Feature #2330
3.4? Tuner in use always reported as #0 on Status page and in log
0%
Description
I'm not sure is this should be categorized as a bug or a feature request but when you are viewing the details of a recording in progress on the status page or in the log, using a card with multiple tuners, it always reports that #0 is being used, for example:
TurboSight TBS 6991SE DVBS/S2 frontend : DVB-S #0
I'd like to be able to see which tuner is actually being used. For example, that is a dual tuner card, so it would be better if it would display sometghing like #0:0 for the first tuner, and #0:1 for the second tuner - this is assuming that the first digit refers to the card or adapter number. So if a second card were installed and the second tuner on that card were being used, it could show "#1:1", etc.
The reason I am entering this as a bug is that I am not sure if the #0 was actually supposed to accurately show a tuner number, but for some reason is not doing so. If in fact that is supposed to be the card number, then please feel free to recategorize this as a feature request. Thank you.
History
Updated by K Shea about 10 years ago
I'm not sure is this should be categorized as a bug or a feature request but when you are viewing the details of a recording in progress on the status page or in the log, using a card with multiple tuners, it always reports that #0 is being used, for example:
TurboSight TBS 6991SE DVBS/S2 frontend : DVB-S #0
I'd like to be able to see which tuner is actually being used. For example, that is a dual tuner card, so it would be better if it would display something like #0:0 for the first tuner, and #0:1 for the second tuner - this is assuming that the first digit refers to the card or adapter number. So if a second card were installed and the second tuner on that card were being used, it could show "#1:1", etc.
The reason I am entering this as a bug is that I am not sure if the #0 was actually supposed to accurately show a tuner number, but for some reason is not doing so. If in fact that is supposed to be the card number, then please feel free to recategorize this as a feature request. Thank you.
Updated by K Shea about 10 years ago
Apparently the "Edit" link doesn't actually edit the text, it just creates an entirely new entry. Sorry about the duplicate text, was just trying to correct a spelling error.
Updated by Mark Clarkstone about 10 years ago
- Tracker changed from Bug to Feature
- Category set to User Interface
- Priority changed from Normal to Low
Updated by Miro K. about 10 years ago
You are free to change the tuner name on the configuration site. Just select the name beneath /dev/dvb/adapterX and on the right site you just type, what you whish.. (speaking about 3.9.xxxx versions)
Updated by Jaroslav Kysela about 10 years ago
- Subject changed from Tuner in use always reported as #0 on Status page and in log to 3.4? Tuner in use always reported as #0 on Status page and in log