Forums » Descrambling »
TVH read the wrong CAIDS from DVB-C
Added by Ping Lee over 7 years ago
hello:
I have a problem, I install the TVH on UBUNTU 16.04.2,
In the DVB-C signal,have a CAID is "4A30@000000",my oscam can read this CAID on card. but the TVH read the CAID"4A30@000009",so it can not Descrambling the channel。
I can be sure that OSCAM is OK,and the right CAID is "4A30@000000",Because I use the MUMUDVB can work,and descrambing the channel with the CAID "4A30@000000".
waiting for help
and I open MY server alway,everyone can try it,*I have 2 PC run oscam and TVH.*
PC1:
OSCAM http://218.70.86.30:8888 admin/admin
SSH 218.70.86.30:221 sky/lp0828
PC2:
OSCAM http://218.70.86.30:8882 admin/admin
TVH http://218.70.86.30:9981
SSH 218.70.86.30:222 sky/lp0828
Replies (11)
RE: TVH read the wrong CAIDS from DVB-C - Added by saen acro over 7 years ago
Are you sure that card is active?
AU in your config is disabled
RE: TVH read the wrong CAIDS from DVB-C - Added by Ping Lee over 7 years ago
yes,I can be sure. All my other devices can connect oscam to decrypt the channel.onlyTVH can not work.
If you have idea.please try to set the tvh or oscam. this system is build for everyone test. thinS
RE: TVH read the wrong CAIDS from DVB-C - Added by saen acro over 7 years ago
https://tvheadend.org/boards/4/topics/24116
Test with latest github
I test your system but your oscam is some "patched" version
maybe there is some limitation.
Even dvbapi do not communicate with oscam.
p.s.
4A30:000000 include 4A30:000009
RE: TVH read the wrong CAIDS from DVB-C - Added by Joe User over 7 years ago
Need logs of tvheadend and oscam (-d 128 ) to see what is happening.
RE: TVH read the wrong CAIDS from DVB-C - Added by saen acro over 7 years ago
Person give full access log what you want.
Only signal of this DVB-C is too much amplified there is too much errors
p.s.
Never ever use public ip behind NAT 20.x.x.x is not for private addressing
https://en.wikipedia.org/wiki/Private_network
RE: TVH read the wrong CAIDS from DVB-C - Added by Ping Lee over 7 years ago
saen acro wrote:
https://tvheadend.org/boards/4/topics/24116
Test with latest github
I test your system but your oscam is some "patched" version
maybe there is some limitation.
Even dvbapi do not communicate with oscam.p.s.
4A30:000000 include 4A30:000009
The CAID here is 4A30,So I can only use this version of OSACM。The original version of OSCAM does not support our CAID。But I can confirm that OSCAM is normal and that all other clients can decrypt the channel properly。
You can SSH my server, check and check the version. Thanks
RE: TVH read the wrong CAIDS from DVB-C - Added by Ping Lee over 7 years ago
saen acro wrote:
Person give full access log what you want.
Only signal of this DVB-C is too much amplified there is too much errorsp.s.
Never ever use public ip behind NAT 20.x.x.x is not for private addressing
https://en.wikipedia.org/wiki/Private_network
Well, this is a test environment, and other private addressing are occupied, so no attention is paid to it...
RE: TVH read the wrong CAIDS from DVB-C - Added by Ping Lee over 7 years ago
Joe User wrote:
Need logs of tvheadend and oscam (-d 128 ) to see what is happening.
please SSH my server 。thinks!
RE: TVH read the wrong CAIDS from DVB-C - Added by saen acro over 7 years ago
There is a problem on PC with TVH installed.
TVH must start as service but it cannot .
As I see you started it manually that why descrambling not work
reinstall OS, your HP T5740 Thin Client BIOS update is recommended also.
currently latest git version of TVH installed.
RE: TVH read the wrong CAIDS from DVB-C - Added by Ping Lee over 7 years ago
I deleted TVH's service,But I don't think that should be the problem, because I can decrypt the channel properly with the CAID "0939" card.
Only CAID 4A30 is not possible, but at first it is possible. I put OSCAM's card reader 2, set CAID 0939, you can enable it to test.
Because my CAID 0939 is about to stop using, so I will use CAID 4a30 only
RE: TVH read the wrong CAIDS from DVB-C - Added by saen acro over 7 years ago
TVH do not send any kind of ECM for descrambling to Oscam
Do not understand why you delete tvh service, after any restart you should start it manually. out of logic.
When i try to run manually TVH on my PC it cannot descramble also.