Project

General

Profile

Bug #2183

Continuity errors and screen pixelation (corruption) when using tvheadend.

Added by Viktor Kuzmin over 10 years ago. Updated about 10 years ago.

Status:
Invalid
Priority:
Normal
Assignee:
-
Category:
DVB
Target version:
-
Start date:
2014-07-21
Due date:
% Done:

0%

Estimated time:
Found in version:
3.9.1084~gf72733f
Affected Versions:

Description

Hello. I'm using tvheadend with tbs6985 (4 adapters). I'm using opensource drivers from Luis.
Steps to reproduce problem:
1) Start tv channel on one adapter.
2) Start tv channel on another client on second adapter.
3) In 50% times you will get continuity errors on first adapter during tuning on second.

I've tried to setup dvblink trial and rearranged adapters (starting from all belongs to dvblink then 1 to tvheadend + 3 to dvblink e.t.c.).
And it appeared that there no corruption during watching on dvblink even if I switch channels in tvheadend. There were no corruptions when I was watching in tvheadend and switching channels in dvblink. But there were corruptions with tvheadend when I switch channels on another adapter which was controlled by tvheadend.

History

#1

Updated by Viktor Kuzmin over 10 years ago

I've tried setup with VDR. I have no issues with VDR at all. No continuity errors, no transport errors e.t.c.

#2

Updated by Mario D over 10 years ago

I had a similar problem with two adapters on the same LNB. In my case it was an LNB with a poor isolation: I got discontinuity errors on a cable during retuning on the other cable. It could be not your case if you say that with VDR the same operations work well.

#3

Updated by Viktor Kuzmin over 10 years ago

Please, close the bug. The problem is in tbs6985 hardware and not in tvheadend.

#4

Updated by Jaroslav Kysela about 10 years ago

  • Status changed from New to Invalid

Also available in: Atom PDF