Project

General

Profile

Forums » General »

Help configuring channels/muxes

Added by Anonymous about 11 years ago

This is my first time using this program and like the possibilities and an excited to use it, but I am having some issues.

First off my setup: Raspberry pi, running newest stable build, with a TV Wonder 600 usb. (I have put the appropriate firmware in etc/firmware and seems like it is using it)

I enabled tvheadend and am using the webgui for all that I am trying.

If I go to Configuration, and choose DVB inputs, I choose my adapter, then add DVB Network by location. I choose US_ATSC_center_frequencies and it picks up 28 services (which is about right). However I cannot map services to channels, and the multiplexes and services have no data, although I can hit play and the tv shows seem to work.

Can anyone help me out?

1.PNG (212 KB) 1.PNG
2.PNG (221 KB) 2.PNG
3.PNG (96.3 KB) 3.PNG

Replies (5)

RE: Help configuring channels/muxes - Added by Ralf Jahns about 11 years ago

Same here. Should it look different? I can see all the channel names and assign numbers in "channel /EPG".

RE: Help configuring channels/muxes - Added by Donald Schlicht about 11 years ago

I have the same problem. I am using an x86 HTPC with Openelec. I get 51 services again which is most or less correct. However channels are not mapped. I have tried to manually enter channel name however that name will not show up in XBMC nor will it persist across a reboot.

RE: Help configuring channels/muxes - Added by Donald Schlicht about 11 years ago

Well I have part of my problem solved. It appears the TVHeadEnd version 3.4 is completely broken as fas as ATSC and HDHomerunner is concerned. I found a posting where some people had luck going to a previous version of TVHeadEnd. I installed version 3.2.18~g40a8920 and now it looks like all of the channels are loading and configuring correctly.

Now I need to proceed to get the EPG working.

RE: Help configuring channels/muxes - Added by Anonymous about 11 years ago

So they map correctly now?

How did you revert to the prev version?

RE: Help configuring channels/muxes - Added by Donald Schlicht about 11 years ago

Yes I had to manually map the channels to guide items. Once I did that the EPG came up correctly.

In order to revert to a previously version of TVHeadEnd, I uninstalled the existing one via XBMC. I then used ssh to delete the add_on data folder for TVHeadEnd. I then got a copy of the previous release from:
http://openelec.tv/forum/79-tvheadend/52322-solved-new-tvheadend-binary-or-add-on

    (1-5/5)