Project

General

Profile

Feature #4905

Add NVIDIA's NVENC - encoding options with HW acceleration

Added by Ricardo Rocha almost 7 years ago. Updated over 6 years ago.

Status:
New
Priority:
Normal
Category:
Transcoding
Target version:
-
Start date:
2018-01-30
Due date:
% Done:

0%

Estimated time:

Description

Now that we have vaapi\nvenc working inside tvheadend could it be possible to add a few more options to the NVENC?

My idea is to be able to choose from:

Hardware acceleration methods:
cuda
cuvid

and them the decoder:

V..... h264_cuvid           Nvidia CUVID H264 decoder (codec h264)
V..... hevc_cuvid Nvidia CUVID HEVC decoder (codec hevc)
....etc

and respective options like:

-deint             <int>        .D.V.... Set deinterlacing mode (from 0 to 2) (default weave)
weave .D.V.... Weave deinterlacing (do nothing)
bob .D.V.... Bob deinterlacing
adaptive .D.V.... Adaptive deinterlacing
-gpu <string> .D.V.... GPU to be used for decoding
-surfaces <int> .D.V.... Maximum surfaces to be used for decoding (from 0 to INT_MAX) (default 25)
-drop_second_field <boolean> .D.V.... Drop second field when deinterlacing (default false)
-crop <string> .D.V.... Crop (top)x(bottom)x(left)x(right)
-resize <string> .D.V.... Resize (width)x(height)

and finally the encoders options

like (h264)

-preset <int> E..V.... Set the encoding preset (from 0 to 11) (default medium)
default E..V....
slow E..V.... hq 2 passes
medium E..V.... hq 1 pass
fast E..V.... hp 1 pass
hp E..V....
hq E..V....
bd E..V....
ll E..V.... low latency
llhq E..V.... low latency hq
llhp E..V.... low latency hp
lossless E..V....
losslesshp E..V....
-profile <int> E..V.... Set the encoding profile (from 0 to 3) (default main)
baseline E..V....
main E..V....
high E..V....
high444p E..V....
-level <int> E..V.... Set the encoding level restriction (from 0 to 51) (default auto)
auto E..V....
1 E..V....
1.0 E..V....
1b E..V....
1.0b E..V....
1.1 E..V....
1.2 E..V....
1.3 E..V....
2 E..V....
2.0 E..V....
2.1 E..V....
2.2 E..V....
3 E..V....
3.0 E..V....
3.1 E..V....
3.2 E..V....
4 E..V....
4.0 E..V....
4.1 E..V....
4.2 E..V....
5 E..V....
5.0 E..V....
5.1 E..V....
-rc <int> E..V.... Override the preset rate-control (from -1 to INT_MAX) (default -1)
constqp E..V.... Constant QP mode
vbr E..V.... Variable bitrate mode
cbr E..V.... Constant bitrate mode
vbr_minqp E..V.... Variable bitrate mode with MinQP (deprecated)
ll_2pass_quality E..V.... Multi-pass optimized for image quality (deprecated)
ll_2pass_size E..V.... Multi-pass optimized for constant frame size (deprecated)
vbr_2pass E..V.... Multi-pass variable bitrate mode (deprecated)
cbr_ld_hq E..V.... Constant bitrate low delay high quality mode
