Bug #4273
Dual DD DVB-S Tuners not picked up correctly
0%
Description
With a fresh install of 4.1-2449~gda583493d, my twin DD DVB-T tuners are not correctly detected. Only 2 of the 4 available tuners are usable (can be assigned to networks). Adapter 3 and adapter 4 in the following screengrab are the problematic devices;
If I install v4.0.9, the tuners are correctly detected and all 4x DVB-S devices are fully configurable. Furthermore, upgrading from 4.0.9 to 4.1-2449~gda583493d results in the tuners remaining available (likely due to the same config being used)
My system is unRAID DVB Edition ([[https://forums.lime-technology.com/topic/46194-unraid-dvb-edition/]]). Linux Kernel v4.9.10
I use an Octopus Classic PCIe with 2x DuoFlex S2 daughtercards and 1x DuoFlex C/T daughtercard.
I run TvHeadEnd in a Docker ([[https://forums.lime-technology.com/topic/49898-support-linuxserverio-tvheadend/]])
This is not a hardware driver issue. I have tested with DD driver versions v0.9.28v7a, v0.9.28 and v0.9.26 with the same results
History
Updated by saen acro over 7 years ago
MAK address identification also will be good
some cheap tuners haven't mak address buts its not problem
Updated by Jaroslav Kysela over 7 years ago
What's the contents of the right form area when you click to the 'STV090x Multistandard : DVB-S #0'? Also, attach the config file in the TVH_CONFIG_DIRECTORY/input/linuxdvb/adapter directory.
Updated by Jaroslav Kysela over 7 years ago
Jaroslav Kysela wrote:
What's the contents of the right form area when you click to the 'STV090x Multistandard : DVB-S #0'? Also, attach the config file in the TVH_CONFIG_DIRECTORY/input/linuxdvb/adapter directory.
'STV090x Multistandard : DVB-S #0' for /dev/dvb/adapter3