Project

General

Profile

Bug #5598

MAX S8 Quattro LNB's

Added by Mark Lee over 5 years ago. Updated over 4 years ago.

Status:
Invalid
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
2019-04-11
Due date:
% Done:

0%

Estimated time:
Found in version:
4.0.9-16~g63c1034~trusty
Affected Versions:

Description

anyone had the luck to configure the Quattro LNB with Digital Devices MAX S8 ?
i have used fmode=2
however no luck
any other configuration needs to be taken care of ?

History

#1

Updated by Volker Schmidt over 5 years ago

Mark Lee wrote:

i have used fmode=2

Personally no. Used - a while ago - the Max S8 with "fmode=3" (Unicable). That worked OK.

You have really a "cascade of multiswitches"? Per [[http://support.digital-devices.eu/index.php?article=152]] (bottom part).

#2

Updated by Mark Lee over 5 years ago

Volker Schmidt wrote:

Mark Lee wrote:

i have used fmode=2

Personally no. Used - a while ago - the Max S8 with "fmode=3" (Unicable). That worked OK.

You have really a "cascade of multiswitches"? Per [[http://support.digital-devices.eu/index.php?article=152]] (bottom part).

yes followed, i have the Quattro LNB connected directly to the card
in the SatConfig: should i keep it as Universal or Use Advanced ?

#3

Updated by Volker Schmidt over 5 years ago

In my setup I used "Universal".

#4

Updated by Flole Systems over 4 years ago

  • Status changed from New to Invalid

Also available in: Atom PDF