cbr_hq E..V.... Constant bitrate high quality mode
vbr_hq E..V.... Variable bitrate high quality mode
-rc-lookahead <int> E..V.... Number of frames to look ahead for rate-control (from 0 to INT_MAX) (default 0)
-surfaces <int> E..V.... Number of concurrent surfaces (from 0 to 64) (default 0)
-cbr <boolean> E..V.... Use cbr encoding mode (default false)
-2pass <boolean> E..V.... Use 2pass encoding mode (default auto)
-gpu <int> E..V.... Selects which NVENC capable GPU to use. First GPU is 0, second is 1, and so on. (from -2 to INT_MAX) (default any)
any E..V.... Pick the first device available
list E..V.... List the available devices
-delay <int> E..V.... Delay frame output by the given amount of frames (from 0 to INT_MAX) (default INT_MAX)
-no-scenecut <boolean> E..V.... When lookahead is enabled, set this to 1 to disable adaptive I-frame insertion at scene cuts (default false)
-forced-idr <boolean> E..V.... If forcing keyframes, force them as IDR frames. (default false)
-b_adapt <boolean> E..V.... When lookahead is enabled, set this to 0 to disable adaptive B-frame decision (default true)
-spatial-aq <boolean> E..V.... set to 1 to enable Spatial AQ (default false)
-temporal-aq <boolean> E..V.... set to 1 to enable Temporal AQ (default false)
-zerolatency <boolean> E..V.... Set 1 to indicate zero latency operation (no reordering delay) (default false)
-nonref_p <boolean> E..V.... Set this to 1 to enable automatic insertion of non-reference P-frames (default false)
-strict_gop <boolean> E..V.... Set 1 to minimize GOP-to-GOP rate fluctuations (default false)
-aq-strength <int> E..V.... When Spatial AQ is enabled, this field is used to specify AQ strength. AQ strength scale is from 1 (low) - 15 (aggressive) (from 1 to 15) (default 8)
-cq <float> E..V.... Set target quality level (0 to 51, 0 means automatic) for constant quality mode in VBR rate control (from 0 to 51) (default 0)
-aud <boolean> E..V.... Use access unit delimiters (default false)
-bluray-compat <boolean> E..V.... Bluray compatibility workarounds (default false)
-init_qpP <int> E..V.... Initial QP value for P frame (from -1 to 51) (default -1)
-init_qpB <int> E..V.... Initial QP value for B frame (from -1 to 51) (default -1)
-init_qpI <int> E..V.... Initial QP value for I frame (from -1 to 51) (default -1)
-qp <int> E..V.... Constant quantization parameter rate control method (from -1 to 51) (default -1)
-weighted_pred <int> E..V.... Set 1 to enable weighted prediction (from 0 to 1) (default 0)
-coder <int> E..V.... Coder type (from -1 to 2) (default default)
default E..V....
auto E..V....
cabac E..V....
cavlc E..V....
ac E..V....
vlc E..V....

