reply.
How about if there is not visible CCcam option just newcamd?
Regards
Ra
RE: CCam how to enable this? - Added by Mark Clarkstone over 6 years ago
Bob Blob wrote:
Hi
Thanks for reply.
How about if there is not visible CCcam option just newcamd?Regards
Ra
Isn't that just dvbapi?
RE: CCam how to enable this? - Added by Bob Blob over 6 years ago
Not sure, presume its Oscam version intergrated somehow.
RE: CCam how to enable this? - Added by balanga bar over 6 years ago
Bob Blob wrote:
Hi All
Just would like start this question thread as cant find simple answer for it. Have installed and running almost fine tvh server, one of the thing is that cant find CCcam section under CAs. Is there any way to enable it? Or how to compile tvh with this section fully accessible? Already did one but even CAs section wasnt visible at all.
Regards
Ra
I've never figured out descrambling using cccam... I believe I need to run an OSCAM server but have no idea about how to confiure it. Is there a definitive guide anywhere?
RE: CCam how to enable this? - Added by Bob Blob over 6 years ago
Guideline how to set oscam server? Plenty of howtos.
RE: CCam how to enable this? - Added by balanga bar over 6 years ago
Bob Blob wrote:
Guideline how to set oscam server? Plenty of howtos.
They all seem to be related to Enigma. Is there anything specific to Tvheadend?
Getting cccam working on my Android decoder is very straightforward, but with Tvheadend it's very difficult.
RE: CCam how to enable this? - Added by balanga bar over 6 years ago
After following:-
https://tvheadend.org/boards/13/topics/6211
I manageded to set up OSCAM and log on, but got stuck at:-
now point your browser to http://ip-of-your-oscam-server:8888/ login, configure newcamd, add a user and add a reader (your cccam server). Finally configure TVheadend to connect to Oscam and you should be able to start watching encrypted TV channels.
Not sure how to configure newcamd, add a user and add a reader....
Any guidance would be appreciated.
RE: CCam how to enable this? - Added by Bob Blob over 6 years ago
In config upper tabs, set newcamd port, in oscam add user: tvhead with tvhead password or choose whatever you like. In tvheadend use those creditenials.
RE: CCam how to enable this? - Added by balanga bar over 6 years ago
Bob Blob wrote:
In config upper tabs, set newcamd port, in oscam add user: tvhead with tvhead password or choose whatever you like. In tvheadend use those creditenials.
I wish I understood any of that!
It seems that I need to configure oscam.conf oscam.user oscam.server correctly and then add a client via the Tvheadend GUI and know how each of the values interacts with other files.
In this post [https://tvheadend.org/boards/13/topics/13301] it says to use dvapi rather newcamd, but others have other views.
Wish someone would provide a definitive step by step (uptodate) guide on setting up Oscam on Tvheadend.... There are so many conflicting configurations.
RE: CCam how to enable this? - Added by Bob Blob over 6 years ago
Yes, pm me maybe we gonna organise TeamViewer sesion.
RE: CCam how to enable this? - Added by balanga bar over 6 years ago
Bob Blob wrote:
Yes, pm me maybe we gonna organise TeamViewer sesion.
What's TeamViewer?
RE: CCam how to enable this? - Added by balanga bar over 6 years ago
I've never used that.... and I'm running on Debian Linux.
I followed the instructions here - http://techblog.thomserve.co.uk/2016/07/26/how-to-integrate-oscam-with-tvheadend/
which are more recent than most and relatively simple. The log show there has been an initialisation from my service provider, but for some reason I get errors connecting to 192.160.0.10:2006. I don't know what this is or where it is set.
RE: CCam how to enable this? - Added by saen acro over 6 years ago
Describe step by step what you do and how you do it.
Every thing is simple when simple logic is used
RE: CCam how to enable this? - Added by balanga bar over 6 years ago
saen acro wrote:
Describe step by step what you do and how you do it.
Every thing is simple when simple logic is used
There are simply too many steps involved to accurately described what I did... but in outline terms, I installed Debian Linux (OpenVault version) http://openvault.com/
Installed Tvheaadend - not sure which instructions I followed but am running HTS Tvheadend 4.2.6-9~g12bff89b4
Installed Oscam using instructions here - http://www.streamboard.tv/wiki/OSCam/en
I'm running OSCam: 1.20-unstable_svn Build: r11425 Compiler: x86_64-linux-gnu
Followed the instructions here to integrate OScam with TVHeadend
http://techblog.thomserve.co.uk/2016/07/26/how-to-integrate-oscam-with-tvheadend/
oscam.user:-
[account] user = tvheadhend pwd = tvheadend monlevel = 4 group = 1 max_connections = 99
oscam.server:-
[reader] label = CCcam protocol = cccam device = MY-SERVICE_PROVIDER-HOSTNAME,MY-SERVICE_PROVIDER-PORT user = MY-USERID password = MY-PASSWORD group = 1 caid = 0100,0500,0604,1810,1802,1880 cccversion= 1.2.3 cccbuild = 4567
oscam.conf:-
[global] logfile = /var/log/oscam/oscam.log nice = -1 usrfile = /var/log/oscam/oscamuser.log cwlogdir = /var/log/oscam/cw [anticasc] enabled = 1 numusers = 1 samples = 5 penalty = 1 aclogfile = /var/log/oscam/aclog.log denysamples = 4 [cache] [cs378x] port = 30000@0100:FFFFFF;30001@0200:FFF000,FFFF00;30002@0300:FFFFFF [newcamd] port = 10000@0100:FFFFFF;10001@0200:FFF000,FFFF00;10002@0300:FFFFFF key = 000102030405060708090A0B0C0D [radegast] port = 20000 allowed = 192.168.0.0-192.168.255.255 user = user1 [serial] device = user2@/dev/ttyS0?delay=1&timeout=300;[email protected],2006?delay=1&timeout=5000 [gbox] port = 50000 hostname = host.example.com my_password = AB1122C1 [cccam] port = MY-SERVICE_PROVIDER-PORT nodeid = F37EA75D10CD1586 version = 2.0.11 reshare = 2 [dvbapi] enabled = 1 pmt_mode = 0 listen_port = 9001 ecminfo_type = 4 user = tvheadhend read_sdt = 1 boxtype = pc [monitor] port = 988 aulow = 120 monlevel = 1 [webif] httpport = 8888 httpuser = root httppwd = password httpallowed = 127.0.0.1,192.168.1.0-192.168.255.255,255.255.255.255 aulow = 120
Having spent many hours trying various things to try and get this working, I may have omitted various additional steps.
One thing I can't figure out is why does my /var/log/oscam.log show attempts to try and connect to 192.160.0.10:2006
RE: CCam how to enable this? - Added by saen acro over 6 years ago
Fallow logic of connection
Oscam C-line port
oscam.conf
[cccam] port = 12345
rest is not needed
next create user
oscam.user
[account] user = tvheadhend pwd = tvheadend group = 1
group need to be same as reader used to connect to service provider or local card reader
add client in TVH connecting to ip of oscam with port 12345
for beginners use web-ui of oscam don't be so hackers
RE: CCam how to enable this? - Added by balanga bar over 6 years ago
Many thanks for this!!!!
I was mixing up the port with the port I used for connecting to my service provider.
I have it working now.... sort of... maybe I'm missing some encryption algorithms. Are they specified by CAID?