Feature #4736
open
CICAM: MMI support in the WebUI and via HTSP
0%
Description
Several (if not all) hardware CAM modules also have a MMI CAM menu which allows to configure ie. CAM options and display some information (and be it only hard/software versions etc.). It'd be great if these menu could be made accessible either using TVHeadend's WebUI, and/or also via the HTSP protocol so it can be accessed by connected clients like Kodi (client specific settings or so).
Also, CAMs send some (textual) status information using MMI, like informal message when channels aren't subscribed or otherwise inaccessible. Getting that information to clients (again via HTSP) so they can display such messages would also be great.
Updated by Daniel Scheller over 7 years ago
Not exactly. That issue reads like some TBS card and CI interface support, but (even if there are mentions of menus and gnutv -cammenu) not specifically about that MMI resource stuff, which is accessible with every DVB adapter supported by mainline or thirdparty driver package that exposes a adapterX/caY device node below /dev/dvb/.
Updated by saen acro over 7 years ago
dvben50221 is base of CAM module support
GNUTV is only software with is used all tv-s and stb-s and pro devices use it as base.
Yes I agree CI web interface is something with is needed
Updated by saen acro over 7 years ago
... during scan
2017-11-24 18:11:27.954 en50221: dvbca0: MMI menu from CAM in the slot 0: 2017-11-24 18:11:27.954 en50221: dvbca0: title: XCRYPT 2017-11-24 18:11:27.954 en50221: dvbca0: subtitle: No Access 2017-11-24 18:11:27.954 en50221: dvbca0: bottom: Press EXIT
just UI is needed
Updated by Mono Polimorph over 7 years ago
saen acro wrote:
just UI is needed
So, as #4738 is now closed... I suggest to tag this for 4.4 or 4.6.