and (hevc)

-preset <int> E..V.... Set the encoding preset (from 0 to 11) (default medium)
default E..V....
slow E..V.... hq 2 passes
medium E..V.... hq 1 pass
fast E..V.... hp 1 pass
hp E..V....
hq E..V....
bd E..V....
ll E..V.... low latency
llhq E..V.... low latency hq
llhp E..V.... low latency hp
lossless E..V.... lossless
losslesshp E..V.... lossless hp
-profile <int> E..V.... Set the encoding profile (from 0 to 4) (default main)
main E..V....
main10 E..V....
rext E..V....
-level <int> E..V.... Set the encoding level restriction (from 0 to 186) (default auto)
auto E..V....
1 E..V....
1.0 E..V....
2 E..V....
2.0 E..V....
2.1 E..V....
3 E..V....
3.0 E..V....
3.1 E..V....
4 E..V....
4.0 E..V....
4.1 E..V....
5 E..V....
5.0 E..V....
5.1 E..V....
5.2 E..V....
6 E..V....
6.0 E..V....
6.1 E..V....
6.2 E..V....
-tier <int> E..V.... Set the encoding tier (from 0 to 1) (default main)
main E..V....
high E..V....
-rc <int> E..V.... Override the preset rate-control (from -1 to INT_MAX) (default -1)
constqp E..V.... Constant QP mode
vbr E..V.... Variable bitrate mode
cbr E..V.... Constant bitrate mode
vbr_minqp E..V.... Variable bitrate mode with MinQP (deprecated)
ll_2pass_quality E..V.... Multi-pass optimized for image quality (deprecated)
ll_2pass_size E..V.... Multi-pass optimized for constant frame size (deprecated)
vbr_2pass E..V.... Multi-pass variable bitrate mode (deprecated)
cbr_ld_hq E..V.... Constant bitrate low delay high quality mode
cbr_hq E..V.... Constant bitrate high quality mode
vbr_hq E..V.... Variable bitrate high quality mode
-rc-lookahead <int> E..V.... Number of frames to look ahead for rate-control (from 0 to INT_MAX) (default 0)
-surfaces <int> E..V.... Number of concurrent surfaces (from 0 to 64) (default 0)
-cbr <boolean> E..V.... Use cbr encoding mode (default false)
-2pass <boolean> E..V.... Use 2pass encoding mode (default auto)
-gpu <int> E..V.... Selects which NVENC capable GPU to use. First GPU is 0, second is 1, and so on. (from -2 to INT_MAX) (default any)
any E..V.... Pick the first device available
list E..V.... List the available devices
-delay <int> E..V.... Delay frame output by the given amount of frames (from 0 to INT_MAX) (default INT_MAX)
-no-scenecut <boolean> E..V.... When lookahead is enabled, set this to 1 to disable adaptive I-frame insertion at scene cuts (default false)
-forced-idr <boolean> E..V.... If forcing keyframes, force them as IDR frames. (default false)
-spatial_aq <boolean> E..V.... set to 1 to enable Spatial AQ (default false)
-temporal_aq <boolean> E..V.... set to 1 to enable Temporal AQ (default false)
-zerolatency <boolean> E..V.... Set 1 to indicate zero latency operation (no reordering delay) (default false)
-nonref_p <boolean> E..V.... Set this to 1 to enable automatic insertion of non-reference P-frames (default false)
-strict_gop <boolean> E..V.... Set 1 to minimize GOP-to-GOP rate fluctuations (default false)
-aq-strength <int> E..V.... When Spatial AQ is enabled, this field is used to specify AQ strength. AQ strength scale is from 1 (low) - 15 (aggressive) (from 1 to 15) (default 8)
-cq <float> E..V.... Set target quality level (0 to 51, 0 means automatic) for constant quality mode in VBR rate control (from 0 to 51) (default 0)
-aud <boolean> E..V.... Use access unit delimiters (default false)
-bluray-compat <boolean> E..V.... Bluray compatibility workarounds (default false)
-init_qpP <int> E..V.... Initial QP value for P frame (from -1 to 51) (default -1)
-init_qpB <int> E..V.... Initial QP value for B frame (from -1 to 51) (default -1)
-init_qpI <int> E..V.... Initial QP value for I frame (from -1 to 51) (default -1)
-qp <int> E..V.... Constant quantization parameter rate control method (from -1 to 51) (default -1)
-weighted_pred <int> E..V.... Set 1 to enable weighted prediction (from 0 to 1) (default 0)

this also could be done with a "box" to run a custom command!

I also understand that we allready have the spawn but from my tests it seens to have some lag maybe because of in/out with pipe!

Thanks

History

#1

Updated by Jaroslav Kysela almost 7 years ago

  • Subject changed from NVIDIA's NVENC - encoding options with HW acceleration to Add NVIDIA's NVENC - encoding options with HW acceleration

I've not found a time to add this (also I cannot test this easily).

#2

Updated by Ricardo Rocha almost 7 years ago

I could help with testing and if you want I have also a testbed that you can use.

Will this be good enough to arrange some time or do you prefer to do it another time?

#3

Updated by saen acro almost 7 years ago

+1
I also can test

#4

Updated by Ricardo Rocha almost 7 years ago

Thanks @saen acro i am having really really good results playing with cuvid as hw aceleration and as decoder with his own resize/deinterlace options.

Using 2 pass or lookahead the quality is really really good!

#5

Updated by Vlad Obrad over 6 years ago

Ricardo Rocha wrote:

...

Using 2 pass or lookahead the quality is really really good!

So that means it is already usable within tvheadend. My goal would be to use Nvidia GPU to deinterlace 1080i h264 channels with adaptive deinterlacing and then encode again to 1080p with high quality, maybe even to 1080p x265. Is that possible currently with tvheadend if I choose it in the transcoding options?

#6

Updated by saen acro over 6 years ago

Yes it id just make it available with hand made package

https://tvheadend.org/boards/4/topics/24116

AUTOBUILD_CONFIGURE_EXTRA=--enable-nvenc ./Autobuild.sh -j$(nproc)

Also available in: Atom PDF