Bug #5231
SAT>IP broken after FRITZ!Box 6490 Firmware Update v7
0%
Description
Hi,
after my AVM FRITZ!Box 6490 got updated to Firmware v7, SAT>IP seems to be broken.
As a new feature, the Manufacturer now lists official SAT>IP support.
I get a lot of these RTSP Errors after the Update:
2018-09-30 21:13:51.037 satip: SAT>IP DVB-C Tuner #4 (192.168.1.2) - RTSP cmd error 7 (Unbekannter Fehler -7) [8-408]
2018-09-30 21:13:55.919 mpegts: 522MHz in Vodafone - scan no data, failed
2018-09-30 21:13:55.919 subscription: 003A: "scan" unsubscribing
...
2018-09-30 21:14:00.917 satip: SAT>IP DVB-C Tuner #2 (192.168.1.2) - RTSP cmd error 7 (Unbekannter Fehler -7) [8-408]
2018-09-30 21:14:02.802 subscription: 003C: service instance is bad, reason: Tuning failed
What can I do to help resolve this Issue?
Regards
Daniel
Files
History
Updated by Mischa Mischock about 6 years ago
Enable "pass specinv" in tuner configurations.
Reboot
Updated by Mischa Mischock about 6 years ago
Mischa Mischock wrote:
Enable "pass specinv" in tuner configurations.
Reboot
And make a trace log
Updated by Daniel Wandrei about 6 years ago
Mischa Mischock wrote:
Enable "pass specinv" in tuner configurations.
Reboot
Thank you very much, that seemed to solve the Problem. Will proof check later on Kodi.
Updated by Daniel Wandrei about 6 years ago
Mischa Mischock wrote:
Mischa Mischock wrote:
Enable "pass specinv" in tuner configurations.
RebootAnd make a trace log
Here we go...
Updated by Stefan Dietzel about 6 years ago
- File Bildschirmfoto 2018-10-03 um 21.25.15.png Bildschirmfoto 2018-10-03 um 21.25.15.png added
- File Bildschirmfoto 2018-10-03 um 21.26.34.png Bildschirmfoto 2018-10-03 um 21.26.34.png added
I still get same error when using FritzOS 7 with Fritzbox 6490 Cable:
2018-10-03 21:20:44.509 mpegts: 394MHz in Unitymedia - tuning on SAT>IP DVB-C Tuner #1 (192.168.0.1@UDP)
2018-10-03 21:20:44.509 subscription: 0067: "HTTP" subscribing on channel "RTL Television", weight: 100, adapter: "SAT>IP DVB-C Tuner #1 (192.168.0.1@UDP)", network: "Unitymedia", mux: "394MHz", provider: "Unitymedia", service: "RTL Television", profile="h265_handy", hostname="5.146.162.191", username="handy", client="TvhClient/862 LibVLC/3.0.4"
2018-10-03 21:20:44.645 satip: SAT>IP DVB-C Tuner #1 (192.168.0.1@UDP) - RTSP cmd error 7 (Unbekannter Fehler -7) [8-408]
2018-10-03 21:20:46.509 subscription: 0067: service instance is bad, reason: Tuning failed
Updated by Daniel Wandrei about 6 years ago
It's working fine for me. Maybe you want to check your settings to see any differences (see attached screenshot).
Updated by Stephan Voeth about 6 years ago
- File Bildschirmfoto vom 2018-10-07 15-20-10.png Bildschirmfoto vom 2018-10-07 15-20-10.png added
- File Bildschirmfoto vom 2018-10-07 15-19-57.png Bildschirmfoto vom 2018-10-07 15-19-57.png added
- File Bildschirmfoto vom 2018-10-07 15-19-45.png Bildschirmfoto vom 2018-10-07 15-19-45.png added
- File Bildschirmfoto vom 2018-10-07 15-19-01.png Bildschirmfoto vom 2018-10-07 15-19-01.png added
I finally solved it for me
Setting "pass specinv" to "do not use" in tuner config solved it for me ("off" or "on" both did not work and created the above mentioned 4-408 error).
My resolving config is in the pictures below.
Systemconfig:
Debian 9.0 (stretch, Kernel 4.9.0-8-amd64) in KVM-VM on Debian 9 Host with Tvheadend (unstable 4.3-1424) and 4 virtual NICs and FritzBox 6490 (FritzOS 7)
Updated by Jaroslav Kysela about 6 years ago
Thanks. I reverted the change. Note that this option should be 'do not use' by default now.
Updated by Tom Bauer almost 6 years ago
I also have this problem since updating the firmware version 7 but the problem is that I canĀ“t find the parameter "pass specinv" in my settings (see attached file).
I am using the version 4.4.20180726. Can somebody help me here, thank you!
Updated by Tom Bauer almost 6 years ago
And I am using on a Synology DS218+, so far a release from dierkse