Descrambling not working...

Hi!

- TvHeadend git-9d775da
 - NewCs 1.67 RC1
 - OmniKey cardreader
 - IPTV multicast UDP over RTP h264, HE-AAC - Conax CAS5

TvHeadend connects to NewCs, but can not descramble channels.
 This used to work.

Anybody got any ideas?

See logs + config in .zip.

Attached: zip with tvheadend.log, newCs.log, newcs.xml, channel config and 20 sec tcpdump (tcpdump -w nrk1.cap -nnvvX -s 0 -i eth0 host 233.171.129.100 and port 5500).

Regards, Anders

nrk1.zip (14.1 MB) nrk1.zip

Replies (4)

RE: Descrambling not working... - Added by Anders R about 13 years ago

Changed newcs for oscam; still no go.
Oscam sees all my entitlements, communication tvheadend/oscam -> ok

oscam.log:
-----------------------

2011/08/17 12:24:56 8AC1650 r [conax-reader] ready for requests
2011/08/17 12:24:57 0 s init for all local cards done
2011/08/17 12:24:57 0 s anti cascading disabled
2011/08/17 12:25:51 8AC4050 c client connected to 15050 port
2011/08/17 12:25:51 8AC4050 c encrypted newcamd:15050-client 10.0.0.103 granted (tvheadend, au=on (1 reader))
2011/08/17 12:25:51 8AC4050 c user tvheadend authenticated successfully (Tvhead end)
2011/08/17 12:25:51 8AC4050 c AU enabled for user tvheadend on reader omnikey
2011/08/17 12:58:46 8AC1650 r Error processing ecm for caid 0B04, srvid 0000 (s ervicename: ) on reader omnikey.
2011/08/17 12:58:46 8AC4050 c tvheadend (0B04&000000/0000/6F:181D): not found ( 228 ms) by omnikey (of 1 avail 1)
2011/08/17 12:58:48 8AC4050 c tvheadend (0B04&000000/0000/6F:181D): not found ( 0 ms) by omnikey (of 1 avail 1)

Tvheadend debug:
------------------------

[DEBUG]:cwc: eth0/233.171.129.100 using CWC 10.0.0.102:15050
[INFO]:subscription: "HTTP" subscribing on "test-nrk1", weight: 150, adapter: "eth0", network: "<N/A>", mux: "233.171.129.100", provider: "<N/A>", service: "<N/A>", quality: 100
[DEBUG]:Service: eth0/233.171.129.100: Status changed to [Hardware input]
[DEBUG]:Service: eth0/233.171.129.100: Status changed to [Hardware input] [Input on service]
[DEBUG]:Service: eth0/233.171.129.100: Status changed to [Hardware input] [Input on service] [Demuxed packets]
[DEBUG]:cwc: Sending ECM section=0/0, for service (null) (seqno: 92) PID 7576
[DEBUG]:cwc: Received NOK for service "(null)" (seqno: 92 Req delay: 1 ms)
[ERROR]:cwc: Can not descramble service "(null)", access denied (seqno: 92 Req delay: 1 ms)
[DEBUG]:Service: eth0/233.171.129.100: Status changed to [Hardware input] [Input on service] [Demuxed packets] [No access]
[DEBUG]:Service: eth0/233.171.129.100: Status changed to [Hardware input] [Input on service] [Demuxed packets] [Reassembled packets] [No access]
[INFO]:subscription: "HTTP" unsubscribing from "test-nrk1"
--------------------------

Does anybody have any ideas?

Regards Anders.

RE: Descrambling not working... - Added by MrRepel Joooow about 13 years ago

Do you have your CAID correct in the newcamd section ? It seems that the id isnt found. I also cant find the ID 0B04&000000 for a provider.

011/08/17 12:58:46 8AC4050 c tvheadend (0B04&000000/0000/6F:181D): not found ( 228 ms) by omnikey (of 1 avail 1)

If you look in readers -> entitlements you see the CAID. You have to add this to the newcamd section (oscam.conf) like

port = 34000@0100:00006A

This is for a dutch canaaldigitaal card. the newcamd port used here is 34000.

RE: Descrambling not working... - Added by Anders R about 13 years ago

The CAID is correct, 0B04. It's a Norwegian IPTV provider.

This used to work (tvhe + newcs), but suddenly stopped.

My oscam config is in http://www.lonelycoder.com/redmine/boards/13/topics/1733 - I think (?) it's all correct... :-=

I'm really at a loss here.. :-(

Regards,
Anders

RE: Descrambling not working... - Added by Anders R about 13 years ago

Still no luck here.
Is anybody able to give me a pointer?

Config etc: http://www.lonelycoder.com/redmine/boards/13/topics/1733

Regards,
Anders

(1-4/4)

Project

General

Profile

Tvheadend