Bug #5170
Need help to scan channels
0%
Description
i Have Moi Pro V
with 5 octa TBS6909 dvb-s/s2
1 octa TBS6209 DVB-C
Quattro LNB v/l h/l v/h h/h
Diseqc Multiswitch DMS 17/32
connected to
Poort A = 28.2E : Astra 2A/2C/2E/2F/Eutelsat 28A
Poort B = 19.2E : Astra 1KR/1L/1M/1N
Poort C = 23.5E : Astra 3B
Poort D = 13E : Eutelsat Hot Bird 13B/13C/13D
/etc/modprobe.d/mxl58x.conf
options mxl58x mode=0 (according tbs6909_user_guide.pdf)
i cant scan all channels from satelite with tvheadend (missing a lots of channels)
i think this has to do with dvblast (what i dont understand)
and its not switching with diseq maybe
please help me
History
Updated by
Updated by Ashok Jagesar over 6 years ago
Updated by saen acro wrote:
What "drivers" you use?
09:00.0 Multimedia controller: Device 544d:6178
Subsystem: Device 6909:0001
Physical Slot: 0-2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 67
Region 0: Memory at fb300000 (32-bit, non-prefetchable) [size=256K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00798 Data: 0000
Capabilities: [90] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s unlimited, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: TBSECP3 driver
Updated by saen acro over 6 years ago
Ashok Jagesar wrote:
Kernel driver in use: TBSECP3 driver
modinfo tbsecp3
Updated by Ashok Jagesar over 6 years ago
[root@Server ~]# modinfo tbsecp3
filename: /lib/modules/4.4.112-1.el7.elrepo.x86_64/kernel/drivers/media/pci/tbsecp3/tbsecp3.ko
license: GPL
description: TBS ECP3 driver
author: Luis Alves <[email protected]>
srcversion: 533BB7E5866E52F63B9ACCB
alias: pci:v0000544Dd00006178sv00006304sd*bc*sc*i*
alias: pci:v0000544Dd00006178sv00006301sd*bc*sc*i*
alias: pci:v0000544Dd00006178sv0000690Asd*bc*sc*i*
alias: pci:v0000544Dd00006178sv00006514sd*bc*sc*i*
alias: pci:v0000544Dd00006178sv00006814sd*bc*sc*i*
alias: pci:v0000544Dd00006178sv00006209sd*bc*sc*i*
alias: pci:v0000544Dd00006178sv00006704sd*bc*sc*i*
alias: pci:v0000544Dd00006178sv00006281sd*bc*sc*i*
alias: pci:v0000544Dd00006178sv00006290sd*bc*sc*i*
alias: pci:v0000544Dd00006178sv00006590sd*bc*sc*i*
alias: pci:v0000544Dd00006178sv00006528sd*bc*sc*i*
alias: pci:v0000544Dd00006178sv00006910sd*bc*sc*i*
alias: pci:v0000544Dd00006178sv00006909sd*bc*sc*i*
alias: pci:v0000544Dd00006178sv00006908sd*bc*sc*i*
alias: pci:v0000544Dd00006178sv00006905sd*bc*sc*i*
alias: pci:v0000544Dd00006178sv00006904sd*bc*sc*i*
alias: pci:v0000544Dd00006178sv00006903sd*bc*sc*i*
alias: pci:v0000544Dd00006178sv00006902sd*bc*sc*i*
alias: pci:v0000544Dd00006178sv00006522sd*bc*sc*i*
alias: pci:v0000544Dd00006178sv00006205sd*bc*sc*i*
depends: dvb-core,tas2101
vermagic: 4.4.112-1.el7.elrepo.x86_64 SMP mod_unload modversions
parm: adapter_nr:DVB adapter numbers (array of short)
parm: dma_pkts:DMA buffer size in TS packets (16-256), default 128 (array of int)
parm: enable_msi:use an msi interrupt if available (bool)
[root@Server ~]#
Updated by saen acro over 6 years ago
Are you configure it correctly?
is all transponders set?
Describe detail how lnb's are connected to tuner's
Updated by Ashok Jagesar about 6 years ago
saen acro wrote:
Are you configure it correctly?
is all transponders set?Describe detail how lnb's are connected to tuner's
4 Quattro LNB v/l h/l v/h h/h
connected to
Poort A = 28.2E : Astra 2A/2C/2E/2F/Eutelsat 28A
Poort B = 19.2E : Astra 1KR/1L/1M/1N
Poort C = 23.5E : Astra 3B
Poort D = 13E : Eutelsat Hot Bird 13B/13C/13D
are conneted to this diseq
Diseqc Multiswitch DMS 17/32
from here i have connected all tunners
Updated by Jaroslav Kysela about 6 years ago
Updated by - Status changed from New to Invalid
Ask in the forum or IRC for the user help.