Bug #5858
Some services are hidden when hide: "parent disabled" option selected, but there's no reason for it (no mux, no network disabled)
0%
Description
I have HTS Tvheadend 4.3-1857~g221c29b40 in docker container build by linuxserver.io. Its running on Pi4 1GB inside LibreElec 9.2.
After installation I've added a network, selected predefined muxes (all-Czech republic). Asigned tuner to network and let it scan.
There is 80 muxes (none disabled, none hidden by "parent disabled" selection).
About 10 services is "scan result: ok", services found. Rest is "scan result: failed" (normal result so far)
Some of the services however are marked as "parent disabled", so they are hidden in default services view.
If I select hide:none, they are shown.
I guess this services are evaluated wrong as "parent disabled".
Consequences:
These services are ignored by automatic mapper.
These services cannot be played, result in a log:
2020-02-16 19:47:55.761 http: 192.168.4.96: using ticket 0b235dd4e4ab91d767ecf3bb5394bdb87d0b0d3f for /stream/service/1f876f1a618c1a656bdb4d98059ddb3d 2020-02-16 19:47:57.761 subscription: 0131: No input source available for subscription "HTTP" to service "cz/594MHz/CT 1 HD T2" in mux "594MHz in cz" 2020-02-16 19:47:57.761 webui: Couldn't start streaming /stream/service/1f876f1a618c1a656bdb4d98059ddb3d?ticket=0b235dd4e4ab91d767ecf3bb5394bdb87d0b0d3f, No service enabled
In HTS Tvheadend v. 4.2... running as a native Libreelec addon there's no such problem.
History
Updated by g siviero almost 5 years ago
I also have a similar problem, a similar issue (Bug #4929) should already be open.
At the moment my workaround is to (temporarily) reduce the value "Maximum PIDs" from configuration-> DVB Inputs -> TV Adapters and rescan the frequencies.
Reduce to which value? Until the scan shows correctly all missing services.
Updated by Petr D. almost 5 years ago
Thanks for the hint! It worked, I've decreased max PID value somewhere to 26 and now it works.
Updated by D B over 3 years ago
This is still an issue.
I had to decreased my PID from 32 > 20 to stop weird behavior, services not mapping and 'parent disabled'
Updated by D B over 3 years ago
The PID i think is a red herring.
It seems to randomly decide when a service parent is hidden and therefore mappable.
I seem to get more success from restarts and re-scanning than I do any of the settings. Plenty still unavailable to map
Updated by Tom N about 2 years ago
Just wanted to say that the problem still persist...
- Raspberry Pi Zero WH with TV HAT Sony CXD2880, HTS Tvheadend 4.3-x
- I was decreasing my PID from 32 gradually by 1 to 10 - didn't help at all
- I was not able to map Czech Tv multiplex at 514 Mhz
- Also no matter what, scanning stops at 91%
- Any advice? Thanks in advance...
- The only solution for me was to revert to 4.2.8 tvheadend (buster)