Project

General

Profile

Bug #4908

Services not read from TSID 0 excepted mux

Added by blue note almost 7 years ago. Updated over 6 years ago.

Status:
Fixed
Priority:
Normal
Assignee:
-
Category:
Service Mapping
Target version:
-
Start date:
2018-02-01
Due date:
% Done:

100%

Estimated time:
Found in version:
4.3-1013~gd86d26b0e
Affected Versions:

Description

With the same mux config as a working installation, this mux failed to scan any services. [Because the broadcaster had changed most likely]. Checking the logs, tvh complained about a 0 TSID value. Unticking the 'ignore 0 TSID' did then allow the mux to scan the 4 services. However, no channel or service name info populated.

60 seconds of the mux stream: https://mega.nz/#!2BVFwbLB!DyeOX1TNPzcem-RvC_u3_vmxqN1UtDNLyk2jzwR7SsA

Files

dvbinspector.png (181 KB) dvbinspector.png Mark Clarkstone, 2018-02-01 20:12

History

#1

Updated by blue note almost 7 years ago

With the same mux config as a working installation, this mux failed to scan any services. [Because the broadcaster had changed most likely]. Checking the logs, tvh complained about a 0 TSID value. Unticking the 'ignore 0 TSID' did then allow the mux to scan the 4 services. However, no channel or service name info populated.

60 seconds of the mux stream: https://mega.nz/#!2BVFwbLB!DyeOX1TNPzcem-RvC_u3_vmxqN1UtDNLyk2jzwR7SsA

Screenshot: https://imgur.com/a/L1Nm3 (note I played with the EIT tick box, but it did not seem to change the results)

#2

Updated by Jaroslav Kysela almost 7 years ago

  • Status changed from New to Invalid

The requested info is just not there.

#3

Updated by blue note almost 7 years ago

I hope this isn't missing the point, just want to be compelte. My non internet connected old crappy Dynex TV does populate all fields somehow over the antenna (channel names and numbers, guide info) (here's some pics): http://imgur.com/gallery/gVBP6

#4

Updated by Mark Clarkstone almost 7 years ago

Jaroslav Kysela wrote:

The requested info is just not there.

Using the sample..

It's in the PID (8187) under table_id 0xC8 (200)

#5

Updated by blue note almost 7 years ago

Just for completeness, I guess it's related that this channel will not pick up OTA guide data either. It seems guide data is present since the TV reads the guide data from the channel.

#6

Updated by Jaroslav Kysela almost 7 years ago

  • Status changed from Invalid to New

It appears like ATSC data. You should describe your data source next time. Thanks.

#7

Updated by blue note over 6 years ago

Jaroslav Kysela wrote:

It appears like ATSC data. You should describe your data source next time. Thanks.

It is ATSC, sorry, I'll make sure I point that out next time. Thanks for looking at this.

#8

Updated by Jaroslav Kysela over 6 years ago

  • Status changed from New to Fixed
  • % Done changed from 0 to 100

Applied in changeset commit:tvheadend|6744ea1976e05d33e0383112f1ca75a7e7be0dfb.

Also available in: Atom PDF